FIX. RadPageView - newly added page should be automatically selected in the properties window in design time
Comment: When the above is implemented and a new page is added the following happens:
1. The RadPageView smart tag menu is closed
2. The new page is selected (the new page is a different component)
3. The smart tag menu of the new page is opened.
This actually breaks the user experince instead of making it better.

FIX. RadPageView the isContentVisible property should work in all modes.

RESOLUTION: This property should work only in ExplorerBar mode by design.

I have a form which contains TreeView control. I need to convert it to RadTreeView. So I replaced TreeView control with RadTreeView and TreeNode with RadTreeNode in the code. I found that the events in both are different, so tried to replace the events with similar events in RadTree.

Following are the events that I have replaced in my code :

1.  

        Private Sub TreeView1_AfterExpand(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewEventArgs) Handles tvMain.AfterExpand

Replaced by -

        Private Sub TreeView1_AfterExpand(ByVal sender As Object, ByVal e As Telerik.WinControls.UI.RadTreeViewEventArgs) Handles tvMain.NodeExpandedChanged   

2.

            Private Sub TreeView1_AfterCollapse(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeViewEventArgs) Handles tvMain.AfterCollapse

  Replaced by -  

            Private Sub TreeView1_AfterCollapse(ByVal sender As Object, ByVal e As Telerik.WinControls.UI.RadTreeViewEventArgs) Handles tvMain.NodeExpandedChanged

and included Expanded flag to check if it is expand or collapse.

Here, I noticed unwanted firing of this replaced event when compared to the old event, but I handled it using the Expanded flag.

3.

        Private Sub tvMain_AfterSelect(ByVal sender As System.Object, ByVal e As System.Windows.Forms.TreeViewEventArgs) Handles tvMain.AfterSelect

Replaced by -

        Private Sub tvMain_AfterSelect(ByVal sender As System.Object, ByVal e As Telerik.WinControls.UI.RadTreeViewEventArgs) Handles tvMain.SelectedNodesChanged

This event gets fired twice while clicking on a node.

My main issues are,

• During the initial load of the form, the tree gets populated and at that time the select event (mentioned in point 3) fires automatically in my old project in which TreeView is used. But in the new project, during the load of the form the replaced event is not fired.
• Similarly, when I clicks a node , the replaced select event fires twice. After that I have a button in the same form which works like, when we click on a node and then click on the add button it will add a new node to the tree under the selected node. Now the functionality of the button doesnt work because, within the click function of add button, treeView1.selectedNode is 'Nothing'. Eventhough the select event is fired on clicking the node, the selectednode is 'Nothing' inside the click function of add button.

Hi Dess,

I have encountered some other issue here. text of the button is not displaying in this case.

I have set DrawText property as true, UseCompatibleTextRendering as true and TextImageRelation as true. still the text is not displaying only the image is showing. Could you please go thruogh the same project again

 

attaching the previous link https://feedback.telerik.com/winforms/1480197-event-not-firing-in-commandbar-button-in-radcommandbar-button

Thanks

Binshidha

CaptionTextFont property does not work. It should set the font of the OutLookStyle's caption and the font of the groups' headers.

Use attached to reproduce.

1. Select the ColorBox's ellipses to open the Color Dialog

2. Select the Web tab

3. Select Any colour in this Page

4. Select Transparent

Colour will update

5. Select the Professional tab

6. Select any colour

Colour won't update

7. Select any colour

Colour won't update

8. Select OK on Dialog

Colour will be transparent

Values will be same as selected in step 7

I am running the latest version of Telerik for Winforms. Once we click in the launch demo it is crashing. Another problem, I am not able to find the tssp files for the latest Visual Studio 2022 light and dark. Where are the files located? How can I download them?

Hi, all. I am using the example you guys provide in your website and you can get from here: https://www.telerik.com/blogs/winforms-scaling-at-large-dpi-settings-is-it-even-possible-#example

As you can see in the image, I open the form in my main screen with Scale 100%. I have a second screen running in 150%. When I grab the form near to the left edge side of it, it resizes in one way, what I believe that is the correct way. However, if you grab the form near to right edge side, near the minimize, maximize and close button, it resizes differently. We have several users using our application and we are not able to fix this scalling issue, even in your own example. Could you guys have a look at it and prioritize? This kind of issue has been around for a long time without a final resolution. if not possible, let us know that we will have to decide move to another development tool.

Telerik version: 2024.2.514

Repro-steps

1. Create a RadGridView
2. Add a GridViewDecimalColumn
3. Add a GridViewSummaryRowItem with a GridViewSummaryItem which:
   1. calculates the average of the values in the decimal column
   2. formats the value to two decimals after the decimal point: {0:0.00}
4. Make an event handler for ViewCellFormatting.
5. Add some rows with values to the grid.
6. In the event handler, try to read ((GridSummaryCellElement)e.CellElement).Value.

Actual behavior

The value contains a string representing the formatted and rounded value of the average of all values.

Expected behavior

The value contains a raw, not rounded,  not formatted, decimal value. 

Remarks

I expect this behavior since GridSummaryCellElement has two properties: Text and Value.
I expect those to have difference functions. Value to hold the actual calculated value, and Text to hold the formatted, round string-equivalent.

Another reason why I expect this, is that Value is of type object, not of type string. So expect a value corresponding to the original datatype of the column and/or the result of the calculation.

Follow-up questions

1. In what scenario may I expect in Value another data type that string?
2. How, during the event handler, can I retrieve the original calculated value (with using parsing, since that is slow and does not contain all the digits).

 

Steps to reproduce:
1. Paste image in the editor
2. Press enter (the image is pasted again everytime Enter is pressed)

This is not issue in the control. It is cased by the test application. The focus remains on the paste button and for this reason the image is pasted when enter is pressed.

- the initial object property value is not displayed
- the color change is not always reflected, even though the object implements INotifyPropertyChanged

Adding the binding in code works correctly.

To reproduce: 
1. Drag and drop RadPageView on the form
2. Add 2-3 pages 
3. Set the ViewType to Backstage
4. Open smart tag and press Delete key to edit the Item Area Width property. 
After pressing the key, the RadPageView is removed from form.  

The issue is observed in Visual Studio 2015 only. 

You can use the following code snippet and follow the steps from the provided gif file:

        public RadForm1()
        {
            InitializeComponent();

            DataTable dt = new DataTable();
            dt.Columns.Add("Id");
            for (int i = 0; i < 100; i++)
            {
                dt.Rows.Add(i);
            }

            this.radMultiColumnComboBox1.DisplayMember = "Id";
            this.radMultiColumnComboBox1.ValueMember = "Id";
            this.radMultiColumnComboBox1.DataSource = dt;
            this.radMultiColumnComboBox1.SelectedIndex = -1;

            this.radMultiColumnComboBox1.SelectedIndexChanged += radMultiColumnComboBox1_SelectedIndexChanged;
        }

        private void radMultiColumnComboBox1_SelectedIndexChanged(object sender, EventArgs e)
        {
            RadMessageBox.Show("You just selected index " + this.radMultiColumnComboBox1.SelectedIndex);
        }

Hi All,

Note:- I am using Bound RadTreeview. Bound with DataSource.

1 Take RadTreeview

2 Add Few nodes Like:

    ......Node A

    ......Node B

    ......Node C

    ............Node D

    ............Node E

3 Now Drag Node B and Drop it in Node C (As Node C's Child)

4 It throw Exception Error Msg  "Collection was modified; enumeration operation may not execute."

5  Now Try to Drag Node E and Drop it in Node B, again same error occurs

6 Full error screen i attached here.

Please reply as soon as possible.

 

Hello,

I have already used your ItemFormatting event in my code and implemented it the same way you have provided.

In my code, i have created 7-8 messages and fixed the first msg's timestamp to "6/6/2019 11:53:08 AM" and the remaining messages with timestamp of 2 minutes more than this time. Whenever the event is triggered i wrote a code which compares the timestamp of my message with this timestamp "6/6/2019 11:53:08 AM". Conditionally only the first message falls in this condition and i paint it red, which works well for first time (On load) and then when i scroll my chat, the event unnecessarily paints the remaining msgs too, which should not happen.

I am attaching my .cs file with designer please refer to it, and resolve this asap. Looking forward to your response.

Thanks.

Hello Guys,

 

Good Evening , As per your suggestions i make my custom treeview node with LiteVisualElements .

In That Node i have taken one StackLayoutElement and RoundRectShape assigned to it but still panel shows corners instead of round edges,

i tried with different properties and styles but not get succeed , so please help me out.

here i have attached image of my node and "stackLayoutElement" code too.

spnlControls = new StackLayoutElement();
            spnlControls.Orientation = Orientation.Horizontal;
            spnlControls.NotifyParentOnMouseInput = true;
            spnlControls.DrawFill = true;
            spnlControls.DrawBorder = true;
            spnlControls.Shape = new RoundRectShape(4);
            spnlControls.BackColor = Color.Transparent;
            spnlControls.BackColor2 = Color.Transparent;
            spnlControls.BackColor3 = Color.Transparent;
            spnlControls.BackColor4 = Color.Transparent;
            spnlControls.BorderGradientStyle = GradientStyles.Solid;

https://feedback.telerik.com/winforms/1372559-add-radautocompletebox-mode-disabling-the-selection-of-already-selected-items?_ga=2.157346746.1205807184.1576647468-1851167977.1571202604

I have tried this code. It removes the item from list if we enter a letter first, then key down. But if we select an item then just press key down same item will be shown in the list.

 

Hi there,

 

We have recently found a bug on both the RadDocument and Rad Rich Text Editor. Created a RTF document via the RadRichText Editor. The RTF document contains a table. When the document is saved and loaded from the same form, it is displaying correctly, however when loaded from a different form, it seems to have shrunk and lost the column width, thus having long and skinny columns.

We have set the fixed column width on the table, however this did not seem to solve the issue.

I have attached two screenshots for reference. One with the correct looking table, and one with the long and skinny columns.

Is there a workaround, or is this a known bug?

 

Correct table:

 

 

Long and skinny columns:

 

Currently on Telerik Winforms version 2018.3.1016.40

 

Kind regards,

Paul