Approved
Last Updated: 04 Nov 2019 14:57 by ADMIN
Chetan
Created on: 03 Nov 2019 18:34
Category: Editor
Type: Bug Report
0
Table on reject track changes removed to complete td

Hi Rumen,

 

I have encountered a problem as follows:

When a table is added to the radeditor with empty cells, after inserting text in  the empty cell and rejecting the track changes, the complete td (cell) is removed.

Figure shows text inserted in empty cell with track changes on

After rejecting this track changes:

The cell has been removed and you can see the space in the end

You can use the following table code to reproduce the same, I have tried this in the demo link: https://demos.telerik.com/aspnet-ajax/editor/examples/trackchanges/defaultcs.aspx

<table frame="topbot" class="body_table">
    <thead>
        <tr>
            <th class="td_h">Catalyst</th>
            <th class="td_h">Loading [mg cm<sup>&minus;2</sup>]</th>
            <th class="td_h">Tafel slope [mV decade<sup>&minus;1</sup>]</th>
            <th class="td_h">ECSA [cm<sup>2</sup>]</th>
            <th class="td_h"><em>R</em><sub>ct</sub> at &eta; = 100 mV [&Omega;]</th>
            <th class="td_h">&eta; @ <sub>&minus;</sub>10 mA cm<sup>&minus;2</sup><sub>geo</sub> [mV]</th>
            <th class="td_h">&eta; @ &minus;0.2 mA cm<sup>&minus;2</sup><sub>ECSA</sub> [mV]</th>
            <th class="td_h">Current at &eta; = 100 mV [mA cm<sup>&minus;2</sup>]</th>
            <th class="td_h">Mass activity at &eta; = 100 mV [A g<sup>&minus;1</sup>]</th>
            <th class="td_h">TOF<sub>avg</sub> at &eta; = 100 mV (H<sub>2</sub> s<sup>&minus;1</sup>)</th>
        </tr>
    </thead>
    <tbody>
        <tr>
            <td class="td1">0.1 C anodized</td>
            <td class="td1">0.081</td>
            <td class="td1">52</td>
            <td class="td1"><ins author="RadEditorUser" command="Insert" timestamp="1572804414617" title="Inserted by RadEditorUser on 11/3/2019, 11:36:54 PM" class="reU0">fdff</ins></td>
            <td class="td1">4.6</td>
            <td class="td1">51</td>
            <td class="td1">74</td>
            <td class="td1">&minus;67.00</td>
            <td class="td1">827.55</td>
            <td class="td1">0.93</td>
        </tr>
        <tr>
            <td class="td1">2.0 C anodized</td>
            <td class="td1">0.172</td>
            <td class="td1">78</td>
            <td class="td1">191.9</td>
            <td class="td1">7.6</td>
            <td class="td1">88</td>
            <td class="td1">122</td>
            <td class="td1">&minus;15.10</td>
            <td class="td1">87.88</td>
            <td class="td1">0.13</td>
        </tr>
        <tr>
            <td class="td1">0.1 C O<sub>2</sub> plasma</td>
            <td class="td1">0.045</td>
            <td class="td1">48</td>
            <td class="td1">5.8</td>
            <td class="td1">3.9</td>
            <td class="td1">78</td>
            <td class="td1">34</td>
            <td class="td1">&minus;24.97</td>
            <td class="td1">559.87</td>
            <td class="td1">6.96</td>
        </tr>
        <tr>
            <td class="td1">2.0 C O<sub>2</sub> plasma</td>
            <td class="td1">0.177</td>
            <td class="td1">84</td>
            <td class="td1">103.4</td>
            <td class="td1">5.0</td>
            <td class="td1">123</td>
            <td class="td1">146</td>
            <td class="td1">&minus;4.65</td>
            <td class="td1">26.25</td>
            <td class="td1">0.072</td>
        </tr>
        <tr>
            <td class="td1">0.1 C heat</td>
            <td class="td1">0.037</td>
            <td class="td1">58</td>
            <td class="td1">7.6</td>
            <td class="td1">94.1</td>
            <td class="td1">163</td>
            <td class="td1">110</td>
            <td class="td1">&minus;0.95</td>
            <td class="td1">25.75</td>
            <td class="td1">0.302</td>
        </tr>
        <tr>
            <td class="td1">2.0 C heat</td>
            <td class="td1">0.630</td>
            <td class="td1">80</td>
            <td class="td1">11.5</td>
            <td class="td1">36.6</td>
            <td class="td1">106</td>
            <td class="td1">65</td>
            <td class="td1">&minus;8.24</td>
            <td class="td1">13.07</td>
            <td class="td1">0.662</td>
        </tr>
        <tr>
            <td class="td1">0.1 C acid</td>
            <td class="td1">0.103</td>
            <td class="td1">70</td>
            <td class="td1">11.1</td>
            <td class="td1">165.2</td>
            <td class="td1">162</td>
            <td class="td1">126</td>
            <td class="td1">&minus;2.09</td>
            <td class="td1"></td>
            <td class="td1">0.199</td>
        </tr>
        <tr>
            <td class="td1">2.0 C acid</td>
            <td class="td1">0.683</td>
            <td class="td1">75</td>
            <td class="td1">22.9</td>
            <td class="td1">14.1</td>
            <td class="td1">102</td>
            <td class="td1">101</td>
            <td class="td1">&minus;9.48</td>
            <td class="td1">13.88</td>
            <td class="td1">1.15</td>
        </tr>
    </tbody>
</table>

Do let me know if you need any further information on the same.

Thanks

Regards

Chetan

 

 

1 comment
ADMIN
Rumen
Posted on: 04 Nov 2019 14:57

Hi Chetan,

Thank you for reporting this bug!

I tested it, confirmed and approved it as a bug. I also made the report public so that everybody gets aware of it and can vote for its prioritization in the backlog.

This is a new bug and a temporary workaround is currently not available.

As a small token of gratitude for your report, I also updated your Telerik points.


Bst Regards,
Rumen
Progress Telerik

Get quickly onboarded and successful with your Telerik and/or Kendo UI products with the Virtual Classroom free technical training, available to all active customers. Learn More.