Currenty, when the Grid is in InCell edit mode, if a column binds to a boolean field, it is required a custom logic to display the field as a checkbox, which is always in edit mode and can be updated through a single click. Here is a REPL sample that shows the example:

https://netcorerepl.telerik.com/GJOhEIkj47P2xHf709

My opinion is that this functionality should work correctly out of the box without additional coding. If this is not available, then there should be an applicable sample code.

Is it possible to make an example where EF, Dirty works, no double click required and the checkbox always looks like a checkbox?

Starting with version 2025.2.520, the toolbar tools like "Save changes" and "Cancel changes" are hidden by default. When the ShowInactiveTools(true) option is set, the inactive tools are displayed as disabled until a change in the Grid's data is made (for example, the tools are active when the edited cell is closed).

Is it possible to create an option that enables the previous behavior of the inactive toolbar tools - to keep the tools always active and visible no matter if there is a change or not?

For example:

.ToolBar(toolbar =>toolbar
            .Items(itm =>
            {
                itm.Create();
                itm.Save();
            })
            .EnableInactiveTools(true)
)

Bug report

The rowReorder event does not return the correct newIndex when dragging a row from a lower row index to a higher row index.

Reproduction of the problem

1. Run this dojo https://dojo.telerik.com/omyPpaZb
2. Drag Chai and drop after Chang. Note oldIndex is 0, newIndex is 2, which is unexpected as indices are 0-based

3. Re-run the dojo to start fresh and drag Chang and drop before Chai and the indices are correct - oldIndex: 1, newIndex: 0

Current behavior

The returned newIndex is incorrect.

Expected/desired behavior

The returned newIndex should be correct.

Environment

• Kendo UI version: 2025.2.520
• Browser: [all]

### Bug report

When an Editor component in inline mode is set as an editor in an InCell editable Grid, the Grid cell does not enter edit mode on "click". The issue occurs since version 2023.1.314.

### Reproduction of the problem

1) Create an InCell editable Grid.

2) Set an Editor component in inline mode as an editor to a specified Grid column.

3) Try to edit the cell.

4) The cell flashes and does not enter edit mode.

A Dojo sample for reporduction: https://dojo.telerik.com/zQUvDQEq (check out the "ProductName" column)

### Expected/desired behavior

The Grid column that uses Editor component in inline mode must be editable.

### Environment

* **Kendo UI version: since 2023.1.314
* **jQuery version: 3.4.1
* **Browser: [all]

As a result of an EF Core issue, the ToDataSourceResult() is not able to perform the query when the DataSourceRequest object contains grouping.

The problem occurs using the query below, assembled by Telerik routine:

var temp = _db.Pessoa
    .OrderBy(item => item.Email)
    .Skip(0)
    .Take(40)
    .GroupBy(item => item.Email)
    .OrderBy(g => g.Key)
    .Select(g => new AggregateFunctionsGroup
    {
        Key = g.Key,
        ItemCount = g.Count(),
        HasSubgroups = false,
        Member = "Email",
        AggregateFunctionsProjection = new
        {
            Count_Referencia = _db.Pessoa
                    .Select(t => new
                    {
                        t.IdPessoa,
                        t.Referencia,
                        t.Nome_RazaoSocial,
                        t.Apelido_Fantasia,
                        t.CPF_CNPJ,
                        t.RG_IE,
                        t.Email
                    })
                    .OrderBy(item => item.Email)
                    .Where(item => item.Email == g.Key)
                    .Count()
        },
        Items = g
    })
    .ToList();

In the routine where the AggregateFunctionsGroup is created, the Items property must not only be the query itself, but also the fields specified in the main Select. Or, the call to the Select() method must simply be added:

var temp = _db.Pessoa
    .OrderBy(item => item.Email)
    .Skip(0)
    .Take(40)
    .GroupBy(item => item.Email)
    .OrderBy(g => g.Key)
    .Select(g => new AggregateFunctionsGroup
    {
        Key = g.Key,
        ItemCount = g.Count(),
        HasSubgroups = false,
        Member = "Email",
        AggregateFunctionsProjection = new
        {
            Count_Referencia = _db.Pessoa
                    .Select(t => new
                    {
                        t.IdPessoa,
                        ...
                    })
                    .OrderBy(item => item.Email)
                    .Where(item => item.Email == g.Key)
                    .Count()
        },
        Items = g.Select(t => new
        {
            t.IdPessoa,
            ...
        })
    })
    .ToList();

This way, the issue does not occur.

The grid must allow changes to be made in specific cells, without those changes being committed/saved unless the user clicks on the "Save" button in the toolbar. Basically the users enter in some values for editable currency columns that aren't locked, and (without saving) some columns (both locked and not locked) that are not editable must be refreshed as the value in those cells depend on the edited column. Those cells have client templates and client footer templates which need to be used by whatever is refreshing their cells.

Having this functionality provided built-in will be a nice addition:
https://docs.telerik.com/kendo-ui/knowledge-base/grid-update-particular-row-without-refresh

Current configuration: server-side filtering

Desired behavior:

1. Grid searches are "anded" to any existing filters
2.  When the search box is cleared the pre-existing filters are retained

### Bug report

When the Grid is initialized in a hidden container (for example, in a non-selected tab of a TabStrip) and its initial data binding is disabled (autoBind: false), the pager information is not visible when the data is loaded afterward.

### Reproduction of the problem

1. Initialize a Grid into a non-selected tab of a TabStrip and set its autoBind option to "false".

2. Select the tab and check how the empty Grid is rendered.

3. Call the read() method of the Grid's DataSource in the browser console to request the data.

4. The data is loaded, but the pager information remains hidden.

A Dojo sample for reproduction: https://dojo.telerik.com/njVgBvza

### Expected/desired behavior

The pager information must be available when the data is loaded into the Grid.

### Environment

* **Kendo UI version: 2024.4.1112
* **jQuery version: 3.7.1
* **Browser: [all]

Is it possible to implement template options for the "update" and "cancel" column commands of the Grid?

For example:

$("#grid").kendoGrid({
  columns: [{ 
    command: [{
        name: "edit",
        template: {
            update: "<button class='customUpdate'>Save</button>",
            cancel: "<button class='customCancel'>Cancel</button>",
          }
      }]
   }],
  ...
});

By default, when the "paste" command is added, the default option is "insert" mode ("Paste (Insert)"). Is it possible to add an option that allows setting the default paste mode to "replace" ("Paste (Replace)")?

Currently, when using the default Grid search functionality and the column filter menus, we observe the following:

• When a column filter is applied first, using the Search feature afterward overrides the column filters, applying the search filter with the "contains" operator to the specified columns.
• Conversely, when a search is performed first and then followed by a column filter, the grid generally functions as expected.

However, there’s a specific scenario where this does not work properly:

• If a search is performed and then a column filter is applied to a column where the search criteria are relevant, the Grid returns no data.

For example:

• After searching for "2018," the expected columns displayed in the filters (notably, the ContractNumber is among them).

• When a column filter is subsequently applied to ContractNumber (e.g., setting it to "2018-CR0018"), the Grid removes the ContractNumber from the search filters and adds the column filter with an "AND" operator. This setup returns no data because of the search filters and the "AND" operator.

Expected Behavior and Alternative

This functionality behaves correctly in the Telerik UI for Blazor Grid component - the search and column filters are managed as separate objects.

Is it possible to enhance the Grid filtering similar to the Blazor Grid?

Hi, is there a way to configure the grid so that when it's grouped and later sorted, the grouping state (expanded/collapsed) is preserved?

Kind Regards

Erwin

It would be convenient to have built-in MultiColumnComboBox editing for the Grid.

I was hoping the component would show the addresses formatted in columns (as per a fields list) and then return the address concatenated into a single to the grid field (e.g. from .DataTextField("FullAddress")).

I'm in the process of rewriting all Kendo components to use CSP compatible templates. I'm looking at https://docs.telerik.com/aspnet-core/html-helpers/template/overview which shows how we'd use TemplateComponentName() for popup editors and that we would need to rewrite everything in the popup editor to use Kendo Template's AddHtml or AddComponent methods.

Original:

<div class="mb-2 row required">
	@Html.LabelFor(model => model.FileName, new { @class = "col-sm-4 col-form-label fw-bold text-sm-end" })
	<div class="col-sm-6">
		@(Html.Kendo().TextBoxFor(model => model.FileName).HtmlAttributes(new { @class = "w-100" }))
	</div>
</div>

<div class="mb-2 row">
	@Html.LabelFor(model => model.FileDescription, new { @class = "col-sm-4 col-form-label fw-bold text-sm-end" })
	<div class="col-sm-6">
		@(Html.Kendo().TextBoxFor(model => model.FileDescription).HtmlAttributes(new { @class = "w-100" }))
	</div>
</div>

Rewritten:

@(Html.Kendo().Template()
	.AddHtml("<div class='mb-2 row required'>")
	.AddHtml(@<text>
		@Html.LabelFor(model => model.FileName, new { @class = "col-sm-4 col-form-label fw-bold text-sm-end" })
	</text>)
	.AddHtml("<div class='col-sm-6'>")
	.AddComponent(c => c.TextBoxFor(model => model.FileName).HtmlAttributes(new { @class = "w-100" }))
	.AddHtml("</div></div>")

	.AddHtml("<div class='mb-2 row'>")
	.AddHtml(@<text>
		@Html.LabelFor(model => model.FileDescription, new { @class = "col-sm-4 col-form-label fw-bold text-sm-end" })
	</text>)
	.AddHtml("<div class='col-sm-6'>")
	.AddComponent(c => c.TextBoxFor(model => model.FileDescription).HtmlAttributes(new { @class = "w-100" }))
	.AddHtml("</div></div>")
)

While this works, this markup seems much harder to read than the original. Could this be made to be simpler? Ideally I'd like to be able to drop my existing mix of html and kendo components in one method and it'd parse through to render the template properly.

Bug report

When the Grid is nested in a relatively positioned container, during the export the Grid gets an overflow style to its wrapping element. Then the style is removed and re-added again. This happens in a loop, which results in a vertical scrollbar constantly appearing and hiding.

Reproduction of the problem

1. Open this dojo example: https://dojo.telerik.com/IZoxOvOG/7
2. Click the "Export to PDF" button in the Grid's toolbar

Current behavior

Flickering caused by a scrollbar appearing and hiding

Expected/desired behavior

The Grid should remain unchanged during the export and no scrollbar should appear and hide during the export.

Environment

• Kendo UI version: 2024.3.806
• jQuery version: x.y
• Browser: [all ]