Declined
Last Updated: 04 Dec 2019 14:58 by ADMIN
Created by: luai
Comments: 4
Category: UI for WinForms
Type: Feature Request
0

I am working on a Windows Forms Application that load and print PDF document then unload that document  and load new one, but when i call unloadDocument() no new document was loaded :

                   RadPdfViewer rViewer = new RadPdfViewer();
                    rViewer.DocumentLoaded += RViewer_DocumentLoaded;
                    rViewer.LoadDocument(Filepath);
                    rViewer.LoadElementTree();
                    Application.DoEvents();
                    rViewer.PdfViewerElement.StopWaiting();
                    if (rViewer.IsLoaded)
                    { rViewer.UnloadDocument(); }

after unloadde the document i cannot load new PDF doccument?

Unplanned
Last Updated: 04 Dec 2019 11:27 by ADMIN
Created by: Jim
Comments: 0
Category: Forms/Dialogs/Templates
Type: Bug Report
0

Set one of the monitors to use 125% DPI scaling. Start the attached project on a monitor with 100% DPI scaling - the form is expected to be with size 400,400. Move the form to the monitor with 125% DPI scaling. You are expecting the form's size to be 500,500, but it is 507,521. Please refer to the screenshots.

Workaround:

Override the RadForm.ScaleControl method as follows:

    Protected Overrides Sub ScaleControl(factor As SizeF, specified As BoundsSpecified)
        Dim initialSize As Size = Me.Size
        MyBase.ScaleControl(factor, specified)
        Me.Size = TelerikDpiHelper.ScaleSize(initialSize, factor)
    End Sub

Unplanned
Last Updated: 02 Dec 2019 06:38 by ADMIN
Created by: n/a
Comments: 1
Category: Spreadsheet
Type: Bug Report
0

The UI behaivor of drag selection shows inconsistent behavior between WinForm vs WPF/Excel.

When you drag some cells for selection and keep dragging to the right (getting the out scope), the control scrolls to the right.

This behavior is common in Winform/WPF/Excel.

When you drag backward (to the left), WPF controls scroll back and so is Excel, while Winform controls does not scroll

Same thing for top and bottom scroll. Winform Spreadsheet control does not scroll. It may scrolls only to the right.

Another Caveat I see meanwhile is that when you scroll backwards until the row area, the pointer become row-resize pointer, or so

If you keep mouse moving around, it sometimes makes a horizontal line (possibly a guide for row resize?)

The issue in this case is that, it does not remove itself. the horizontal line stays there. It is not very annoying (as it is thin horizontal line) but is still a bug.

 

To reproduce,

create a empty Winform app, with the RadSpreadsheet Control, and Run

Drag from row C3 and to the right (around the scrollbar) the control scrolls to the right (this is not quite smooth though..)

Scroll right to AZ3 say, and drag backward back to C3, this now does not scroll back.

Same for top and bottom.

Do the same for WPF, it now works as expected

Do the same for MS Excel, it now works as expected.

Completed
Last Updated: 28 Nov 2019 14:07 by ADMIN
Release R1 2020
Currently when grouping the summary row for each group is shown. The ShowTotals property defines if total summary rows will be shown. Need an option to define if the group summary row will be shown.
Completed
Last Updated: 28 Nov 2019 14:06 by ADMIN
Release R1 2020
Created by: Tim
Comments: 0
Category: Map
Type: Feature Request
0
Completed
Last Updated: 28 Nov 2019 14:05 by ADMIN
Release R1 2020
Created by: Tim
Comments: 0
Category: Map
Type: Feature Request
0

I have noticed in the routing there is no maxSolutions parameter available when querying the bing map api routing parameter.   

https://docs.microsoft.com/en-us/bingmaps/rest-services/routes/calculate-a-route 

Unplanned
Last Updated: 28 Nov 2019 06:41 by ADMIN
Created by: Rene
Comments: 1
Category: ColorDialog
Type: Bug Report
0

Hi Guys,

 

ColorDialog on higher dpi has some small problems.

1. Size of dialog is larger so there is large gap in right and bottom part.

2. Selected radio button black circle is not in center of larger circle.

 

Best regards

Rene

Unplanned
Last Updated: 27 Nov 2019 14:47 by ADMIN
Unplanned
Last Updated: 25 Nov 2019 13:17 by ADMIN
Created by: KrishTS
Comments: 3
Category: RichTextEditor
Type: Feature Request
0

Hi Team,

Greetings! 

We recently bought your Tool for one our Windows Forms Project work in VS2019 (4.7.2 framework). 

There is a need for us to have Emojis inside the editable Textbox / RichTextEditor in Color.

For example, if we paste Emojis inside the text editor, it should retain the color of the Emoji as it is. 

Currently if we paste the Emoji inside the text editor, its only pasting the Emoji but losing it's color. 

How to retain the color of the Emoji inside the editable Textbox / RichTextEditor ? Is there any property or so we need to set?

The users of our application can paste any kind of Emoji (like inbuilt Windows10 Operating System Emojis etc.,) and there is no limitation for this. 

Kindly advice.

 

with regards,

Krish TS,

Senior Technical Programmer Analyst,

DXC.technology,

India. 

Unplanned
Last Updated: 22 Nov 2019 13:15 by ADMIN
When saving Form Fields in document defined with linearized PDF structure, it produces a document that fails to open in Edge.
Unplanned
Last Updated: 21 Nov 2019 14:32 by ADMIN

If you want to use Conditional Formatting via code (expression based formatting) you will see that it throws an exception if you set TRIM() condition.

ExpressionFormattingObject expressionCondition = new ExpressionFormattingObject(
expressionCondition.Expression = "TRIM(ContactName) = 'Maria Anders'";
expressionCondition.CellBackColor = Color.Aqua;
this.radGridView1.Columns["CustomerID"].ConditionalFormattingObjectList.Add(expressionCondition);

There is no exception if you use the same condition via "Conditional Formatting Rules Manager" form.

Unplanned
Last Updated: 21 Nov 2019 13:39 by ADMIN

Hi Progress Team,

 

I have encountered another issue in the RadPopupEditor control. For RadSpinEditor controls as well as for RadTextBox controls on the Popup container form, no value changed or validating/validation events are fired. For RadSpinEditor controls the ValueChanged event is fired when the spin buttons are used to change the value but when the user directly enters a value in the editor element and the control losts the focus (either by TAB or mouse click outside the control) the ValueChanged event is missing.

I have attached a small VS2017 project which illustrates the issue.

Thank you very much!

 

Regards,

 

J├╝rgen

Unplanned
Last Updated: 21 Nov 2019 12:44 by ADMIN

Hi Support,

 

please try set the WorkBook to RadSpreadsheet.

Best regards

Fritz

Declined
Last Updated: 21 Nov 2019 07:28 by ADMIN
Created by: Jorge
Comments: 1
Category: PdfViewer
Type: Feature Request
0
Implement the import of documents containing Type 3 fonts.
Unplanned
Last Updated: 19 Nov 2019 11:46 by ADMIN
Created by: Serena
Comments: 1
Category: Map
Type: Feature Request
2

Hi
We would like to use vector tiles in our offline mapping applications, like ones you can get here :- https://openmaptiles.com/downloads/dataset/osm/europe/great-britain/england/#5.03/52.946/-2.426

I think telerik only supports raster files right now.  Is there any plans to support vector files in the future?  Could it be added to the roadmap?

(I am not looking for a way to convert vector files into PNG/Bitmap/JPEG Image tiles in a custom provider thanks)

Unplanned
Last Updated: 19 Nov 2019 07:34 by ADMIN

In Word, for paragraphs in a list:

1. The bullet/number uses the value of the first line indent

2.1 The text on the first line is aligned according to the left indent when the left indent is smaller than the first line indent (the usual case).

2.2 If the first line indent is smaller than the left indent, the first line aligns with the rest of the text, using the value of the left indent property.

2.3 When there are tab stops, they are used for the position of the text. In RadRichTextBox, the text in the first line always aligns according to the FirstLine indent.

Also, tab stops can be used to position the text after the bullet/number.

Unplanned
Last Updated: 19 Nov 2019 06:48 by ADMIN
Add Paragraph property controlling  whether SpacingBefore / SpacingAfter is applied between paragraphs with the same style.

In MS Word, the corresponding option is controlled with "Don't add space between paragraphs of the same style" checkbox in the font properties dialog - and the paragraph spacing after will not be applied. 

In OOXML, it is described with the w:contextualSpacing element. We don't respect this property on import of such files, and the paragraph spacing is bigger.

Common use case for this feature is that when list is applied to multiple paragraphs, Paragraph List style is applied to the items, and this style has "Don't add space between paragraphs of the same style" applied, so the vertical spacing between the items is smaller.
Unplanned
Last Updated: 18 Nov 2019 11:03 by ADMIN
Created by: mali
Comments: 0
Category: Spreadsheet
Type: Feature Request
1
Currently if radSpreadsheet RightToLeft property is set to Yes, only the Formula Bar is affected; RadSpreadSheet and Status Bar are not.
Declined
Last Updated: 15 Nov 2019 13:47 by ADMIN
Created by: tstephens
Comments: 5
Category: DropDownList
Type: Bug Report
0

I am using Visual Studio 2019, version 16.3.1 and when using the DropDownList and running it in the VS debugger, the DropDownList get populated properly, but when you click the down arrow for the first time, the list drops down and you can scroll with the mouse wheel, but it will not allow you to select anything with the mouse.

If you click the down arrow to close the list, and click it again to reopen the list, it works properly - selecting the item chosen.

I have tried numerous property setting in attempt to narrow down if any of the properties set are causing it, but have been unsuccessful.

I have created several test projects with only 1 form and only the dropdownlist on the form and this happens reliably in every project I have tested within Visual Studio.

If I build the executable and run it directly, the DropDownList works properly as expected.

The DropDownList version is listed as 2019.3.917.40 in Visual Studio 2019 16.3.1.

I opened the project in JetBrains Rider on the same machine and everything works fine.

Declined
Last Updated: 14 Nov 2019 16:26 by ADMIN
Created by: Jorge
Comments: 1
Category: PdfViewer
Type: Bug Report
0

Hi

I'm using PDFViewer to display several documents in my application. Most of them are shown the right way, but there are others that appear "empty", or with some graphic elements but no text. I can see them perfectly with external third party viewers.

I've just downloaded and installed 2019.3.1022, but this issue remains.

I send some samples of PDF that are not showing.

Thank you in advance for your help.