Approved
Last Updated: 21 Oct 2019 15:18 by ADMIN

The bug can be reproduced on iOS 13 only. It is not reproducible on earlier versions of iOS. Run the attached project on iOS 13 device or Simulator to reproduce it.

Sometimes when focusing an entry and the onscreen keyboard shows up, the ListView is not scrolled correctly, so the entry is overlapped by the keyboard. The ListView layout appears messed up after that and the scrolling does not behave correctly.


Approved
Last Updated: 21 Oct 2019 07:32 by ADMIN
Created by: Safan
Comments: 0
Category: DataGrid
Type: Bug Report
1

Refer to the attached reproducible.

1. Run app and apply a filter: "Contains 0"

2. Notice #40 is in the correct location, between #30 and #50

3. Press the button on the bottom of the page to go BlankPage and then navigate back.

4. Observe #40 is now at the end of the rows even though the filter is clearly applied.

Look in MainPageViewModel.cs lines 42 to 49. When the navigation back occurs, this code is executed.  I can reproduce the problem with both Replace and Add+Remove operations.

public override void OnNavigatedTo(INavigationParameters parameters)
{
    base.OnNavigatedTo(parameters);

    if (!parameters.ContainsKey("from"))
    {
        var items = new ObservableCollection<MyModel>();
        for (var i = 1; i <= 100; i++)
            items.Add(new MyModel { Number = i.ToString() });
        Items = items;
    }
    else
    {
        var item = Items[39];

        // Bug Test #1 - using ObservableCollection Reset
        Items[39] = item;

        // Bug Test #2 - using ObservableCollection Remove & Add
        //Items.RemoveAt(39);
        //Items.Insert(39, item);
    }
}

Approved
Last Updated: 18 Oct 2019 11:40 by ADMIN
Created by: Prasanth
Comments: 0
Category: TabView
Type: Bug Report
0

When longer string is used for HeaderText the text could not be wrapped. Also the issue occurs when using Label with LineBreakMode="WordWrap" inside the TabViewHeaderItem.Content:

<telerikPrimitives:TabViewItem>
    <telerikPrimitives:TabViewItem.Header>
        <telerikPrimitives:TabViewHeaderItem>
            <telerikPrimitives:TabViewHeaderItem.Content>
                <Label Text="Lorem ipsum dolor sit amet, consectetur adttert etertert erterter ipiscing elit." LineBreakMode="WordWrap"/>
            </telerikPrimitives:TabViewHeaderItem.Content>
        </telerikPrimitives:TabViewHeaderItem>
    </telerikPrimitives:TabViewItem.Header>
    <telerikPrimitives:TabViewItem.Content>
        <Label Margin="10" Text="Label" />
    </telerikPrimitives:TabViewItem.Content>
</telerikPrimitives:TabViewItem>

 

Approved
Last Updated: 17 Oct 2019 14:11 by ADMIN
When the series data is updated and axis labels are redrawn, occasionally the default DateTime format is shown in DateTimeContinuousAxis.
Approved
Last Updated: 17 Oct 2019 07:06 by ADMIN
When I switch from Multi-day view to Day view it doesn't appear to redraw correctly on UWP. I can switch from Month to Day view and it's fine.

The behaviour I'm seeing is that it doesn't hide the multi-day view appointments and then doesn't correctly draw the day view ones. Please see the screen shot attached.
Approved
Last Updated: 15 Oct 2019 09:34 by ADMIN

Column names in column selector are not visible in Android the first time the column selector is shown. This happens only in the case UserFilterMode is disabled. 

Approved
Last Updated: 16 Oct 2019 12:26 by ADMIN
Created by: Grant
Comments: 1
Category: Calendar & Scheduling
Type: Bug Report
1

I've attached a handler to the ViewChanged event of the Calendar component.

The event fires on Android but not on UWP. I've tried changing the view type using the calendar controls and also programatically but the event is not being fired.

Approved
Last Updated: 10 Oct 2019 13:49 by ADMIN
With Automatic LoadOnDemand, once all items are loaded and IsLoadOnDemandEnabled is set to false, when I scroll till the end the loading indicator keeps flickering on knowing that no more items are called.
Approved
Last Updated: 17 Oct 2019 10:32 by ADMIN

We have implemented chat functionality using Telerik RadChat component. The problem is that the scroll functionality doesn't scroll fully to the bottom on IOS. It randomly stops somewhere in between. The same code runs perfectly on Android. Below I have attached an example code of our solution.


<telerikConversationalUI:RadChat 
          BackgroundColor="White" 
          Grid.Row="1" 
          x:Name="chat" 
          Author="{Binding Me}"
          ItemsSource="{Binding Items}"
          AutoScrollMode="Always"
          ItemConverter="{StaticResource SimpleChatItemConverter}" 
          SendMessageCommand="{Binding NewMessageCommand}"
          ItemTemplateSelector="{StaticResource CustomChatItemTemplateSelector}"
          SendMessageButtonImage="ic_send_green">
</telerikConversationalUI:RadChat>
Approved
Last Updated: 10 Oct 2019 08:53 by ADMIN
When you have custom ItemTemplates defined with different height, scrolling up through the items causes flickering, also you cannot scroll down to display all the items.
Approved
Last Updated: 08 Oct 2019 11:05 by ADMIN
if the swipe content of the cells are buttons, dragging the buttons up and down will keep the swiped cells in the same position of the screen, creating unexpected animations and showing the entire swipe content of the cell.
Approved
Last Updated: 08 Oct 2019 10:45 by ADMIN
When swiping a cell, the swipe content of the cell will be shown if the swipe threshold is reached.  On iOS, the swipe content of another cell can be shown immediately by swiping another cell (which is an expected behaviour).  However on Android, when the user swipes another cell, the swipe content of the other cell isn't shown (while the swipe content of the first cell becomes hidden).  The user has to swipe the other cell again to show the swipe content.
Approved
Last Updated: 08 Oct 2019 09:24 by ADMIN
If there is an input control (Editor, Entry) inside the ItemTemplate of the TreeViewDescriptor and its Text is bound to any property of the data item, changing the ItemsSource of the TreeView raises an exception of type AccessViolationException.
Approved
Last Updated: 04 Oct 2019 09:48 by ADMIN
Currently IsCheckedChanged command is raised when the BindingContext of the CheckBox is updated and this is a change in the behavior compared to previous releases.
Approved
Last Updated: 07 Oct 2019 10:08 by ADMIN

Activating the ItemHold event of an item in a list view requires holding down an item for a while.  On a physical/virtual Android device and a virtual iOS device, this can be done by holding down the mouse/finger lightly on an item for a short period of time.  However, on a physical iOS device (I am using a physical iPhone 6s to test this), holding down the item lightly with my finger won't activate the ItemHold event, and I have to hold the item really hard on the screen in order to activate it (similar to using 3D Touch / Force Touch, and I cannot reliably activate the ItemHold event possibly because my force is sometimes not hard enough).  I noticed this behaviour on the physical iOS device since the ItemHold event got implemented in early 2018.

I created a simple application to demonstrate the issue.  The app displays an alert when the user taps/holds an item in the list view.  On a physical iOS device, holding down an item in the list view requires the user to press the item very hard on the screen.

Thanks,
Kori

Approved
Last Updated: 02 Oct 2019 13:33 by ADMIN
Created by: Jing
Comments: 0
Category: Calendar & Scheduling
Type: Bug Report
0
If you set selected date range when the Calendar is loaded, the selection is not visualized.
Approved
Last Updated: 01 Oct 2019 13:04 by ADMIN
When you update the data in the chart so that the vertical axis values are changed - the annotation does not properly update and stays at the same location.

Approved
Last Updated: 30 Sep 2019 12:38 by ADMIN
If there are input controls inside the templates, updating a property of any data item though an input control ( such as Entry, NumericInput, etc),  caused the control to lose focus.
Approved
Last Updated: 14 Oct 2019 11:02 by ADMIN
By specification, names are an atomic symbol uniquely defined by a sequence of characters. However, when importing a document with names defined as an empty sequence a handled InvalidCastException is thrown which leads to missing page content.
Approved
Last Updated: 19 Sep 2019 10:23 by ADMIN

If you set SelectedDate when the Calendar control is created, does not take any effect in the UI on iOS. 

As a workaround, set SelectedDate at a later stage.

1 2 3 4 5 6