Approved
Last Updated: 03 Jan 2017 20:49 by ADMIN
ADMIN
Created by: Petar Mladenov
Comments: 0
Category: TreeView
Type: Feature Request
4
Add 'None' to the selection mode enum
Approved
Last Updated: 03 Jan 2017 20:29 by ADMIN
ADMIN
Created by: Telerik Admin
Comments: 0
Category: TreeView
Type: Feature Request
4
ExpandAll() is a UI operation which blocks the UI thread.
Approved
Last Updated: 03 Jan 2017 20:28 by ADMIN
ADMIN
Created by: Tina Stancheva
Comments: 0
Category: TreeView
Type: Feature Request
6
Expose IsDropBeforeAllowed, IsDropAfterAllowed and IsDropInsideAllowed properties in order to facilitate the implementation of complicated drag/drop scenarios in MVVM scenarios.

Update: The suggested approach would be to use an attached behavior for DragDropManager.DragOverEvent in order to change the default TreeView behavior.
DropAction property of a TreeViewDragDropOptions instance could be used to customize the drop operation.
Also, the DropPosition property of the TreeViewDragDropOptions instance could be used to check current drop case.
An instace of TreeViewDragDropOptions could be retreived from DragOverEvent event arguments.
Approved
Last Updated: 03 Jan 2017 20:28 by ADMIN
ADMIN
Created by: Telerik Admin
Comments: 0
Category: TreeView
Type: Feature Request
6
Improve selection performance.
Approved
Last Updated: 29 Dec 2016 16:05 by Balaram Barange
When IsVirtulizing is set to true and there are many items in the tree view pressing several times PageUp key brings the view port to the beginning of the tree rather to the previous page.
Approved
Last Updated: 29 Dec 2016 16:03 by ADMIN
Rendering issues occure when using Hierarchical virtualization mode and bring into view.
The issue is hit in both platforms - WPF and Silverlight. 
Approved
Last Updated: 29 Dec 2016 16:01 by Shrinand
When placed in grid column with Auto width and had its own width set to Auto, the RadTreeView does not scroll.
Approved
Last Updated: 29 Dec 2016 16:01 by ADMIN
When the TreeView's ScrollViewer is Visible, changing the tree's width to 0 them back to Auto breaks the scrolling function of the ScrollViewer.
The workaround is to make the TreeView Collapsed before setting the Width to 0 and make it Visible before setting the Width back to Auto.

Another workaround: Use visibility instead of Width=0.
Approved
Last Updated: 29 Dec 2016 16:00 by ADMIN
SelectedItem property should not accept RadTreeViewItem objects when is data bound.

Reason for decline:
Approved
Last Updated: 29 Dec 2016 15:50 by Bob
SelectedItems collection not updated when items are removed
Approved
Last Updated: 29 Dec 2016 15:28 by ADMIN
Setting a non-default value to the RadTreeView ItemsIndent property disarranges the lines
Approved
Last Updated: 29 Dec 2016 15:16 by ADMIN
Scenario: Databound TreeView with IsSelected bindings between item and container. Adding a selected data object to the ItemsSource does not fire the Selected event.
Approved
Last Updated: 29 Dec 2016 14:43 by ADMIN
The vertical scroll cannot be moved via the mouse wheel or by clicking on the scrollbar's thumb after the End key is pressed. This is reproducible ONLY if the UI virtualization is enabled and if there are many items (500-1000+).
Approved
Last Updated: 29 Dec 2016 14:39 by ADMIN
The TreeViewItems are expanded and collapsed on MouseLeftButtonUp which leads to an expand/collapse operation even if the MouseLeftButtonDown event was fired by another element. This can be easility reproduced if you hold down the mouse left button over any element outside the RadTreeView and then releasing it over any RadTreeViewItem when the RadTreeView IsExpandOnSingleClickEnabled is True.

It can also be reprorduced with the following steps:
1) left click on a node and hold the mouse button down
2) release the mouse when over a non-selected node that has children.
The result is expanding/collapsing the unselected node.
Approved
Last Updated: 29 Dec 2016 14:26 by ADMIN
Use virtualization in hierarchical mode. Select a RadTreeViewItem that has parent. Move it somewhere in the source collection of the parent programmatically - reorder or sort. The item will remain in Museover State forever.

Perform the same steps with Recycling mode, there might be missing RadtreeViewItems (not rendered at all) after the sort / reorder operation.
Approved
Last Updated: 28 Dec 2016 15:13 by rousso
TreeView Virtualization Mode is Recycling (the default one). In the ItemTemplate there is a RichTextBox with HtmlFormatProvider. Changing ItemsSource of the TreeView runtime produces null reference exception in TreeViewPanel.CleanupRange().
The Exception comes from the RecyclingItemContainerGenerator.Recycle method (http://msdn.microsoft.com/en-us/library/cc452208(v=vs.110).aspx). 
As a workaround if applicable, user can use the HierarchicalVirtualization mode:
    <telerik:RadTreeView  telerik:TreeViewPanel.TreeVirtualizationMode="Hierarchical"
Approved
Last Updated: 27 Dec 2016 12:48 by ADMIN
In a virtualized TreeView, after ExpandAll and scroll operations, there are gaps in the TreeViewPanel.
Approved
Last Updated: 27 Dec 2016 12:47 by ADMIN
RadTreeViewItem.AutomationProperties.Name is not read correctly since version 2011.2
Approved
Last Updated: 27 Dec 2016 12:46 by ADMIN
RadTreeView and RadTreeViewItem ExpandAll() method sets the IsExpanded property to True to all items even if an Item has no children to display. This causes an issue when using the DefaultImageSrc and ExpandedImageSrc properties as the last-level items will be displayed with an ExpandedImageSrc as their IsExpanded property it set to True. However, as these items have no children, they should use the DefaultImageSrc.
Approved
Last Updated: 27 Dec 2016 12:22 by ADMIN
We have RadContextMenu in RadTreeView when we press the App key or shift+F10 the context menu opens as intended but it triggers the parent TreeViewItem hover effect