New
Last Updated: 20 Mar 2019 11:50 by Chris Ward

LineSeries lineSeries = new LineSeries();
lineSeries.DataPoints.Add(new CategoricalDataPoint(6, DateTime.Now));
lineSeries.DataPoints.Add(new CategoricalDataPoint(4, DateTime.Now.AddDays(1)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(7, DateTime.Now.AddDays(2)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(5, DateTime.Now.AddDays(3)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(3, DateTime.Now.AddDays(4)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(8, DateTime.Now.AddDays(5)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(7, DateTime.Now.AddDays(6)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(10, DateTime.Now.AddDays(7)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(4, DateTime.Now.AddDays(8)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(5, DateTime.Now.AddDays(9)));
lineSeries.DataPoints.Add(new CategoricalDataPoint(2, DateTime.Now.AddDays(10)));

DateTimeContinuousAxis continuousAxis = new DateTimeContinuousAxis();
continuousAxis.PlotMode = AxisPlotMode.OnTicks;
continuousAxis.LabelFormat = "{0:d}";
continuousAxis.ScaleBreakStyle = ScaleBreakStyle.Ragged;
lineSeries.HorizontalAxis = continuousAxis;
this.radChartView1.Series.Add(lineSeries);

DateTimeContinuousAxis horizontalAxis = radChartView1.Axes.Get<DateTimeContinuousAxis>(0);

AxisScaleBreak scaleBreakItem = new AxisScaleBreak();
scaleBreakItem.Name = "Item1";
scaleBreakItem.From = DateTime.Now.AddDays(3);
scaleBreakItem.To = DateTime.Now.AddDays(6);


New
Last Updated: 20 Mar 2019 11:32 by Chris Ward

How to reproduce:

LineSeries lineSeries = new LineSeries();
lineSeries.DataPoints.Add(new CategoricalDataPoint(6, "Harley"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(4, "White"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(7, "Smith"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(5, "Jones"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(3, "Marshall"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(8, "Stevens"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(7, "Brown"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(10, "Carter"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(4, "Bryant"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(5, "Mora"));
lineSeries.DataPoints.Add(new CategoricalDataPoint(2, "Roy"));

CategoricalAxis continuousAxis = new CategoricalAxis();
continuousAxis.PlotMode = AxisPlotMode.OnTicks;
continuousAxis.LabelFormat = "{0:d}";
continuousAxis.ScaleBreakStyle = ScaleBreakStyle.Ragged;
lineSeries.HorizontalAxis = continuousAxis;
this.radChartView1.Series.Add(lineSeries);

//setup plot band
CartesianPlotBandAnnotation annotation1 = new CartesianPlotBandAnnotation();
annotation1.Axis = this.radChartView1.Axes[0] as CartesianAxis;
annotation1.From = "Bryant";
annotation1.To = "Mora";
annotation1.BackColor = Color.FromArgb(100, Color.LightBlue);
annotation1.BorderColor = Color.Black;
annotation1.BorderWidth = 1;
this.radChartView1.Annotations.Add(annotation1);

AxisScaleBreak scaleBreakItem = new AxisScaleBreak();
scaleBreakItem.Name = "Item1";
scaleBreakItem.From = "Smith";
scaleBreakItem.To = "Brown";

horizontalAxis.ScaleBreakSize = 50;
horizontalAxis.ScaleBreaks.Add(scaleBreakItem);

Approved
Last Updated: 20 Mar 2019 09:44 by ADMIN
To reproduce: please run the attached sample project  and follow the steps in the gif file.  After some further testing you will notice that the tab items are re-positioned incorrectly when you click a certain tab. It jumps to another location.

Workaround: set the MultiLineItemFitMode property to None and specify the DocumentWindow.TabStripItem.Row property in order to arrange the tabs as you wish.
New
Last Updated: 20 Mar 2019 08:49 by n/a
Created by: n/a
Comments: 0
Category: UI for WinForms
Type: Bug Report
0

Hallo,

 

I was using "Controldefault" theme and I got such an error message on laptops and desctops with smaller resolution when pointing to the gridview control:

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at Telerik.WinControls.UI.GridHeaderRowBehavior.FindCellToResize(Point pt)
   at Telerik.WinControls.UI.GridHeaderRowBehavior.OnMouseMove(MouseEventArgs e)
   at Telerik.WinControls.UI.BaseGridBehavior.OnMouseMove(MouseEventArgs e)
   at Telerik.WinControls.UI.RadGridView.OnMouseMove(MouseEventArgs e)
   at System.Windows.Forms.Control.WmMouseMove(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at Telerik.WinControls.RadControl.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3190.0 built by: NET472REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
EMPLOYEES
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/EMPLOYEES.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3190.0 built by: NET472REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Telerik.WinControls.UI
    Assembly Version: 2019.1.219.40
    Win32 Version: 2019.1.219.40
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/Telerik.WinControls.UI.DLL
----------------------------------------
Telerik.WinControls
    Assembly Version: 2019.1.219.40
    Win32 Version: 2019.1.219.40
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/Telerik.WinControls.DLL
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3190.0 built by: NET472REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
TelerikCommon
    Assembly Version: 2019.1.219.40
    Win32 Version: 2019.1.219.40
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/TelerikCommon.DLL
----------------------------------------
Microsoft.GeneratedCode
    Assembly Version: 1.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Telerik.WinControls.Themes.TelerikMetro
    Assembly Version: 2019.1.219.40
    Win32 Version: 2019.1.219.40
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/Telerik.WinControls.Themes.TelerikMetro.DLL
----------------------------------------
Telerik.WinControls.Themes.Windows7
    Assembly Version: 2019.1.219.40
    Win32 Version: 2019.1.219.40
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/Telerik.WinControls.Themes.Windows7.DLL
----------------------------------------
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3160.0 built by: NET472REL1LAST_C
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
VariablesKsiop
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/VariablesKsiop.DLL
----------------------------------------
System.Transactions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_64/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
Telerik.WinControls.RadDock
    Assembly Version: 2019.1.219.40
    Win32 Version: 2019.1.219.40
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/Telerik.WinControls.RadDock.DLL
----------------------------------------
System.Numerics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
Telerik.WinControls.GridView
    Assembly Version: 2019.1.219.40
    Win32 Version: 2019.1.219.40
    CodeBase: file:///C:/Users/automation/AppData/Local/Apps/2.0/2L3Z29TM.MTW/YG48T3R8.OO2/empl..tion_d68bad146e85ae13_0001.0000_04e89f0b8ab6582c/Telerik.WinControls.GridView.DLL
----------------------------------------
Accessibility
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3056.0 built by: NET472REL1
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

At the same time on desctops with full HD everything was OK. I solved my problem selecting "Windows7" theme but I don't think it is a normal situation so I decided to inform You.

I use Visual Studio 2019 but I was unable to choose it from the list to finish the ticket.

Approved
Last Updated: 20 Mar 2019 08:49 by ADMIN
Created by: Valeriane
Comments: 1
Category: GanttView
Type: Feature Request
1

Hey !

I need to know if you plan the development of a new function :

When you are in the list of your tasks, i want to navigate with the keyboard. 

Im' Here :

 

And when i navigate in the list with the keyboard, i need to see the last column on the same task :

The focus is good but the horizontal scrollBar is on the same place and we can't the the all value of the cell.

Can we plan the improvment ? Or do you have a clean solution?

 

If you need more informations,

don't hesitate to contact me

Regards,

Val√©riane 

 

New
Last Updated: 19 Mar 2019 13:38 by ADMIN

After 1 million the decimal places of the labels are not correct, In your image. the labels on the horizontal axis go 999,992.50 - 999,995.00 - 999,997.5 -  1,000,000.00 - *1,000,003.00(should be 1,000,002.50) - 1,000,005.00 - *1,000,008.00(should be 1,000,007.5)

Approved
Last Updated: 19 Mar 2019 12:55 by ADMIN
To reproduce:

Add a RadSplitContainer with several SplitPanels and use the following code:
  this.radSplitContainer1.EnableCollapsing = true;
  this.radSplitContainer1.UseSplitterButtons = true;

If you run the project, you will notice that the next/previous buttons are displayed for manipulating the SplitPanel's collapsed/expanded state. If you click one of the next/previous buttons, the relevant SplitPanel will be collapsed and the splitter will remain visible. Thus, the user has the possibility to return the previous state of the SplitPanel. However, if you try to collapse the SplitPanel programmatically by setting the Collapsed property to true, the corresponding splitter will disapper.
Approved
Last Updated: 19 Mar 2019 10:29 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 2
Category: GridView
Type: Bug Report
4
To reproduce: use the following code snippet, save the layout and load it afterwards. You will notice that only the master and the first child template are successfully loaded.

public Form1()
{
    InitializeComponent();
    DataTable dt = new DataTable();
    dt.Columns.Add("Id", typeof(int));
    dt.Columns.Add("Name", typeof(string));
    for (int i = 0; i < 5; i++)
    {
        dt.Rows.Add(i, "Parent" + i);
    }

    this.radGridView1.MasterTemplate.DataSource = dt;
    this.radGridView1.MasterTemplate.AutoSizeColumnsMode = Telerik.WinControls.UI.GridViewAutoSizeColumnsMode.Fill;

    //child level 1
    GridViewTemplate template = new GridViewTemplate();
    template.DataSource = GetData(5, 20, 0, 5);
    template.AutoSizeColumnsMode = GridViewAutoSizeColumnsMode.Fill;
    radGridView1.MasterTemplate.Templates.Add(template);

    GridViewRelation relation = new GridViewRelation(radGridView1.MasterTemplate);
    relation.ChildTemplate = template;
    relation.RelationName = "ParentChild";
    relation.ParentColumnNames.Add("Id");
    relation.ChildColumnNames.Add("ParentId");
    radGridView1.Relations.Add(relation);

    //child level 2
    GridViewTemplate template2 = new GridViewTemplate();
    template2.DataSource = GetData(20, 40, 5, 20);
    template2.AutoSizeColumnsMode = GridViewAutoSizeColumnsMode.Fill;
    template.Templates.Add(template2);

    GridViewRelation relation2 = new GridViewRelation(template);
    relation2.ChildTemplate = template2;
    relation2.RelationName = "ParentChild";
    relation2.ParentColumnNames.Add("Id");
    relation2.ChildColumnNames.Add("ParentId");
    radGridView1.Relations.Add(relation2);

    //child level 3
    GridViewTemplate template3 = new GridViewTemplate();
    template3.DataSource = GetData(40, 100, 20, 40);
    template3.AutoSizeColumnsMode = GridViewAutoSizeColumnsMode.Fill;
    template2.Templates.Add(template3);

    GridViewRelation relation3 = new GridViewRelation(template2);
    relation3.ChildTemplate = template3;
    relation3.RelationName = "ParentChild";
    relation3.ParentColumnNames.Add("Id");
    relation3.ChildColumnNames.Add("ParentId");
    radGridView1.Relations.Add(relation3);

    //child level 4
    GridViewTemplate template4 = new GridViewTemplate();
    template4.DataSource = GetData(100, 200, 40, 100);
    template4.AutoSizeColumnsMode = GridViewAutoSizeColumnsMode.Fill;
    template3.Templates.Add(template4);

    GridViewRelation relation4 = new GridViewRelation(template3);
    relation4.ChildTemplate = template4;
    relation4.RelationName = "ParentChild";
    relation4.ParentColumnNames.Add("Id");
    relation4.ChildColumnNames.Add("ParentId");
    radGridView1.Relations.Add(relation4);
}

private object GetData(int from, int to, int parentFrom, int parentTo)
{
    DataTable dt = new DataTable();
    dt.Columns.Add("Id", typeof(int));
    dt.Columns.Add("Name", typeof(string));  
    dt.Columns.Add("ParentId", typeof(int));
    Random rand = new Random();
    for (int i = from; i < to; i++)
    {
        dt.Rows.Add(i, "Child" + i, rand.Next(parentFrom, parentTo));
    }
    return dt;
}

private void radButton1_Click(object sender, EventArgs e)
{
    string s = "default.xml";
    SaveFileDialog dialog = new SaveFileDialog();
    dialog.Filter = "xml files (*.xml)|*.xml|All files (*.*)|*.*";
    dialog.Title = "Select a xml file";
    if (dialog.ShowDialog() == DialogResult.OK)
    {
        s = dialog.FileName;
    }
    this.radGridView1.SaveLayout(s);
}

private void radButton2_Click(object sender, EventArgs e)
{
    string s = "default.xml";
    OpenFileDialog dialog = new OpenFileDialog();
    dialog.Filter = "xml files (*.xml)|*.xml|All files (*.*)|*.*";
    dialog.Title = "Select a xml file";
    if (dialog.ShowDialog() == DialogResult.OK)
    {
        s = dialog.FileName;
    }
    this.radGridView1.LoadLayout(s);
}


Workaround: grid templates for the inner levels are recreated after loading the layout. Their DataSource is null and the existing relations points to the old templates. Clear the relations and setup them again with the new  child template instances.
Approved
Last Updated: 19 Mar 2019 07:32 by ADMIN

To reproduce: 

- Add items with the same display member open the drop-down and select the second.

- Select another control on the form and then reopen the popup.

- The first item is selected.

Workaround: 

class MyMultiColumnComboBox : RadMultiColumnComboBox
{
    protected override void OnLostFocus(EventArgs e)
    {
        if (this.DropDownStyle == Telerik.WinControls.RadDropDownStyle.DropDownList)
        {
            return;
        }
        base.OnLostFocus(e);
    }
}

New
Last Updated: 19 Mar 2019 03:39 by ADMIN
Created by: n/a
Comments: 3
Category: UI for WinForms
Type: Feature Request
9
Add Office 2016 theme to the WinForms suite.
Approved
Last Updated: 19 Mar 2019 03:39 by ADMIN
Syntax highlighting editor that supports C# and intelisense
Approved
Last Updated: 18 Mar 2019 20:19 by Steve
Add an event that is raised when the user makes any change to an image. 
Declined
Last Updated: 18 Mar 2019 14:33 by ADMIN
If the lookup_value parameter and lookup_vector parameters refer cells containing text values, the function returns a Not available error ("#N/A").
Approved
Last Updated: 18 Mar 2019 13:12 by sebastien
When there are no data rows in the grid the new row is current and the message is not displayed. In some themes, the grid looks like there is a single row which is confusing to the end users. 

Workaround: 
radGridView1.CurrentRow = null;
Approved
Last Updated: 18 Mar 2019 11:29 by ADMIN
For some reason the last letters are dropping from headers and data.

Completed
Last Updated: 15 Mar 2019 21:39 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 6
Category: UI Framework
Type: Feature Request
9
Description: iterate through all the Telerik controls in an application and set a theme to each RadControl at design-time. 

Resolition: Set the RadForm or RadRibbonForm ThemeName, Then right click on it and press "Apply current form's theme to controls." menu 
Completed
Last Updated: 15 Mar 2019 17:40 by ADMIN
ADMIN
Created by: Peter
Comments: 0
Category: UI Framework
Type: Bug Report
2
RadOffice2007ScreenTipElement does not have all themes (except the ControlDefault Theme)
Approved
Last Updated: 14 Mar 2019 18:39 by ADMIN
Workaround:
 Private Sub RadPropertyGrid1_EditorRequired(sender As Object, e As PropertyGridEditorRequiredEventArgs) Handles RadPropertyGrid1.EditorRequired
     Dim te As PropertyGridTableElement = TryCast(sender, PropertyGridTableElement)
     If e.EditorType = GetType(PropertyGridSpinEditor) Then
         Dim editor As New CustomPropertyGridSpinEditor
         If editor IsNot Nothing AndAlso te IsNot Nothing Then
             Dim type As Type = RadPropertyGrid1.SelectedObject.[GetType]().GetProperty(e.Item.Name).PropertyType
             If type = GetType(System.Double) Then
                 DirectCast(editor.EditorElement, BaseSpinEditorElement).DecimalPlaces = 4
                 e.Editor = editor
             End If
         End If
     End If
 End Sub

 Public Class CustomPropertyGridSpinEditor
     Inherits PropertyGridSpinEditor
     Public Overrides Sub Initialize(owner As Object, value As Object)
         Dim decimalPlaces As Integer = Me.DecimalPlaces
         MyBase.Initialize(owner, value)

         Dim element As PropertyGridItemElement = TryCast(owner, PropertyGridItemElement)
         Dim item As PropertyGridItem = TryCast(element.Data, PropertyGridItem)
         Dim editedType As Type = item.PropertyType

        If ((editedType = GetType(Decimal) OrElse editedType = GetType(Double) OrElse editedType = GetType(Single)) AndAlso decimalPlaces <> 0) Then
         DirectCast(Me.EditorElement, BaseSpinEditorElement).DecimalPlaces = decimalPlaces
         Me.Value = value
       End If
     End Sub
 End Class
Completed
Scheduled for 2019.2.514
Last Updated: 14 Mar 2019 11:17 by Dimitar

To reproduce:

Open a large document and start scrolling fast. 

The pages a blank when scrolling and are rendered after scrolling stops.

New
Last Updated: 14 Mar 2019 09:54 by ADMIN
Created by: Stephen
Comments: 3
Category: Spreadsheet
Type: Feature Request
0

I have loaded an excel file into the spreadsheet control from our document database. When a user makes changes and clicks the save button I would like to handle a save process back to our document database of the file.

If a save function can be raised I can save to the document database

If a SavAs fucntion can be raised I can prompt the user to create a new version

 

Can the control have these two features added please?

1 2 3 4 5 6