Unplanned
Last Updated: 26 Oct 2020 07:13 by ADMIN
When a DOCX document contains a table with fixed layout, and the table contains <tblGrid> element with improper widths (not coinciding with the ones visualized by MS Word), and such document is imported, the table is laid out with the width of the sum of the column widths imported from the table grid (tblGrid), instead of ones that could be correctly computed by the preferred width of the table cells. 

MS Word, for example, may ignore the widths specified in the tblGrid and compute new ones.

As a side effect, fixed-width tables can be laid out longer than their preferred width.
Unplanned
Last Updated: 12 Oct 2020 14:07 by ADMIN

RadRichTextEditor renders the text with a little bigger characters spacing than RadRichTextBox and MS Word.

Note: this text spacing problem can be observed in other Telerik controls as well.

Unplanned
Last Updated: 18 Sep 2020 06:55 by ADMIN
Created by: Maulik
Comments: 0
Category: RichTextEditor
Type: Bug Report
2
When the copied text doesn't contain any formating the Keep Text Only paste option should be applied.
Unplanned
Last Updated: 30 Jul 2020 04:33 by ADMIN
When the rtf document contains a table as the one below and the empty declaration is used in the following structure, the document cannot be imported:

{\fonttbl
{\f0 Verdana;}
{\f1 Times New Roman;}
{\f2 ;}
{\f3 Segoe UI;}}
Unplanned
Last Updated: 24 Jun 2020 08:57 by ADMIN

Invalid table layout when resizing a row on the second page

To reproduce:

- Add a table with several rows so there are some rows on the second page.

- Resize a row on the second page with the mouse.

Result: The table layout is not correct after the resize operation 

Unplanned
Last Updated: 10 Jun 2020 15:35 by ADMIN
Created by: Nitin
Comments: 3
Category: RichTextEditor
Type: Bug Report
1

Hi, 

Please look at the screen. when we load the attached email in Editor, bullet points are repeating. 


 

Regards,

 

Nitin Jain

Unplanned
Last Updated: 10 Jun 2020 07:30 by ADMIN

When importing an HTML file which contains table should align table cell content left and middle. Instead, it aligns them left and top.

Both browsers and MS Word center the content. 

Unplanned
Last Updated: 04 May 2020 13:52 by ADMIN

Hi, 

 

Please look at the attached html. when we load the attached HTML in Editor the last line appear like this. however when i open the same html in browses it looks fine. I have set the "text align" to justify and this is one of my requirement. 

 

Unplanned
Last Updated: 28 Apr 2020 08:30 by ADMIN

Run the Word-inspired project. Select the one whole paragraph, right below the Overview header, but so that caret is at the beginning of the next paragraph. Change text alignment to Justify. Then try to change text alignment to Left. It will not turn back to Left. Probable reason is that caret is at beginning of the next paragraph whose alignment is Left, so app thinks it should change it to Justify instead. This over-eagerness is described in forum thread ChangeParagraphTextAlignment is over-eager to change alignment. But in this case there is no workaround.

The solution is to set the value instead of toggle it, like the Word does. If text alignment was Left then setting to Left should again set it to Left. Also, caret position should not change the outcome of the action. Only the contents of the selection is relevant in deciding if action can be safely skipped.

Unplanned
Last Updated: 24 Apr 2020 10:14 by ADMIN

Case 1

   The editing capabilities of tables should be disabled when in ReadOnlyRange

Case 2,

    The Table tools are not hidden when changing the default tab ( see attached video).

Unplanned
Last Updated: 09 Apr 2020 08:47 by ADMIN
The images are not rendered when using .Net Core
Unplanned
Last Updated: 27 Mar 2020 14:48 by ADMIN
To reproduce:
 - Add a table where the width is set to 100%
 - Import the table and the export it:
private void radButton_Click(object sender, RoutedEventArgs e)
{
    var provider = new HtmlFormatProvider();
    string text = File.ReadAllText(@"..\..\default.html");
    rtb1.Document = provider.Import(text);
}

private void radButton1_Click(object sender, RoutedEventArgs e)
{
    var provider = new HtmlFormatProvider();
    provider.ExportSettings.StylesExportMode = StylesExportMode.Inline;
    string content = provider.Export(rtb1.Document);
    File.WriteAllText(@"D:\test1.html", content);
}

Workaround:
 Leave the export mode intact.
Unplanned
Last Updated: 10 Mar 2020 12:41 by ADMIN
When GoToBookmark method is called and the current position is before the bookmark, the screen is not repositioned, causing the bookmark sometimes to appear at the last visible row.
Unplanned
Last Updated: 19 Nov 2019 07:34 by ADMIN

In Word, for paragraphs in a list:

1. The bullet/number uses the value of the first line indent

2.1 The text on the first line is aligned according to the left indent when the left indent is smaller than the first line indent (the usual case).

2.2 If the first line indent is smaller than the left indent, the first line aligns with the rest of the text, using the value of the left indent property.

2.3 When there are tab stops, they are used for the position of the text. In RadRichTextBox, the text in the first line always aligns according to the FirstLine indent.

Also, tab stops can be used to position the text after the bullet/number.

Unplanned
Last Updated: 05 Sep 2019 10:17 by ADMIN
When deleting all content (e.g. Select All [CTRL+A] + Delete [Del]) in the document, it would be convenient for the user to preserve all formatting (local span formatting + local paragraph formatting + style) applied on the last paragraph. 

This will ensure that the user will continue edit the document with last current font, font family, etc.

If this operation is applied on an empty document, though, the styling of the single paragraph should be reset to the defaults for the document.
Unplanned
Last Updated: 26 Aug 2019 11:41 by ADMIN
When trying to import a document containing bookmark and BookmarkRangeEnd is after the last paragraph, a StackOverflowException is thrown in IntervalNode while trying to rebuild the document cache. (RadDocumentChildrenCache.RebuildTree()).

The same could be observed if the bookmark end is last in the header/footer, between table cells in the RadDocument body, or when all paragraphs after the bookmark range end are hidden (with vanish property).

Workaround: Detect the problematic annotations and remove them:
foreach (var rangeStart in document.EnumerateChildrenOfType<AnnotationRangeStart>())
{
    if (rangeStart.End == null || rangeStart.End.Parent == null || rangeStart.End.Parent.Parent == null)
    {
        //MessageBox.Show("This indicates a problem.");
        rangeStart.Parent.Children.Remove(rangeStart);
    }
}

Note: Until 2017 R2 SP1 release StackOverflowException is thrown, after this release an ArgumentException should be thrown.
Unplanned
Last Updated: 12 Jun 2019 13:58 by ADMIN

Please refer to the attached gif file.

Let's take for instance demo application with its default document, with text "RadRichTextEditor for WinForms" at the beginning in font Calibri of size 28. Suppose the user wants to add A, then empty line, then C in single line, followed by the rest of the document, and to have these three new lines in Times New Roman in size 10.

If there is no empty line, but letter B in middle line, then user can set caret to document start, set the font and size, and type A<Return>B<Return>C<Return>. And it would look fine (and even then, if we set caret just after B and press Return the new paragraph will have spacing after set to 7.5 for no apparent reason).

If we want an empty line instead of B in the line, then there is no simple way to do it. Typing A<Return><Return>C<Return> would produce a huge gap between A and C (we still first set the caret, and font and size). One way to accomplish what we want is to select all new text, set font size to something other than 10, and then back to 10 (which is also weird to have to do).

Unplanned
Last Updated: 06 Feb 2019 14:06 by ADMIN

Right-click on header/footer usually does nothing. If we double-click them we enter their edit mode. After we close header and footer and right-click on them we get context menu as if we are still in edit mode. If we scroll out of view of header/footer, and then back in, right-click will again do nothing.

Also, separate but similar bug, in demo document's footer there is a three-column table. It is possible to resize with the mouse all the columns widths, and even the row height. Mouse will change shape, as if in edit mode. It is not necessary to enter and leave edit mode like in previous case, the error is observable from the start. But if we scope out and scope back in the changes are undone, in a way like in previous case.

1 2 3 4 5 6