In some languages such as German and Swedish, combining correct words into one is a common morphological pattern. Compound words not included in the dictionaries should not be marked as misspelled.

Provide mechanism for selecting an uri from which a dictionary can be downloaded when needed. In this way the client will download only the dictionaries that are in use. If more are needed, they will be downloaded on demand.

Implement import of bullets and numbering which use the old Word 6.0/Word 95 format from RTF. This includes, but is not limited to, the following RTF tags: \pnlvlN, \pnlvlblt, \pnlvlbody, \pnlvlcont. See RTF specification, "Word 6.0 and Word 95 RTF" heading for full description.

WordPad and some legacy systems export lists with this formatting, so the construction is relatively widespread.

According to the specification, if RTF reader doesn't support specific bullets/numbering tags, it can use the \pntext tag to read the bullets/numbering as plain text; but currently RadRichTextBox always ignores the \pntext tag. Because of this, the bullets or numbers of lists in the old format are missing after import.

After further discussion within the XAML team and more research, we decided that introducing a similar property does not align with the current idea and model of RadRichTextBox. Thus, we are declining this item.

When text is using fonts with defined ligatures (e.g. Calibri, Gabriola, etc.) and contains character groups with defined ligature for it, the text width is measured incorrectly (shorter that it should be). As caret and selection navigates on positions computed by this measuring system, they are not synchronized with what is shown in the UI (which correctly respects the ligatures), and there is slight offset from the real character positions and/or clipping of part of the letters at the end of the line.

Examples of such groups are (depending on the font) "tt", "ff", "ffi".

RadRichTextBox: Add import/export in the following formats: .mht .odt .epub .doc

Adding bookmarks with the same name programmatically always returns the first one in case use attempts to navigate to it using the Bookmarks dialog. 

Workaround: Remove the bookmark before adding a new one with the very same name.

Annotation Ranges where SkipPositionBefore is set to false on the AnnotationRangeEnd cause cursor jumps when deleting content to the right of the Annotation Range.

Steps to reproduce:
1. Open a job with Annotation Ranges where SkipPositionBefore is set to false on the AnnotationRangeEnd (I used the Document Protection sample in the demo app)
2. Move your cursor to the end of the range.
3. Hit the delete key
Expected: The cursor remains at the end of the AnnotationRange and content to the right is deleted.
Actual: Content to the right is deleted but eventually the cursor will jump to the right by one position and end up outside the Annotation Range.

In RadRichTextBox, when i export pdf in memorystream Footers are spread.

We have a legacy system that generates RTF using some native RTF controls. The RTF generated by this application is compatible with MS wordpad. But seems that the RadRichTextBox is not compatible. The problem is when we use bullets.

Consider we create an RTF with bullets, using legacy -

   * Legacy Bullet 1
   * Legacy Bullet 2
   * Legacy Bullet 3

Then, this is the RTF that is generated -

{\rtf1\fbidis\ansi\ansicpg1252\deff0{\fonttbl{\f0\fnil\fcharset0 Segoe UI;}{\f1\fnil\fcharset0 Arial;}{\f2\fnil\fcharset2 Symbol;}}

{\colortbl ;\red0\green0\blue0;}
\viewkind4\uc1\pard\ltrpar\cf1\lang1033\f0\fs22\par
\pard{\pntext\f2\'B7\tab}{\*\pn\pnlvlblt\pnf2\pnindent0{\pntxtb\'B7}}\ltrpar\fi-200\li200\tx360 Legacy Bullet 1\par
\pard{\pntext\f2\'B7\tab}{\*\pn\pnlvlblt\pnf2\pnindent0{\pntxtb\'B7}}\ltrpar\fi-200\li200\tx360\tx360 Legacy Bullet 2\par
\pard{\pntext\f2\'B7\tab}{\*\pn\pnlvlblt\pnf2\pnindent0{\pntxtb\'B7}}\ltrpar\fi-200\li200\tx360\tx360\tx360 Legacy Bullet 3\par
\pard\ltrpar\tx360\tx360\tx360\par
\f1\par
}
----------------------------------------------------------------------

Now, if we open this RTF in Wordpad, then the bullets are displayed correctly.

But the bullets are not displayed when we bind the RTF to RadRichTextBox.

It displays something like this -

Legacy Bullet 1
Legacy Bullet 2
Legacy Bullet 3

And after binding the original RTF, if we now try to get the RTF this is how it looks like - 

{\rtf\ansi\ansicpg1252\uc1\deff0\deflang1033{\fonttbl{\f0 Verdana;}{\f1 Segoe UI;}{\f2 Arial;}}{\colortbl\red0\green0\blue0 ;;}{\*\defchp\ltrch\f0\fs24\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone}{\*\defpap\sl276\slmult1\sa180}{\stylesheet{\s0\sqformat\spriority0\ltrch\f0\fs24\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\sl276\slmult1 Normal;}{\*\ts2\tsrowd\spriority59\trbrdrt\brdrnone\trbrdrb\brdrnone\trbrdrl\brdrnone\trbrdrr\brdrnone\trbrdrh\brdrnone\trbrdrv\brdrnone\trgaph0\clpadft3\clpadt0\clpadfr3\clpadr0\clpadfl3\clpadl0\clpadfb3\clpadb0\tsvertalt\ltrch\f0\fs24\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\sl276\slmult1 Table Normal;}}\nouicompat\viewkind4\paperw12240\paperh15840\margl1425\margr1425\margt1425\margb1425\deftab720\sectd\pgwsxn12240\pghsxn15840\marglsxn1425\margrsxn1425\margtsxn1425\margbsxn1425\headery720\footery720\pard\s0\ltrpar\sl240\slmult1{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\par}\pard\s0\ltrpar\tx360\sl240\slmult1\li200\lin200\fi-200{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone Legacy Bullet 1}{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\par}\pard\s0\ltrpar\tx360\sl240\slmult1\li200\lin200\fi-200{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone Legacy Bullet 2}{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\par}\pard\s0\ltrpar\tx360\sl240\slmult1\li200\lin200\fi-200{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone Legacy Bullet 3}{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\par}\pard\s0\ltrpar\tx360\sl240\slmult1{\ltrch\f1\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\par}\pard\s0\ltrpar\tx360\sl240\slmult1{\ltrch\f2\fs22\i0\b0\strike0\cf0\cb1\highlight1\ulc0\ulnone\par}}

-Amul.

Html exported from RadRichTextBox will be shown in Outlook with some formatting issues related to lists. The text in a paragraph will be shown with the formatting of its bullet.

The reason is that the content is exported to HTML as a styled list level which Outlook does not understand. The same applies to MS Word as well. This can also lead to formatting issues when the document is later imported in RichTextBox.

You can check the attached screenshot for reference.

Workaround: 
Change the styles to export as inline properties:
htmlProvider.ExportSettings.StylesExportMode = StylesExportMode.Inline;

In Word I can place text where ever I want, when I use textfields. This should also be possible with RadRichTextBox.

When exporting to PDF this should result in an extra layer for the textfield.

add support for markup "markdown" in my opinion it would be very useful!

To reproduce:

• Create two lists one after another
• Select the second by using the keyboard 
• Press delete and then Ctrl+z (undo)

This works fine when the list is selected with the mouse. 

This can be reproduced with the provided .docx. In Word the image floats in the empty space below the text but the RichTextBox has it inline and overlapping text.

Removing the rectangle from around the image in the source document has no affect.

Hi support,

We have a problem when we copy a text from MS word to RitchTextBox.
If the text copied uses an style that the namecontains tilde, then style name on the ritchtextbox is broken with strange characters.
All works well with this strange characters, but if you export to html and then import to ritchtextbox, the style is lost ...

This is a big problem because in spanish, many styles have tildes. When our user copy content from word they have problem with html format export / import.


I Attach a MS Word docx with a style with tildes:

Steps to reproduce it:

1- Open MS Word attached.
2- Copy the content.
3- Open a ritchTextBox Editor
4- Paste the content.
5- Export to html
6- Import the html.

You can see now, that the style are lost, and the name of the style contains strange characters.

Similar issue its happen when open a Word Docx with styles with tildes from ritchTextBox, not include strange characters but the style is lost.

Thanks for you support,

Hi Guys,

Our application works with a document storage and we use RadRichTextBox to allow users edit and view the documents. Unfortunately, many documents cannot be opened due to the following exception we get:

Unable to cast object of type 'Telerik.Windows.Documents.Model.FieldRangeStart' to type 'Telerik.Windows.Documents.Model.AnnotationRangeEnd

As result we receive complains from our users. Could you please facilitate with solving it? 

I have attached a simple test application with the problematic document as well the stacktrace. 

Best regards,

Yaroslav 

The label for Decimal alignment is truncated.