Planned
Last Updated: 21 Feb 2024 11:15 by ADMIN
We can update our extensions to honor the ImplicitUsings settings set globally for new projects. For the item templates, we will need to also check the project settings.
Pending Review
Last Updated: 20 Feb 2024 12:07 by ADMIN
Scheduled for 2024 Q3 (7.08.2024)
When there is empty folder under "%appdata%\Telerik\Updates" the WinForms Upgrade wizard fails with

System.IO.FileNotFoundException: C:\Users\mstefanov\AppData\Roaming\Telerik\Updates\Telerik_UI_For_WinForms_2022_3_1109_Dev_dlls\BinNetCore\Telerik.WinControls.dll
at System.Diagnostics.FileVersionInfo.GetVersionInfo(String fileName)
at Telerik.VSX.Internal.FileSystem.FileVersionInfoWrap.get_FileVersion()
at Telerik.WinControls.VSX.AssemblyDiscovery.WFCoreFileBasedDistributionSearcher.CheckFolderContainsDistribution(String folderPath)
at Telerik.VSX.DistributionListing.DistributionDiscovery.FileBasedDistributionSearcher.GetPackageDistributions(String packageFolder, Func2 fileBasedDistributionTokenCreator) at Telerik.VSX.DistributionListing.DistributionDiscovery.DistributionSearcher.PopulateFileBasedDistributions(IList1 distributions, IList1 foldersToSearch, Func2 distributionTokenCreator)
at Telerik.VSX.DistributionListing.DistributionDiscovery.DistributionSearcher.GetDistributions()
at Telerik.WinControls.VSX.WFDistributionSearcher.GetDistributions()
at Telerik.VSX.ViewModels.DistributionChooserViewModelBase1.get_AllDistributions() at Telerik.WinControls.VSX.Wizards.ViewModels.WFDistributionChooserUpgradeViewModel.GetDistributions() at Telerik.VSX.ViewModels.DistributionChooserViewModelBase1.get_Distributions()
at Telerik.VSX.ViewModels.DistributionChooserViewModelBase1.get_CurrentDistribution() at Telerik.WinControls.VSX.Wizards.UpgradeProjectWizardBase2.TryGetDistributionToken(Version targetFramework)
at Telerik.WinControls.VSX.Wizards.UpgradeProjectWizardBase`2.TryGetMainLoadInformation(Version targetFramework)
at Telerik.VSX.WizardEngine.Controls.WizardControlBase.PopulateCollectedValues(IPropertyDataDictionary gatheredData)
at Telerik.VSX.WizardFramework.Pages.DynamicPageController.GetData()
at Telerik.WizardFramework.Wizard.GetCurrentPageData()
at Telerik.WizardFramework.Wizard.UpdateNavigation()
at Telerik.WizardEngine.Helpers.EventHelper.CatchExceptionAndSendReport(Action action)
Planned
Last Updated: 19 Feb 2024 09:38 by ADMIN
Scheduled for 2024 Q2 (15.05.2024)

When Telerik UI for WinForms / WPF extensions are installed, Visual Studio is unresponsive for a couple of minutes after a solution is loaded. During that time, "Updating source control status…" is shown.

Workarounds:

  • Disable Telerik UI for WinForms / WPF extensions.
  • Checkout the solution file.
Declined
Last Updated: 16 Feb 2024 19:48 by ADMIN
Created by: MrBizzl
Comments: 8
Category: Installer and VS Extensions
Type: Bug Report
2

Dear Ladies and Gentlemen

Currently I am trying in vain to upgrade to the latest version Telerik UI for WinForms 2022.1.118.
However, the update fails with the error given below.

I have already uninstalled and reinstalled VS2019. Unfortunately this did not help.

Can you help?

Best Timo

Completed
Last Updated: 16 Feb 2024 11:48 by ADMIN

Currently, after installing Visual Studio 2022 and Telerik UI for WinForms suite on a Windows 11 Arm I cannot see any extension installed on Extension menu:

Unplanned
Last Updated: 06 Nov 2023 14:47 by ADMIN
Scheduled for 2024 R1 - PI 1 (15.11.2023) SP1
Created by: Massimo
Comments: 1
Category: Installer and VS Extensions
Type: Bug Report
1
Telerik VS extensions may cause performance issues that impact both the responsiveness and the overall performance of Visual Studio.

Planned
Last Updated: 03 Oct 2023 12:00 by ADMIN
Scheduled for 2024 R1 - PI 1 (08.11.2023) SP1
Created by: James
Comments: 2
Category: Installer and VS Extensions
Type: Bug Report
0

Steps:

 

 

Completed
Last Updated: 21 Sep 2023 12:23 by ADMIN
Release 2023 R3 - PI 1 (19.07.2023) SP1
Created by: Curtis
Comments: 1
Category: Installer and VS Extensions
Type: Bug Report
0

Currently, adding a standard MS Form also shows the .vb extension. However, adding a RadForm shows only the name which may lead to incorrect name of the form as it is demonstrated in the attached gif file:

Unplanned
Last Updated: 07 Jul 2023 09:09 by ADMIN

VS 2022 17.5.1 successfully converts a blank WinForms project without any Telerik control in it.

VS 2022 17.6.2  hangs:

Unplanned
Last Updated: 06 Dec 2021 13:22 by ADMIN
Created by: David
Comments: 1
Category: Installer and VS Extensions
Type: Bug Report
0

When you want to do the Upgrade Wizard, the following error appears: Failed to execute command. System.IO.DirectoryNotFoundException: Could not find a part of the path 'c: \ users \ quinteju \ appdata \ local \ microsoft \ visualstudio \ 16.0_c92db9cd \ extensions \ pfzn5mj3.wxk \ ProjectManagement \ Upgrade \ ScenarioDefinition.xml'. at System.IO .__ Error.WinIOError (Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init (String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHostPath) at System.IO.FileStream..ctor (String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize) at System.Xml.XmlDownloadManager.GetStream (Uri uri, ICredentials credentials, IWebProxy proxy, RequestCachePolicy cachePolicy) at System.Xml.XmlUrlResolver.GetEntity (Uri absoluteUri, String role, Type ofObjectToReturn) at System.Xml.XmlTextReaderImpl.OpenUrlDelegate (Object xmlResolver) at System.Threading.CompressedStack.runTryCode (Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup (TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.CompressedStack.Run (CompressedStack compressedStack, ContextCallback callback, Object state) at System.Xml.XmlTextReaderImpl.OpenUrl () at System.Xml.XmlTextReaderImpl.Read () at System.Xml.XmlLoader.Load (XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load (XmlReader reader) at System.Xml.XmlDocument.Load (String filename) at Telerik.VSX.WizardEngine.Configuration.ScenarioDefinition.Deserialize (String fileName) at Telerik.VSX.ProjectConfiguration.ProjectConfigurationTypeSelectorBase.GetScenario (ProjectManagementScenarioPath path) at Telerik.WinControls.VSX.ProjectConfigurators.ProjectConfigurationTypeSelector.ProjectUpgrade (IPropertyDataDictionary additionalPreWizardData) at Telerik.WinControls.VSX.ProjectConfigurators.StreamlinedProjectConfiguration.StartUpgradeWizard () at Telerik.WinControls.VSPackage.CommandExecutor.Execute (UInt32 commandId) at Telerik.VSX.VSPackage.PackageBase.CommandCallback (Object sender, EventArgs e) 

 

I already reinstalled three times and it doesn't work in any way.  :(

 

Planned
Last Updated: 12 Nov 2021 14:47 by ADMIN
Created by: Monique
Comments: 1
Category: Installer and VS Extensions
Type: Bug Report
0

Below is the error.  I had removed all the references and was trying to add them back through the configure project extension vs 2019 and vs 2022 threw the same error. 

 

An error occurred while running the wizard.

Error executing custom action Telerik.WinControls.VSX.Actions.UpdateReferencesAction: System.Runtime.InteropServices.COMException (0x80004005): This reference cannot be removed from the project because it is always referenced by the compiler.
   at VSLangProj.Reference.Remove()
   at Telerik.VSX.Internal.ProjectManagement.ApplicationProjectAssemblyReference.RemoveReference()
   at Telerik.VSX.ProjectConfigurators.ApplicationReferenceManager.RemoveReferences()
   at Telerik.VSX.ProjectConfigurators.ApplicationReferenceManager.UpdateReferences()
   at Telerik.VSX.Actions.UpdateReferencesAction.UpdateReferences(IProjectWrapUIComponents projectWrap)
   at Telerik.VSX.Actions.UpdateReferencesAction.Execute(WizardContext wizardContext, IPropertyDataDictionary arguments, IProjectWrap project)
   at Telerik.VSX.Actions.ProjectActionBase.Execute(WizardContext wizardContext, IPropertyDataDictionary arguments)
   at Telerik.VSX.WizardEngine.Actions.ActionBase.Telerik.WizardFramework.IAction.Execute(IWizardContext wizardContext, IPropertyDataDictionary arguments)
   at Telerik.VSX.WizardEngine.ActionManager.ExecActions()

 

 

Declined
Last Updated: 22 Sep 2021 14:54 by ADMIN
Created by: Brian
Comments: 3
Category: Installer and VS Extensions
Type: Feature Request
1
Stop Expanding ALL the Telerik Toolbox control groups when Visual Studio 2017 loads a project! YES, we know your there! We PUT you there.. If we need you, we know where you are! Please quit over-convoluting the toolbox menu by obnoxiously expanding all your toolbox control groups!
Unplanned
Last Updated: 26 May 2021 11:45 by ADMIN

Steps to reproduce:

  1. Install R1 2021 SP1 (2021.1.204)
  2. Create a Telerik WinForms project and drag a RadTostNotificationManager from the Toolbox and drop it onto the form. The following two references are required for using RadToastNotification:

    The important information here is the version of the Microsoft.Toolkit.Uwp.Notifications: 6.1.0.0

  3. Run the Upgrade Wizard and upgrade to R2 2021 (2021.2.511):

After the upgrade process is successfully completed, you can see that the Toolbox version is successfully updated as well as the Telerik references in the project:

However, the version of the Microsoft.Toolkit.Uwp.Notifications still remains 6.1.0.0 even though in the installation folder we distribute the updated version 7.0.0.0:

Then, if you try to build the project, you will see the following error message:


Workaround: Remove the existing Microsoft.Toolkit.Uwp.Notifications assembly and add it anew using the references from the installation folder: C:\Program Files (x86)\Progress\Telerik UI for WinForms R2 2021\Bin40 It is expected to be the correct version 7.0.0.0.  

 

 

Completed
Last Updated: 23 Oct 2020 08:45 by ADMIN
Created by: Daniel
Comments: 2
Category: Installer and VS Extensions
Type: Bug Report
1

Hello,

 

I am using my own nuget server to deploy the Telerik Packages.

So I downloaded the file"Telerik_UI_For_WinForms_2020_3_915_Nuget_Dev.zip"

Unfortunately, the contained file "UI.for.WinForms.GridView.2020.3.915.nupkg" is broken:

For any reason, in the subfolder "lib\net40\" there are three different TelerikData.dll and TelerikData.XML files. When importing in our Nuget server, this leads to an error

Error: An exception occurred while rebuilding the package store: System.ArgumentException: Das Element wurde bereits hinzugefügt. Schlüssel im Wörterbuch: "lib/net40/TelerikData.dll". Hinzuzufügender Schlüssel: "lib/net40/TelerikData.dll".

Could you please fix your build-and-deploy process and re-upload the package?

 

Best regards

Daniel Petat

Planned
Last Updated: 12 Oct 2020 11:34 by ADMIN
Created by: kultman
Comments: 1
Category: Installer and VS Extensions
Type: Bug Report
0
I upgraded to latest version of Win UI controls, and opened a project for an Outlook COM Addin. There has been no problems upgrading Telerik controls in that project until now. It's a Class Library project with Telerik forms in it. Now I have to change project type to Windows Forms, upgrade Telerik and then back to Class Library. Silly really... :)
Completed
Last Updated: 19 Feb 2020 11:33 by ADMIN
Release R1 2020 SP1
Created by: Solomon
Comments: 3
Category: Installer and VS Extensions
Type: Feature Request
1

It appears that RadControlSpy.dll isn't packaged with any of the Telerik.UI.for.WinForms NuGet packages and isn't available as a standalone package.

This request is to make the DLL available as a standalone NuGet package available on the Telerik NuGet server.

Completed
Last Updated: 17 Feb 2020 09:15 by ADMIN
Release R1 2020 SP1

Theme Names aren't sorted in the Properties window of VS2019


Completed
Last Updated: 16 May 2019 06:00 by ADMIN

hi,

when upgrading from telerik winforms r3 sp1 2018 to r1 2019 using vb.net 2012 i received an error

what is we have to do

regards

Declined
Last Updated: 16 Apr 2018 10:47 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Principal
Comments: 1
Category: Installer and VS Extensions
Type: Bug Report
1
To reproduce: please refer to the attached sample video

1. Uninstall the already existing version of the Telerik UI for WinForms suite. Ensure that you don't have any installation and the Telerik menu is not visible in Visual Studio.
2. Open Visual Studio >> Tools >> Extensions and Update and search for Telerik WinForms VSExtensions. Install it.
3. After restarting Visual Studio, create a new Telerik project. You may be prompt to download the latest version during the creation process. 
4. Run the Toolbox configurator in order to obtain the proper version in the toolbox.
5. After the project is created, open the form's designer and drag a Telerik control from the toolbox and drop it onto the form. Open the Designer.cs and you will notice that control's declaration is inside the InitializeComponent method, not outside as expected.

The issue is not reproducible each time you follow the steps. It was reproduced with Visual Stidio 2012 on Windows 10. 

Workaround:

Download the Telerik UI for WinForms msi from your account and install the suite.
Unplanned
Last Updated: 15 Aug 2017 13:58 by Christine
Created by: Christine
Comments: 5
Category: Installer and VS Extensions
Type: Feature Request
0
I see no use for the templates that are currently provided. I'm never going to build a new Word or Outlook type application. Some templates that might be useful would be along the lines of structure for business apps. Something that would give a framework for building apps for business use.
1 2