Completed
Last Updated: 11 Apr 2019 14:50 by Dimitar
Release R2 2019 (LIB 2019.1.415)
Use attached to reproduce.

Tested on Windows 10 (1607 and 1703)

Workaround:

RadControl.EnableDpiScaling = False

Completed
Last Updated: 18 May 2011 04:38 by Jesse Dyck
In addition, if this ContextMenu is called from a control contained in an autohide DockWindow that is currently expanded, this window becomes collapsed.
Completed
Last Updated: 19 Jun 2017 12:59 by ADMIN
ADMIN
Created by: Dimitar
Comments: 2
Category: Dock
Type: Bug Report
5
To reproduce:
Use the approach here:  http://docs.telerik.com/devtools/winforms/dock/object-model/customizing-floating-windows

Workaround:
private void RadDock1_FloatingWindowCreated(object sender, Telerik.WinControls.UI.Docking.FloatingWindowEventArgs e)
{
    e.Window = new MyWindow(radDock1);
    e.Window.FormBorderStyle = System.Windows.Forms.FormBorderStyle.Sizable;

}

class MyWindow : FloatingWindow
{
    public MyWindow(RadDock dock): base(dock)
    {

    }
    protected override CreateParams CreateParams
    {
        get
        {
            CreateParams cp = base.CreateParams;
            cp.Style |= NativeMethods.WS_THICKFRAME;
            return cp;
        }
    }
}
Completed
Last Updated: 06 Feb 2015 14:54 by ADMIN
We have a somewhat complicated application in which we have a RadDock inside another RadDock.
Everything seems to work just fine, with one exception.

When we resize the application window itself, the ToolWindow and DocumentWindow controls don't properly redraw their areas..
Completed
Last Updated: 15 Jan 2015 17:43 by ADMIN
I put a tree on toolwindow (the tree Nodes are chekbox)  , when I autohide the toolwindow and show it again the font of tree nodes change and also the nodes which were checked change to uncheck
Completed
Last Updated: 06 Feb 2015 17:02 by ADMIN
It is caused when you open the solution for the first time, open the FrmUmre in design time, change the active window in RadDock and run the application. 

The error states: "The control Telerik.WinControls.UI.Docking.DocumentTabStrip has thrown an unhanded exception in the designer and has been disabled"
Completed
Last Updated: 11 Feb 2015 09:57 by ADMIN
If there is a RadDock in UserControl and second UserControl, which inherits the first one, then the RadDock€™s layout in the second UC is damaged in design and run-time.
Completed
Last Updated: 20 Oct 2014 12:20 by ADMIN
The DocumentTabStrip raises the SelectedIndexChanging event twice
Completed
Last Updated: 15 Jan 2015 16:57 by ADMIN
ADMIN
Created by: Alexander
Comments: 0
Category: Dock
Type: Bug Report
3
Hidden HostWindows are not loaded correctly when the load operation is performed twice.
Completed
Last Updated: 22 Jul 2015 11:00 by ADMIN
ADMIN
Created by: Peter
Comments: 0
Category: Dock
Type: Bug Report
3
Dock windows should keep its icon and image that is set for them in a previous state, no matter their form, tabbed, docked,
Completed
Last Updated: 10 Nov 2014 07:59 by ADMIN
These are the steps to reproduce the bug:

1. Start dragging a docked window tab (but don't leave the tab bounds for now).
2. While still holding the left mouse button, click the right mouse button to let the context menu appear.
3. Now drag the tab outside the tab bar until the window gets undocked (for example to the blue region above the docked windows).
4. Finish dragging by releasing the left mouse button.
5. Move the mouse cursor over the title bar of another docked window -> the window is undocked without interacting with it and will stick to the cursor until you click the mouse button to release it.

Workaround:
   bool flag = false;
        public Form1()
        {
            InitializeComponent();
            
            ContextMenuService menuService = this.radDock1.GetService<ContextMenuService>();
            menuService.ContextMenuDisplaying += menuService_ContextMenuDisplaying;

            DragDropService service = this.radDock1.GetService<DragDropService>();
            service.Starting += service_Starting;
        }

        void service_Starting(object sender, StateServiceStartingEventArgs e)
        {
            e.Cancel = flag;
            flag = false;
        }

        void menuService_ContextMenuDisplaying(object sender, ContextMenuDisplayingEventArgs e)
        {
            flag = true;
        }
Completed
Last Updated: 06 Feb 2015 15:31 by ADMIN
The issue is reproduced when the Theme service of Windows is stopped and classic windows desktop is used
Completed
Last Updated: 06 Feb 2015 11:43 by ADMIN
FIX. RadDock - with two nested docks, setting the DocumentTabsAlignment of the other dock automatically sets the same on the inner one and this cannot be changed. Once you change it and reload the design time, its setting is being reset.

To reproduce 
- add RadDock with couple DocumenWindows in it
- add second RadDock with coupld DocumentWindows in it, in one of the windows of the first dock
- set Raddock2 DoumentTabsAlignment to top
- set DocumentTabStrip2 TabStripAlignment also to top or default
- drag a radbutton into documentwindow3 and double click it, to get a click event
- go into code view and remove the created event manually
- change back to form view. the alignment in DocumentTabStrip2 has been automatically changed to bottom
Completed
Last Updated: 15 Oct 2013 03:37 by ADMIN
To reproduce:
- Add 2 DockWindows and dock it Add about 10 controls in one of the windows. AutoHide them and show them one after another, you will notice that the old one is visible somewhere in the middle of the animation.
- Also you will notice that AutoHideWindowDisplayed and AutoHideWindowDisplaying events are fired twice.
Completed
Last Updated: 15 Jan 2015 16:41 by ADMIN
1. Create a new project with RadDock and add 5 tool windows.
2. Dock all tool windows to bottom.
3. Reset the order of the tool windows to not be 1-5
4. Set the group to auto-hide
5. Save dashboard layout
6. Load dashboard layout
Completed
Last Updated: 16 Jan 2015 14:16 by ADMIN
1. Create a project with RadDock.
2. Add several tool windows.
3. Run the project.
4. Auto hide all tool windows at the bottom.
5. Close the last tool window.
6. Save the layout.
7. Load the layout.
Completed
Last Updated: 11 Feb 2015 11:58 by ADMIN
ADMIN
Created by: Julian Benkov
Comments: 0
Category: Dock
Type: Bug Report
3
I have issues with Databindings for RadToggleButton and RadDock ToolWindow.

Here are 3 scenarios to try with my repro application.

ToggleButton
Click the radToggleButtonElement1, notice that the binding never occurs.

ToolWindow Docking issue 1
Dock the toolWindow1 to the left over ToolWindow2
Click toolWindow2
Click toolWindow1
Click toolWindow2
Notice each time you click another tool window, the binding is triggered even if the property value hasn't changed.

ToolWindow Dockin issue 2
Dock the toolWindow1 to the left over toolWindow2
Notice that the binding is triggered, but with the previous value (Floating instead of Docked)
close the toolWindow1
Notice that the binding is triggered, but with the previous value (Docked instead of Hidden)
Approved
Last Updated: 19 Apr 2018 13:49 by ADMIN
If you drag a regular form to the top of the screen it will be maximized. This should work with the floating window as well.
Completed
Last Updated: 30 Apr 2019 07:59 by ADMIN
Release R2 2019
How to reproduce: check the attached project and video

Workaround:
public partial class RadForm1 : Telerik.WinControls.UI.RadForm
{
    public RadForm1()
    {
        InitializeComponent();
        radDock1.FloatingWindowCreated += RadDock1_FloatingWindowCreated;
    }

    private void RadDock1_FloatingWindowCreated(object sender, Telerik.WinControls.UI.Docking.FloatingWindowEventArgs e)
    {
        e.Window = new MyWindow(this.radDock1);
    }
}

public class MyWindow : FloatingWindow
{
    SizeF oldDpi = new SizeF(1, 1);

    public MyWindow(RadDock dockManager) : base (dockManager)
    { }
    protected override void HandleDpiChanged()
    {
        
        base.HandleDpiChanged();
        SizeF descale = new SizeF(1f / this.FormElement.DpiScaleFactor.Width, 1f / this.FormElement.DpiScaleFactor.Height);
        this.Scale(descale);
        var dpi = NativeMethods.GetMonitorDpi(Screen.FromRectangle(this.Bounds), NativeMethods.DpiType.Effective);
        if (oldDpi != dpi)
        {
            SizeF sz = new SizeF(dpi.Width / oldDpi.Width, dpi.Height / oldDpi.Height);

            this.Scale(dpi);
        }

        oldDpi = dpi;
    }
}
Completed
Last Updated: 17 Mar 2015 14:25 by ADMIN
To reproduce:
- Add 2 RadFoms to a raddock in mdi mode.
- Dock the windows by using the left or right docking guide in the center.
- You will notice that the behavior is the same as like using the left or right side guides.

1 2 3 4 5 6