Declined
Last Updated: 17 May 2021 12:43 by ADMIN

I would like the possibility to change the color of a line depending on the value.

For example:

I have values between -1 to 10.

If the value is -1 I would like the color (or possible the opacity) to change until it goes back to 0 or above.

Declined
Last Updated: 26 Sep 2019 13:19 by ADMIN
You can observe the difference between the ChartView and an Excel Chart with the same data in the attached pictures.
Declined
Last Updated: 29 Jan 2019 12:47 by Maciej
Currently, the control relies on its IsLoaded property to determine if it should render its items (axes, data points, annotations, etc.). However, if you measure and arrange the control in code without adding it into the visual tree, the IsLoaded property is not set to True, therefore the chart is not rendered and the image gets empty.

Original description
----------------------------------

Title: RadCartesianChart incorrecly rendered

We're rendering (Telerik) charts in code behind, to include them in a dynamic documentation.

For most controls it works fine - using standard methods (rendering control with System.Windows.Media.Imaging.RenderTargetBitmap and saving the result BitmapSource to disk)

However, it's impossible with RadCartesianChart with CategoricalSeriesDescriptor or ChartSeriesDescriptor. What we are able to get are axes and descriptions, but not bars.

I'm attaching an example - MainWindow displays a chart. I try to also create the chart in code behind. 
In CreateAndSaveChart() method I create a chart with a DataContext, then I call Measure and Arrange methods on it. At this stage the control should be properly initialized and ready to render. (For simplicity I omit rendering control with RenderTargetBitmap - you can preview the control with WPF Tree Visualizer, which will give you the same result). Well, if you preview the control at this stage, you'll see that the chart is missing bars. 
Next I create a new Window with my chart as a content, and display it for a while. Now the chart is fully and correctly rendered. As a workaround we display some Telerik chart in a transparent window to fully render, but such a workaround was reported not to work for some clients and is unacceptable in a long run. With most of Telerik charts we don't have such problems.

Other issue:
- for other Telerik charts we need to wait a few seconds to have it fully rendered. It's be better to have an event informing that the control is ready. 

I'll be happy to add more details if you need any.

* While experimenting with the example I've suddenly managed to render the chart with bars, but this time the rendered size was incorrect (very small)
Declined
Last Updated: 08 Oct 2018 07:12 by ADMIN
Created by: tree28
Comments: 2
Category: ChartView
Type: Feature Request
2
Please add a feature for justifying the bar series chart so that bar data points can be plotted with a "Left", "Right", or "Center" justification to chart ticks.

An image to describe a "Right" vs "Center" bar justification is provided.
Declined
Last Updated: 04 Jul 2018 10:21 by ADMIN
      How can I hide the point in the lineSeries with the large data,and then zoom in by mousewheel,the point can be show in the lineSeries,when zoom out again,the point can be hide.
     Because with large data in a view,if show the point, the lineSeries's performance is poor,and the details area is not necessary,only when zoom in,we hope to show the point.
Declined
Last Updated: 29 Oct 2020 15:46 by ADMIN
An InvalidCastException is thrown in the Fill/Background property binding in the series' DefaultVisualStyle when the RenderOptions is set to Bitmap or Direct2D.
Declined
Last Updated: 11 Oct 2016 08:42 by ADMIN
Created by: Marcello
Comments: 5
Category: ChartView
Type: Feature Request
2
Hi,

I worked with a lot of chart components for Wpf. I think Telerik offer the best charts architecture that allow to obtain great results in every scenario.

After years of use, I think is possible to  improve more the global architecture.

1) Series Dataset

Charts now works with Points. I think that a better solution require a more abstract structure as a virtual "Dataset".
A dataset reuire a type [conform to X axis], tipically X can be a double, a datetime, a label.
Dataset return info about poits, tipically:
- Min X
- Max X
Dataset return a DataContext that allow to draw chart:
- GetCloserX to an X value [Trackball/Lables...]
- GetPoints from/to [Pan/Zoom]

This approach is really more efficent and powerfull. In example you can simply define a Dataset as a Formula:

Dataset "CosX" based on doubles.
MinX=-inf
Maxx=+inf
GetDataContext from/to -> Return allways 100 points x, cos(x).

So you can obtain:

- Ultraefficient series using GetDataContext algorithms for specific cases, in example, ordered data.
- Trend lines using "Formula" series

2) Only one series, with subtypes.

It is really annoying change series type.
I think a chart must contains a series and this series can show Line, Area, Split Line, Markers, Columns...

To write a good "option panel" that allow user to set Line Thickness, Line Split or standard, Area opacity, Area Color, Marker Type, Marker Colors, Columns Borders... require today a giant work and elaborate code that add and remove serie, reassign points, set z-index, remove and add series in legend... with an incredible useless works in points.

3) More accurate axes definition.

Now Chart and Series expose Horizontal and Vertical Axis property.
I think this is terrible properties :-).

"Horizontal" and "Vertical" is depending chart orientation. Furthermore now, first X/Y axis must be set in chart, others in series. Moving series from an axis to another is really annoying: if new axis is first you must set is null else you must set it...

I think Chart must expose XAxesCollection and YAxesCollection. This collections must contains all X and Y axes.
Series [and annotation and every object that uses axes] must expose XAxis and YAxis as the Axis object or Axis index.

4) Chart orientation

Today a simple chart rotation require a lot of code. The developer must be invert Horizontal and vertical axes, change axes in series and annotations, zoom/pan stop to work...
When this is combined with point 2) problems the result is an nightmare.

I understand this require a big work and a lot of compatibility problems [Telerik already exposes two charts versions, three is probably a little bit confused].

But if Telerik obtains this features I think it become the most unattainable charts component producer of the world.

Decline reason: Most suggestions were tried in the old RadChart and they weren't working very well.
Declined
Last Updated: 14 Nov 2014 17:52 by ADMIN
Created by: Louis
Comments: 2
Category: ChartView
Type: Feature Request
1
It would be very useful if Charts would support multiple SeriesProviders to be able to plot data of different types without having to artificially consolidate them into a single list with the charting attirbutes exposed via the same properties.
Declined
Last Updated: 27 Jul 2016 16:00 by Louis
XAML Team recently reviewed this request and decided not to address it in the future since the Smart Labels functionality was introduced in Q1 2014.
Declined
Last Updated: 26 Jul 2016 08:43 by Petar
Provide a way to synchronize Trackball and Crosshair behaviors.

XAML Team reviewed this request and decided not to address it in the future. 
Declined
Last Updated: 09 Mar 2023 13:14 by ADMIN
Created by: Petar
Comments: 0
Category: ChartView
Type: Feature Request
4

Implement a new LabelFitMode that prevents the axes labels from overlapping by increasing the LabelInteval.

Declined: This is no longer necessary after introducing the SmartLabelsMode.

Declined
Last Updated: 26 Jul 2016 08:44 by Petar
Introduce DesiredTickCount property for the DateTimeContinuousAxis.

XAML Team reviewed this request and decided to not address it in the future.

We introduced the ability for the axis to change step based on its size, so that labels do not overlap and presently we see no value in having such a DesiredTickCount property (whats even more the axis already has a MaximumTicks property).
Declined
Last Updated: 24 Nov 2014 14:27 by ADMIN
RadPieChart labels are clipped when RadiusFactor is 1.0
Declined
Last Updated: 26 Jul 2016 08:50 by ADMIN
Currently when sampling is used to generate the data points, the DataItem property of the DataPoint is null and there is no way to find out which data items have been used to generate the data point. A new property can be introduced (DataItems) which can contain the data items in mind.

Decline reason: This item is duplicate of the following one:
http://feedback.telerik.com/Project/143/Feedback/Details/113364-chartview-expose-the-data-items-when-sampling-is-used
Declined
Last Updated: 26 Jul 2016 10:08 by Lisitsa
Add support for tooltip visualization over the continuous series segments that would interpolate the actual value between data points.

XAML Team reviewed this request and decided not to address it in the future. Appropriate way to get this is to use the crosshair behavior.
Declined
Last Updated: 26 Jul 2016 10:11 by ADMIN
Add support for tooltip visualization over the continuous series segments (besides the current support for visualizing the tooltip over the actual data point / point mark).

Declined due to duplication with http://feedback.telerik.com/Project/143/Feedback/Details/113405-chartview-enhanced-tooltip-support-for-continuous-series-segments-line-area-e
Declined
Last Updated: 26 Jul 2016 10:40 by MikeWiese
ADMIN
Created by: Telerik Admin
Comments: 1
Category: ChartView
Type: Feature Request
8
When SnapMode=TrackBallSnapMode.None the IntersectionPoints should be drawn not over DataPoints but over the real intersection between series and TrackBallLine (also the TrackBallControl should display the real calculated intersection value itself).

XAML Team reviewed this request and decided not to address it in the future.