Unplanned
Last Updated: 17 Mar 2017 14:36 by ADMIN
Completed
Last Updated: 10 Mar 2017 06:43 by joan miquel fernandez cañadas
The TabItem doesn't changes when selected Item in the VS2010 designer.

UPDATE:
The issue is present also in the VS2008 and Blend.
Unplanned
Last Updated: 17 Feb 2017 14:40 by ADMIN
By default, when selecting through the tab items, the first focusable element within each RadTabItem will gain focus. This is the behavior of the standard  RadTabItem as well. Provide an option to disable this default selection through a boolean property.
Won't Fix
Last Updated: 23 Jan 2017 12:23 by ADMIN
When the SelectedIndex property is read during animation the CLR wrapper will throw InvalidCastException because of invalid cast to int. The object returned from GetValue is DeferredReference object.
Unplanned
Last Updated: 04 Jan 2017 14:34 by Anthony
Created by: Anthony
Comments: 1
Category: TabControl
Type: Bug Report
1
In version 2016.2.613.45 of the Office2013 Theme, there is a problem in the control template for the RadTabControl. The ContentBorder element properly gets it's BorderThickness from the TemplatedParent, but the PlacementStates VisualStates override it with hard-coded Thickness (0,1,1,1 in the case of the "Left" Visual State) in their storyboards rather than doing an appropriate transform of the Thickness. This makes it impossible to override the BorderThickness for the control in any state other than the default layout without copying and replacing the entire control template. This appears to be a change in behavior since the (Februray 2016?) release, but I cannot be sure as the old theme files were uninstalled during the upgrade and the telerik.windows.controls.navigation.baml file is not properly decompiled in JustDecompile.
Unplanned
Last Updated: 03 Jan 2017 21:24 by ADMIN
Workaround: Set HorizontalScrollBarVisibility property to Visible in order to show the scrollbar: 
<telerik:RadTabControl ScrollViewer.HorizontalScrollBarVisibility="Visible" .../>

or use Loaded event of TabControl and change the Height in order to trigger SizeChanged:
private void xTab_Loaded(object sender, RoutedEventArgs e)
{
    this.Height++;
    this.Height--;
}
Unplanned
Last Updated: 03 Jan 2017 21:20 by ADMIN
The SelectedTabContent is not added when the control is loaded in memory and a we try to create a ImageSource out of the UserControl hosting the TabControl
Unplanned
Last Updated: 03 Jan 2017 21:19 by ADMIN
If you define two UserControls in a project and you add two RadTabControls - one RadTabControl per UserControl, then in design-time you can only change the selection of one of the tab components.
Unplanned
Last Updated: 03 Jan 2017 21:09 by ADMIN
ADMIN
Created by: Pavel R. Pavlov
Comments: 0
Category: TabControl
Type: Bug Report
3
When you have implicit DataTemplates applied to items the binding expression is lost on selection changed.
Unplanned
Last Updated: 03 Jan 2017 21:08 by ADMIN
Selecting tabs with same names from the drop down menu always selects the first one.
Unplanned
Last Updated: 03 Jan 2017 21:06 by ADMIN
Change the TabItems layout when the TabControl OverflowMode="Wrap" with TabStripPlacement="Bottom" :
1. Let's say the wrap results in 3 lines. What we would expect is line 1 and 2 to be filling the entire width and line 3 to be partially filled. What we experience is line 1 partially filled and lines 2 and 3 filling the entire width 
2. When clicking on an item the lines swap around. The partially filled line can end up on top, in the middle or on the bottom. Clicking on items that cause tab rows to move up should re-flow the wrap.
3. Ideally - to look good - the logic should stretch the 'complete' rows to the entire width - i.e. it should adjust tab sizes to fill the entire width available on 'full' rows.
Unplanned
Last Updated: 03 Jan 2017 21:05 by ADMIN
In the VS2010 designer the selected tab is the last one even if the SelectedIndex proeprty of the TabControl is set to 0. The issue can be reprodiced in a scenario where the RadTabControl is defined in a RadWindow control.
Unplanned
Last Updated: 03 Jan 2017 21:05 by ADMIN
Using Xaml declared tab control with identical tab item headers will result in selecting the first occurance of selected text from the drop down content.
Add support for distinguishing different items in the drop down content (use DropDownDisplayMode=Visible) during selection and match to the corresponding TabItem.
Unplanned
Last Updated: 03 Jan 2017 21:04 by ADMIN
Click event of a Button in the HeaderTemplate is not fired properly when another button outside the tab has IsDefault property set to true
Unplanned
Last Updated: 03 Jan 2017 21:04 by ADMIN
SelectedItem does not respect the Reset collection changed action.
Unplanned
Last Updated: 03 Jan 2017 20:58 by ADMIN
When the RadTabControl AllowDragReorder property is set to True and the control contains multiple rows with tabs, the dragging operation cannot be properly executed and completed.
Unplanned
Last Updated: 03 Jan 2017 20:58 by ADMIN
When a TabItem has a width (and the TabControl - don't) and if you try to resize the window so that the width of the window is less than the width of the TabItem - the TabItems start jumping
Unplanned
Last Updated: 03 Jan 2017 20:57 by ADMIN
When a RadDocking is located inside a RadTabControl and the RadPaneGroup contains only one RadPane the content is scrolled(if located inside a ScrollViewer)
Unplanned
Last Updated: 03 Jan 2017 20:53 by ADMIN
Workaround:
Use the PreviewMouseLeftButtonUp and PreviewMouseLeftButtonDown events of the DropDownMenuItem. Handle the first event and invoke DropDownMenuItem.MouseLeftButtonUpEvent in the second in order to workaround the MouseLeftButtonUp event fired from the DropDownMenuButton and to call the logic for selecting the tabitem only when the dropdown menuitem is clicked (not just hovered). 

<Style TargetType="telerikTabControl:DropDownMenuItem">		
        <EventSetter Event="PreviewMouseLeftButtonUp" Handler="DropDownMenuItem_PreviewMouseLeftButtonUp" />
        <EventSetter Event="PreviewMouseLeftButtonDown" Handler="DropDownMenuItem_PreviewMouseLeftButtonDown" />
</Style>

private void DropDownMenuItem_PreviewMouseLeftButtonUp(object sender, MouseButtonEventArgs e)
{		
		e.Handled = true;
}

private void DropDownMenuItem_PreviewMouseLeftButtonDown(object sender, MouseButtonEventArgs e)
{
	var item = (sender as DropDownMenuItem);
	MouseButtonEventArgs mouseEventArgs = new MouseButtonEventArgs(Mouse.PrimaryDevice, 0, MouseButton.Left);
	mouseEventArgs.RoutedEvent = DropDownMenuItem.MouseLeftButtonUpEvent;
	item.RaiseEvent(mouseEventArgs);
}
Unplanned
Last Updated: 03 Jan 2017 20:47 by ADMIN
ADMIN
Created by: Tina Stancheva
Comments: 0
Category: TabControl
Type: Feature Request
4
Improve the design-time support of the TabControl. For example add an option to add new RadTabItems in the control.