Steps to reproduce.

1. Add a chart view to a form.
2. Create a series and add several data points. For categories use double values in the range 10 - 20
3. Create a second series and this time for categories use double values in the same range without duplication.
4. Assign one linear and one categorical axis to the series and add them to the char view.
5. Run the project and you will see that the categories from the second series are next to those from the first series, while they should be combined according their values.

Use LogarithmicAxis and set the Minimum to 0.1

Workaround is availble in the atched project.

The Line Series cannot be clicked/selected and cannot be used in DrillDown scenarios.

ChartLegendElement is not able to wrap the LegendItems

To reproduce: please refer to the attached sample project  and gif file illustrating the behavior on my end. 

Note: similar to the axis, the series should also have ClipLabels property which will control whether the labels will be clipped or not.

Workaround: use custom renderer:

 Sub New()

        InitializeComponent() 

        AddHandler Me.RadChartView1.CreateRenderer, AddressOf RadChartView1_CreateRenderer

        Dim barSeries As New Telerik.WinControls.UI.BarSeries("Performance", "RepresentativeName")
        barSeries.Name = "Q1"
        barSeries.ShowLabels = True
        barSeries.DataPoints.Add(New CategoricalDataPoint(177, "Harley"))
        barSeries.DataPoints.Add(New CategoricalDataPoint(128, "White"))
        barSeries.DataPoints.Add(New CategoricalDataPoint(143, "Smith"))
        barSeries.DataPoints.Add(New CategoricalDataPoint(111, "Jones"))
        barSeries.DataPoints.Add(New CategoricalDataPoint(118, "Marshall"))
        Me.RadChartView1.Series.Add(barSeries)
        Dim barSeries2 As New Telerik.WinControls.UI.BarSeries("Performance", "RepresentativeName")
        barSeries2.Name = "Q2"
        barSeries2.ShowLabels = True
        barSeries2.DataPoints.Add(New CategoricalDataPoint(153, "Harley"))
        barSeries2.DataPoints.Add(New CategoricalDataPoint(141, "White"))
        barSeries2.DataPoints.Add(New CategoricalDataPoint(130, "Smith"))
        barSeries2.DataPoints.Add(New CategoricalDataPoint(88, "Jones"))
        barSeries2.DataPoints.Add(New CategoricalDataPoint(109, "Marshall"))
        Me.RadChartView1.Series.Add(barSeries2)


        Dim lassoZoomController As New ChartPanZoomController()
        RadChartView1.Controllers.Add(lassoZoomController)

    End Sub
    
    Public Class CustomLabelElementDrawPart
        Inherits BarLabelElementDrawPart
        Public Sub New(owner As ChartSeries, renderer As IChartRenderer)
            MyBase.New(owner, renderer)

        End Sub

        Public Overrides Sub Draw()
            If Not Me.Element.ShowLabels Then
                Return
            End If

            Dim graphics As Graphics = TryCast(Me.Renderer.Surface, Graphics)
            Dim radGraphics As RadGdiGraphics = New RadGdiGraphics(graphics)
            Dim isSmartLabelsEnabled As Boolean = Me.Element.View.ShowSmartLabels
            Dim isLineToLabelEnabled As Boolean = Me.Element.DrawLinesToLabels

            For Each dataPointElement As DataPointElement In Me.Element.Children
                Dim categoricalDataPoint As CategoricalDataPoint = TryCast(dataPointElement.DataPoint, CategoricalDataPoint)


                For i As Integer = 0 To dataPointElement.Children.Count - 1
                    Dim labelElement As LabelElement = TryCast(dataPointElement.Children(i), LabelElement)

                    If labelElement Is Nothing Then
                        Continue For
                    End If

                    labelElement.OnLabelFormatting(New ChartViewLabelFormattingEventArgs(labelElement))

                    If Not labelElement.IsVisible OrElse String.IsNullOrEmpty(labelElement.Text) Then
                        Continue For
                    End If

                    Dim rect As Rectangle
                    Dim slot As RadRect = labelElement.GetLayoutSlot()

                    If isSmartLabelsEnabled AndAlso labelElement.SmartRectangle <> Rectangle.Empty Then
                        rect = labelElement.SmartRectangle
                    Else
                        slot = AdjustLayoutSlot(slot, labelElement.DataPointElement)
                        rect = ChartRenderer.ToRectangle(slot)
                    End If

                    Dim state As Object = radGraphics.SaveState()
                    Dim horizontalTranslate As Integer = rect.X + rect.Width / 2
                    Dim verticalTranslate As Integer = rect.Y + rect.Height / 2
                    Dim clipRect As RectangleF
                    If TypeOf Me.Renderer Is CartesianRenderer Then
                        Dim size As SizeF = graphics.MeasureString("W", Me.Element.Font)
                        Dim plotRect As RadRect = Me.Element.Model.LayoutSlot
                        plotRect.X += Me.ViewportOffsetX
                        plotRect.Y += Me.ViewportOffsetY
                        clipRect = ChartRenderer.ToRectangleF(plotRect)
                        clipRect.Y -= size.Height / 2.0F
                        clipRect.Height += size.Height
                        clipRect.Width += size.Width * 2.0F
                        graphics.SetClip(clipRect)
                    End If

                    Dim angle As Single = CSng(Me.Element.LabelRotationAngle) Mod 360.0F

                    If angle <> 0 Then
                        radGraphics.TranslateTransform(horizontalTranslate, verticalTranslate)
                        radGraphics.RotateTransform(angle)
                        radGraphics.TranslateTransform(-horizontalTranslate, -verticalTranslate)
                    End If

                    If isLineToLabelEnabled Then
                        Me.DrawConnectingLine(radGraphics, labelElement, dataPointElement, isSmartLabelsEnabled AndAlso labelElement.SmartRectangle <> Rectangle.Empty)
                    End If

                    If labelElement.BackgroundShape IsNot Nothing Then
                        labelElement.BackgroundShape.Paint(CType(radGraphics.UnderlayGraphics, Graphics), rect)
                    End If

                    Dim fill As Telerik.WinControls.Primitives.FillPrimitiveImpl = New Telerik.WinControls.Primitives.FillPrimitiveImpl(labelElement, Nothing)
                    fill.PaintFill(radGraphics, 0, System.Drawing.Size.Empty, rect)
                    Dim border As Telerik.WinControls.Primitives.BorderPrimitiveImpl = New Telerik.WinControls.Primitives.BorderPrimitiveImpl(labelElement, Nothing)
                    border.PaintBorder(radGraphics, 0, System.Drawing.Size.Empty, rect)

                    Using brush As Brush = New SolidBrush(labelElement.ForeColor)
                        Dim drawRectangle As RectangleF = New RectangleF()
                        drawRectangle.X = rect.X + labelElement.Padding.Left
                        drawRectangle.Y = rect.Y + labelElement.Padding.Top
                        drawRectangle.Width = rect.Width - labelElement.Padding.Right
                        drawRectangle.Height = rect.Height - labelElement.Padding.Bottom
                        Dim format As StringFormat = New StringFormat()
                        format.Alignment = ContentAlignmentToHorizontalStringAlignment(labelElement.TextAlignment)
                        format.LineAlignment = Me.ContentAlignmentToVerticalStringAlignment(labelElement.TextAlignment)
                        graphics.DrawString(labelElement.Text, labelElement.Font, brush, drawRectangle, format)
                    End Using

                    If angle <> 0 Then
                        radGraphics.ResetTransform()
                        radGraphics.RestoreState(state)
                    End If

                    graphics.ResetClip()
                Next
            Next
        End Sub

        Public Function ContentAlignmentToVerticalStringAlignment(ByVal contentAlignment As ContentAlignment) As StringAlignment
            Dim result As StringAlignment

            Select Case contentAlignment
                Case contentAlignment.BottomCenter, contentAlignment.BottomLeft, contentAlignment.BottomRight
                    result = StringAlignment.Far
                Case contentAlignment.TopCenter, contentAlignment.TopLeft, contentAlignment.TopRight
                    result = StringAlignment.Near
                Case Else
                    result = StringAlignment.Center
            End Select

            Return result
        End Function

        Private Function ContentAlignmentToHorizontalStringAlignment(ByVal contentAlignment As ContentAlignment) As StringAlignment
            Dim result As StringAlignment

            Select Case contentAlignment
                Case contentAlignment.BottomLeft, contentAlignment.MiddleLeft, contentAlignment.TopLeft
                    result = StringAlignment.Near
                Case contentAlignment.BottomRight, contentAlignment.MiddleRight, contentAlignment.TopRight
                    result = StringAlignment.Far
                Case Else
                    result = StringAlignment.Center
            End Select

            Return result
        End Function

    End Class

    Private Sub RadChartView1_CreateRenderer(sender As Object, e As ChartViewCreateRendererEventArgs)
        e.Renderer = New CustomCartesianRenderer(e.Area)
    End Sub

    Public Class CustomCartesianRenderer
        Inherits CartesianRenderer
        Public Sub New(area As CartesianArea)
            MyBase.New(area)
        End Sub
        Protected Overrides Sub Initialize()
            MyBase.Initialize()
            For i As Integer = 0 To Me.DrawParts.Count - 1

                Dim label As BarLabelElementDrawPart = TryCast(Me.DrawParts(i), BarLabelElementDrawPart)
                If (label IsNot Nothing) Then
                    Me.DrawParts(i) = New CustomLabelElementDrawPart(label.Element, Me)
                End If
            Next
        End Sub
    End Class

Why exists the Crosshair feature only for the WPF version of the RadChartView and not for the WinForms implementation?

Is there a plan to release that feature for WinForms too?

Thx in advance
Uli

Currently, ScatterSeries are able to use NumericAxes only. A good improvement will be to allow using DateTimeContinuousAxes as well.

Add null value support for RadChartView

Some other charting frameworks support ‘dynamic’ graphs/diagrams, where the graph shows nodes and links, and the user can drag the nodes around the page, and the other nodes are pulled around it. This is a great way to visualise and explore this kind of node+link data. Its also a great way to sell and app, as it looks cool.

Hi Team,

Can you please share sample or demo code for candlestick graph (C# winform).

Thanks

I have use following code to use Both Scrollbar in RadChartView While Zoom.
but it not scroll my chart .

radchart1.HorizontalScroll.Enabled = true;
radchart1.HorizontalScroll.Visible = true;
radchart1.VerticalScroll.Enabled = true;
radchart1.VerticalScroll.Visible = true;
Please help me.

Hello Kalpesh,

Currently panning in RadChartView cannot be performed using the scrollbars. We have a feature request logged here: https://feedback.telerik.com/Project/154/Feedback/Details/111013-add-radchartview-add-a-scrollbar-that-controls-the-pan-and-zoom

Please subscribe to the item so that you be updated when its status changes. For the time being I can suggest using a RadRangeSelector control to zoom and pan the chart. More information is available here: https://docs.telerik.com/devtools/winforms/rangeselector/overview

Regards,
Hristo

Having issues withVS2013 & 2015 Q1 Winforms RadChartView control

1. WYSIWYG in design time does not refresh properly after changing axis collection parameters, unless close and reopen the parent winform or custom control
2. by changing an axis collection parameter , seem to end up with multiple extra axes series (originally had axisX, AxisY, and after a minor param change ended up with axis 0 thru 5 (6 in total) and all series where now using axis4 & axis5 not my original axis?
3. I can't see to toggle display on/off of series in winforms via the legend, yet in wpf web it is possible? will this feature be added later?

attached is example of WYSIWYG not working

improvement Suggestions:
I would love to have a major and minor grid (similar to ref: http://thumbs.dreamstime.com/z/screen-digital-oscilloscope-two-types-signal-33269502.jpg)  as most of my work is measurement and scientific in nature. 

I would like to ensure the ratio of X-Y is fixed so that on resize of the control the grid does not skew or stretch  and I loose 1:1 aspect ratio

I look forward to your feedback ;)

when overlay a radlabel on a radchartview, chartview constantly refreshes
label backcolor set to transparent

tried to recreate this with a sample cs project but wouldn't reproduce!

video has two instances of the same user control on the form
notice that right hand instance does not update when radlabel is added

attached is video of it working fine, then add label ontop , then see it misbehaving  with fast refresh flicker!  not only that it also prevents other items in the user controls from updating and the other user control on the form from updating

have attached sample c# project (but cant reproduce)

To reproduce: use the following code snippet:

 Random rand = new Random();
 List<LineSeries> list = new List<LineSeries>();
 for (int i = 0; i < 15; i++)
 {
     LineSeries ls = new LineSeries();
     ls.LegendTitle = "Series" + i;
     list.Add(ls);
 }
 for (int i = 0; i < 1000; i++)
 {
     foreach (LineSeries s in list)
     {
         s.DataPoints.Add(new CategoricalDataPoint(i, rand.Next(0, rand.Next(5, 20))));
     }
 }
 radChartView1.Series.AddRange(list.ToArray());

 this.radChartView1.ChartElement.LegendPosition = LegendPosition.Bottom;
 this.radChartView1.ChartElement.LegendElement.StackElement.Orientation = Orientation.Horizontal;

Resolution: 
The issue is duplicated with item IMPROVE. RadChartView - ChartLegend should be able to wrap its items. From Q1 2015 when there are many items in the chart legend a scroll bar will appear so users can scroll through the items.
More info in the following feedback item http://feedback.telerik.com/Project/154/Feedback/Details/149848-add-radchartview-when-the-legend-has-many-items-a-scrollbar-should-appear

Currently the axis data flows from left to right starting with the smallest values and increasing. There should be a way to verse this flow and the most left values to be the biggest.

so that Y increases as you move down the screen. (Even) microsoft chart component supports this.