Declined
Last Updated: 09 Jul 2019 13:06 by ADMIN

See attached picture together with these steps.

  1. select a item in the list
  2. import multiple other items in one go -> the last imported item is marked as selected (this is OK), the previously selected item is no longer marked as selected (this is OK).
  3. SHIFT select the first item of the ones imported in step 2 -> the items between the last imported item and the first imported item are selected, but the item that was selected in step 1 is now also selected...

 

Thanks in advance!

Bart

 

Approved
Last Updated: 09 Jul 2019 11:28 by ADMIN
If the DataMemberBinding of a GridViewMultiColumnComboBoxColumn points to a nested property, the value of that property is displayed in view mode and the DisplayMemberPath is not respected.
Approved
Last Updated: 09 Jul 2019 08:35 by ADMIN
Add an API that can be used to cancel or modify the editing of files and folders. For example, you can introduce Editing and Edited events for the dialog which can be fired when the selected file goes into edit mode and after the editing is committed.
Declined
Last Updated: 09 Jul 2019 06:32 by ADMIN
when open the RadRibbonBackstage by click the ApplicationButton ,if click some one area which is not  the above ApplicationButton,
then the RadRibbonBackstage  is closed,the ApplicationButton's fluent mouseover effect don't disappear
check the Additional file .
Completed
Last Updated: 08 Jul 2019 11:17 by ADMIN
Release LIB 2019.2.708 (07/08/2019)
When there is a document with wrapped cells in it, often the content of the cell is not properly displayed in RadSpreadsheet. This results in the content also being shown over the cell below.
Completed
Last Updated: 05 Jul 2019 09:33 by ADMIN
Release LIB 2019.2.708 (7/8/2019)
This happens when RadWindowInteropHelper.AllowTransparency is set to False and RadWindow is implemented as UserControl. The Window need to be maximized firstly on the main screen and then on the secondary in order for issue to be reproduced.

The issue also affects the ToolWindow that RadDocking uses for its floating Pane. In order to reproduce the problem, the primary monitor needs to have its DPI higher than the secondary one.
Completed
Last Updated: 05 Jul 2019 08:44 by ADMIN
Release LIB 2019.2.708 (7/8/2019)
When Culture is set to Russian("ru-RU") control shows unexpected "c" symbol and also the property IsCurrenySymolVisible set to False is not respected and the Ruble symbol stays visible.
Approved
Last Updated: 05 Jul 2019 08:06 by ADMIN
Implement a way to group columns cells vertically.
Completed
Last Updated: 05 Jul 2019 05:37 by ADMIN
Release LIB 2019.2.708 (7/8/2019)
OpenFile/SaveFile dialog or ExplorerControl with Multiselect, Details View and Filter applied.

Click on a file / fodler in gridview - argument exception occurs.

"Property FileSystemInfo is not defined for type System.Object."
Completed
Last Updated: 04 Jul 2019 10:16 by ADMIN
Release LIB 2019.2.708 (7/8/2019)
Created by: Dimitar
Comments: 0
Category: NavigationView
Type: Bug Report
0

<telerik:RadNavigationViewItem Content="Test" Foreground="Blue"/>

 

Possible workaround:

 

<telerik:RadNavigationViewItem>

    <TextBlock Text="Test" Foreground="Blue"/>

<telerik:RadNavigationViewItem>

 

Completed
Last Updated: 03 Jul 2019 14:27 by ADMIN
Release LIB 2019.2.708 (7/8/2019)
The Window gets clipped on the right side when using a dual monitor setup when the taskbar is on the left/right side of the screen and the app must be running maximized on the secondary screen.
Completed
Last Updated: 03 Jul 2019 13:21 by ADMIN
Release LIB 2019.2.708 (7/8/2019)
If you host a RadMaskedTextInput control in the listbox items and focus the input, then pressing Space will send the focus to the corresponding RadListBoxItem instead of adding an empty space character into the text input.

To work this around, create a custom RadListBox control and override its HandleKeyboardInput method.
public class CustomListBox : RadListBox
{
    protected override bool HandleKeyboardInput(Key key)
    {
        if (key == Key.Space)
        {
            return false;
        }
        return base.HandleKeyboardInput(key);
    }
}
Completed
Last Updated: 03 Jul 2019 13:20 by ADMIN
Release LIB 2019.2.708 (7/8/2019)

The ribbon tab doesn't get selec if you click in the exact middle of the header of RadRibbonTab.

To work this around, extract the ControlTemplate of RadRibbonTab and move the Grid with x:Name="ContentPanel" before the Grid with x:Name="HeaderPanel".

Completed
Last Updated: 02 Jul 2019 13:58 by Hussein
ADMIN
Created by: Stefan
Comments: 7
Category: GridView
Type: Feature Request
14
As of R1 2018 RadGridView supports pinning columns both on its left and right side. The new properties that control the right-side behavior are: RightFrozenColumnCount and RightFrozenColumnsSplitterVisibility.
Approved
Last Updated: 02 Jul 2019 11:53 by ADMIN
Currently the alternation brush takes precedence over the selection brush. Implement a way to change this behavior.
Approved
Last Updated: 01 Jul 2019 13:00 by ADMIN
Created by: Martin Ivanov
Comments: 0
Category: UI for WPF
Type: Feature Request
0
Currently, the digitally signed assemblies are distributed only as a .zip file containing the dlls. Introduce nuget packages for them.
Declined
Last Updated: 28 Jun 2019 14:11 by ADMIN

Hi Telerik,

We are converting XAML content into PDF file with below code.

private byte[] Xaml2Pdf(string xamlContent)
{
	try
	{
		XamlFormatProvider xamlFormatProvider = new XamlFormatProvider();
		PdfFormatProvider pdfFormatProvider = new PdfFormatProvider();
		PdfExportSettings exportSettings = new PdfExportSettings();
		exportSettings.ContentsCompressionMode = PdfContentsCompressionMode.Automatic;
		exportSettings.ContentsDeflaterCompressionLevel = 9;
		exportSettings.DocumentInfo = new PdfDocumentInfo() { Producer = "ALIS", Author = "ALIS", Creator = "ALIS" };
		exportSettings.ImagesCompressionMode = PdfImagesCompressionMode.Automatic;
		exportSettings.ImagesDeflaterCompressionLevel = 9;
		pdfFormatProvider.ExportSettings = exportSettings;

		byte[] content = pdfFormatProvider.Export(xamlFormatProvider.Import(xamlContent));

		return content;
	}
	catch
	{
		throw;
	}
}
When we convert attached XAML content with above code it will gives an output pdf file but when we open pdf file into Adobe Reader DC it will display some error message before opening it.

Currently we are using 2016.2.905.45 version.

Previously when we was use 2016.1.302.45 version at that time we didn't notice same issue.

Please assist.

Thank you.
Approved
Last Updated: 28 Jun 2019 13:54 by ADMIN
Created by: Dinko
Comments: 0
Category: GridView
Type: Bug Report
1
Fix Section 508 Compliance accessibility errors. 
Approved
Last Updated: 28 Jun 2019 11:22 by ADMIN
By specification, the InteractiveForm fields can have the same name if they are descendants of a common ancestor. Such fields are different representations of the same underlying field; they should differ only in properties that specify their visual appearance. When such a document is imported an ArgumentException: 'An item with the same key has already been added.' is thrown, which leads to non-editable fields in RadPdfViewer.