Completed
Last Updated: 23 May 2019 13:19 by ADMIN
Release R2 2019 SP1 (LIB 2019.2.527)
To reproduce:
- Open the Property builder, add some nodes and disable them.
- There is no way to enable them at design time. 

Workaround. 
Disable the nodes at runtime.
Completed
Last Updated: 23 May 2019 13:19 by ADMIN
Release R2 2019 SP1 (LIB 2019.2.527)
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: RichTextEditor
Type: Bug Report
0
To reproduce: run the Demo application >> RichTextEditor >> First Look example and follow the steps illustrated in the attached gif file. 

1. First add a footnote in the text
2. Than select a part of the footnote text or all text and use the context menu to cut the text
3. Then,  paste the text in the document, it doesn't matter were.
4. Next step is to remove the footnote reference.
5.Then, scroll through the document and press the right mouse button to open the context menu.

The object release should have been called and the context menu is disposed. If so the error occurs.

Workaround:

this.radRichTextEditor1.MouseClick += radRichTextEditor1_MouseClick;

        private void radRichTextEditor1_MouseClick(object sender, MouseEventArgs e)
        {
            if (e.Button == System.Windows.Forms.MouseButtons.Right)
            {
                if (this.radRichTextEditor1.RichTextBoxElement.ContextMenu != null)
                {
                    FieldInfo fi = typeof(Telerik.WinControls.RichTextEditor.UI.ContextMenu).GetField("radDropDownMenu", BindingFlags.Instance | BindingFlags.NonPublic);
                    RadDropDownMenu dropdown = fi.GetValue(this.radRichTextEditor1.RichTextBoxElement.ContextMenu) as RadDropDownMenu;
                    if (dropdown.IsDisposed)
                    {
                        this.radRichTextEditor1.RichTextBoxElement.ContextMenu = new Telerik.WinControls.RichTextEditor.UI.ContextMenu();
                    }
                }
            }
        }
Completed
Last Updated: 23 May 2019 13:19 by ADMIN
Release R2 2019 SP1 (LIB 2019.2.527)
- Add RadRibbonForm
- Set the radRibbonBar1 RightToLeft property to YES at design time
- Close the designer and open it again -> another ribbon is showing up

Workaround: done set the ribbon's RightToLeft property, just set the RightToLeft property of the form itself.
Completed
Last Updated: 23 May 2019 13:19 by ADMIN
Release R2 2019 SP1 (LIB 2019.2.527)
Please refer to the attached gif file and sample project. When you hide the overflow button with the first pixel, although it is indicated as Visible, it is actually not shown.

Workaround: Timer timer = new Timer();

private void commandBarStrip_ItemOverflowed(object sender, EventArgs e)
{
    timer.Interval = 100;
    timer.Tick += timer_Tick;
    timer.Start();

}

private void timer_Tick(object sender, EventArgs e)
{
    timer.Tick -= timer_Tick;
    var commandBarStrip = this.radPdfViewerNavigator1.CommandBarElement.Rows[0].Strips[0];
    commandBarStrip.OverflowButton.Visibility = ElementVisibility.Visible;
    timer.Stop();
}
Completed
Last Updated: 23 May 2019 13:19 by ADMIN
Release R2 2019 SP1 (LIB 2019.2.527)
Open the attached project and show the designer. Open the tile's smart tag and try to enter a non numeric symbol for the column and press Enter.
Completed
Last Updated: 23 May 2019 13:19 by ADMIN
Release R2 2019 SP1 (LIB 2019.2.527)
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Form
Type: Bug Report
5
A possible workaround is to set the RadControl.EnableDpiScaling property to false.
static class Program
{
    /// <summary>
    /// The main entry point for the application.
    /// </summary>
    [STAThread]
    static void Main()
    {
        RadControl.EnableDpiScaling = false;

        Application.EnableVisualStyles();
        Application.SetCompatibleTextRenderingDefault(false);
        Application.Run(new RadForm1());
    }
}

Another workaround is to mark the application as DPI-aware: https://docs.telerik.com/devtools/winforms/telerik-presentation-framework/dpi-support
Completed
Last Updated: 22 May 2019 10:59 by ADMIN
Release R1 2018
Completed
Last Updated: 22 May 2019 06:51 by ADMIN
Release R2 2019
Implement Open Save Dialog, allowing theme customization.
Approved
Last Updated: 20 May 2019 10:48 by ADMIN
It would be good to have any indication that there are more button items in the backstage view. Currently, RadRibbonBar neither shows scrollbars, no overflow button
Approved
Last Updated: 17 May 2019 06:59 by ADMIN

https://docs.telerik.com/devtools/winforms/controls/gridview/filtering/setting-filters-programmatically-(composite-descriptors)

When creating a composite filter descriptor with a value that contains an array of enums, it generates an expression with IN, and an exception is thrown when adding it to the FilterDescriptors on a RadGridView control.

 

Exception Message:

{"The expression contains undefined function call In()."}

 

The expression value is: ([RandomPropertyName] IN (1,3,9) OR [RandomPropertyName] = 10)

 

We have recently upgraded from 2015.2.728.40 (where this worked) to the Feb. 2019 version, then today upgraded to the May 2019 version. The issue remains.

 

The project includes the following Telerik references:

 

Telerik.WinControls

Telerik.WinControls.GridView

Telerik.WinControls.PdfViewer

Telerik.WinControls.RadDock

Telerik.WinControls.RadMarkupEditor

Telerik.WinControls.UI

Telerik.Windows.Documents.Core

Telerik.Windows.Documents.Fixed

Telerik.Windows.Zip

TelerikCommon

 

Approved
Last Updated: 16 May 2019 13:33 by ADMIN

Please refer to the attached sample project and follow the steps from the gif file. The scrollbar needs to be in the middle.

Note: the issue can be reproduced without action list as well.

Declined
Last Updated: 16 May 2019 10:45 by ADMIN
Please run the attached sample project and follow the steps from the attached gif file to replicate the visual glitch.
Completed
Last Updated: 16 May 2019 08:57 by ADMIN
Release R1 2019
To reproduce: run the attached sample project. Click the Close button and then the Show button. You will notice that the list view is no longer available. 

Workaround: instead of using MDI, set the hostWindow.DockState = DockState.TabbedDocument; before showing the form.
Completed
Last Updated: 16 May 2019 08:57 by ADMIN
Release R1 2019
ADMIN
Created by: Dimitar
Comments: 0
Category: GridView
Type: Bug Report
1
To reproduce:
- Add a checkbox column and hide some of the cells.
- Change some values and then click on empty cell.
- Exception occurs in OnMouseDownLeft method (GridRowBeahvior class)

Workaround:

Hide the checkbox only.
Completed
Last Updated: 16 May 2019 08:56 by ADMIN
Release R1 2019
To reproduce:
1. Add a RadMultiColumnComboBox and populate it with data.
2. Set the DropDownStyle property of the control to DropDownList
3. Set the EditorControl.AllowSearchRow and the AutoSizeDropDownToBestFit properties to true .
4. When you open the drop down and try to use the search row (e.g. clicking over the arrow buttons), the drop down is closed.

Workaround: 
public partial class RadForm1 : Telerik.WinControls.UI.RadForm
{
    public RadForm1()
    {
        InitializeComponent();

        this.radMultiColumnComboBox1.EditorControl.AllowSearchRow = true;
        this.radMultiColumnComboBox1.DropDownStyle = Telerik.WinControls.RadDropDownStyle.DropDownList;
        this.radMultiColumnComboBox1.DropDownClosing += RadMultiColumnComboBox1_DropDownClosing;
    }

    private void RadMultiColumnComboBox1_DropDownClosing(object sender, RadPopupClosingEventArgs args)
    {
        Point position = this.radMultiColumnComboBox1.EditorControl.PointToClient(Cursor.Position);

        Telerik.WinControls.RadElement searchElement = this.radMultiColumnComboBox1.EditorControl.ElementTree.GetElementAtPoint(position);
        if (searchElement != null)
        {
            GridSearchCellElement parent = searchElement.FindAncestor<GridSearchCellElement>();
            if (parent != null)
            {
                args.Cancel = true;
            }
        }
    }
}
Completed
Last Updated: 16 May 2019 08:54 by ADMIN
Release R1 2019
Workaround: 

protected override void OnShown(EventArgs e)
{
    base.OnShown(e);

    LightVisualElement lve = this.radMultiColumnComboBox1.MultiColumnComboBoxElement.TextboxContentElement;
    RadArrowButtonElement arrow = this.radMultiColumnComboBox1.MultiColumnComboBoxElement.ArrowButton;
    lve.MaxSize = new Size(lve.Size.Width - arrow.Size.Width - (int)arrow.Border.Width, 0);
}
Completed
Last Updated: 16 May 2019 08:54 by ADMIN
Release R1 2019
Created by: Michael
Comments: 3
Category: Panel, CollapsiblePanel, Label, GroupBox
Type: Bug Report
0
The fix in 3Q18 removed the exposed Text property of the RadPanel control.  Setting the text to blank should not have removed the Text property from the control. 
Completed
Last Updated: 16 May 2019 08:53 by ADMIN
Release R1 2019
To reproduce:
- radSplitButton1.DefaultItem = radSplitButton1.Items[0];
- press and hold the action button
- the styles are not changed
Completed
Last Updated: 16 May 2019 08:53 by ADMIN
Release R1 2019
When you customize a theme for RadSplitButton, you are not able to change the color of the action button element when it is pressed and the drop down is not opened. 

Workaround:
this.radSplitButtonElement2.ActionButton.MouseDown+=ActionButton_MouseDown;
this.radSplitButtonElement2.ActionButton.MouseUp+=ActionButton_MouseUp;

private void ActionButton_MouseUp(object sender, MouseEventArgs e)
{
    this.radSplitButtonElement2.ActionButton.ButtonFillElement.ResetValue(LightVisualElement.BackColorProperty, ValueResetFlags.Local);
    this.radSplitButtonElement2.ActionButton.ButtonFillElement.ResetValue(LightVisualElement.GradientStyleProperty, ValueResetFlags.Local);
}

private void ActionButton_MouseDown(object sender, MouseEventArgs e)
{
    this.radSplitButtonElement2.ActionButton.ButtonFillElement.BackColor = Color.Red;
    this.radSplitButtonElement2.ActionButton.ButtonFillElement.GradientStyle = GradientStyles.Solid;
}
Declined
Last Updated: 16 May 2019 08:17 by ADMIN
1. Create a new project and setup hierarchy
2. Add a large number of rows as child rows to the last row at first level
3. Run the project and try to expand the last row