Unplanned
Last Updated: 26 Feb 2020 07:18 by ADMIN

Populate a RadGridView with data, move the form to a monitor with greater than 100% DPI scaling. Save the layout and then load it again. You will notice that the columns' width is increased each time.

Workaround:

    Sub New()
        RadControl.EnableDpiScaling = False
        InitializeComponent()
    End Sub
In Development
Last Updated: 25 Feb 2020 09:28 by ADMIN

Please refer to the attached sample project and follow the steps illustrated in the provided gif file.

Workaround:

        public RadForm1()
        {
            InitializeComponent();

            this.radPageView1.SelectedPageChanged += radPageView1_SelectedPageChanged;
        }

        private void radPageView1_SelectedPageChanged(object sender, EventArgs e)
        {
            if (this.radPageView1.SelectedPage != this.radPageViewPage1)
            {
                SelectionMiniToolBar selectionMiniToolBar = this.radRichTextEditor1.RichTextBoxElement.SelectionMiniToolBar as SelectionMiniToolBar;
                if (selectionMiniToolBar != null)
                {
                    selectionMiniToolBar.Hide();
                }
            }
        }

In Development
Last Updated: 25 Feb 2020 09:27 by ADMIN

 public RadForm1() 
        {
            RadMapElement.VisualElementFactory = new MyMapVisualElementFactory();
            InitializeComponent();
        } 

 

public class MyMapVisualElementFactory : MapVisualElementFactory
    {
        public override MapCluster CreateCluster()
        {
            System.Diagnostics.Debug.WriteLine("FIRE!");
            return new MapCluster();
        }
    }
Unplanned
Last Updated: 17 Feb 2020 14:09 by ADMIN
Unplanned
Last Updated: 06 Feb 2020 14:01 by ADMIN
Please open the sample document in the Demo application and start scrolling. The attached gif file illustrates the obtained behavior. It is necessary to wait 2-3 seconds to scroll to the correct document's position.
Unplanned
Last Updated: 06 Feb 2020 13:20 by ADMIN
OverflowException is thrown while importing document using Helvetica font with custom encoding.
Unplanned
Last Updated: 05 Feb 2020 07:02 by ADMIN

Apply the Office2010Silver theme to your application since it has a good border indication for the focus in RadSpinEditor. 

Please run the attached project and click in the RadSpinEditor that is not in the RadPopupContainer. You will notice that when you move the mouse away that the border is highlighted in yellow showing that the control has complete focus. Now, click in the RadSpinEditor that is in the RadPopupContainer and move your mouse away. You will notice that the border is not highlighted in yellow indicating that it does not have focus. You can also see that it does not fire the GotFocus event. If you click closer to the border out of the "TextBox" area, the control border will stay yellow showing complete focus and fire off the GotFocus event. However, in this case, the caret is not displayed.

Workaround: handle the GotFocus/LostFocus events for the SpinElement.TextBoxItem and apply the desired border for indicating the focus.
Unplanned
Last Updated: 31 Jan 2020 07:29 by ADMIN
The document styles are not respected because of wrongly imported custom style name after copy-paste from MS Word and exported to HTML.

Workaround: avoid using styles with braces in their name.
Unplanned
Last Updated: 31 Jan 2020 07:21 by ADMIN
When copy a modified Heading from Word document and paste it into a RichTextEditor the modified styles are not correctly imported.
Completed
Last Updated: 21 Jan 2020 12:52 by ADMIN
Release R1 2020 SP1 (LIB 2020_1_127)
Created by: Ricardo
Comments: 1
Category: UI for WinForms
Type: Bug Report
1

To reproduce:

 radMaskedEditBox1.MaskedEditBoxElement.ContextMenuEnabled = true;

Workaround:

public RadForm1()
{
    InitializeComponent();
    radMaskedEditBox1.MaskType = Telerik.WinControls.UI.MaskType.Standard;
    radMaskedEditBox1.Mask = "9999999999";
    radMaskedEditBox1.MaskedEditBoxElement.ContextMenuEnabled = true;
    radMaskedEditBox1.MaskedEditBoxElement.ContextMenu = BuildContextMenu();
}
private RadContextMenu BuildContextMenu()
{
    var contextMenu = new RadContextMenu();


    if (contextMenu == null)
    {
        contextMenu = new RadContextMenu();
    }

    if (contextMenu.Items.Count == 0)
    {
        RadMenuItem menuItem = new Telerik.WinControls.UI.RadMenuItem("Cut");
        menuItem.Name = "Cut";
        contextMenu.Items.Add(menuItem);
        menuItem.Click += new System.EventHandler(this.ContextMenuMenuItem_Click);

        menuItem = new Telerik.WinControls.UI.RadMenuItem("Test");
        menuItem.Name = "Copy";
        contextMenu.Items.Add(menuItem);
        menuItem.Click += new System.EventHandler(this.ContextMenuMenuItem_Click);

        menuItem = new Telerik.WinControls.UI.RadMenuItem("Paste");
        menuItem.Name = "Paste";
        contextMenu.Items.Add(menuItem);
        menuItem.Click += new System.EventHandler(this.ContextMenuMenuItem_Click);

        menuItem = new Telerik.WinControls.UI.RadMenuItem("Delete");
        menuItem.Name = "Delete";
        contextMenu.Items.Add(menuItem);
        menuItem.Click += new System.EventHandler(this.ContextMenuMenuItem_Click);

        menuItem = new Telerik.WinControls.UI.RadMenuItem("Select All");
        menuItem.Name = "Select All";
        contextMenu.Items.Add(menuItem);
        menuItem.Click += new System.EventHandler(this.ContextMenuMenuItem_Click);
    }
    return contextMenu;
}
void ContextMenuMenuItem_Click(object sender, EventArgs e)
{
    switch (((Telerik.WinControls.UI.RadMenuItem)(sender)).Name.ToUpper())
    {
        case "UNDO":
            //this.radMaskedEditBox1.MaskedEditBoxElement.TextBoxItem.;
            break;
        case "CUT":
            this.radMaskedEditBox1.MaskedEditBoxElement.TextBoxItem.Cut();
            break;
        case "COPY":
            this.radMaskedEditBox1.MaskedEditBoxElement.TextBoxItem.Copy();
            break;
        case "PASTE":
            this.radMaskedEditBox1.MaskedEditBoxElement.TextBoxItem.Paste();
            if (!this.radMaskedEditBox1.MaskedEditBoxElement.Provider.Validate(this.Text))
            {
                this.radMaskedEditBox1.MaskedEditBoxElement.TextBoxItem.TextBoxControl.Undo();
            }

            break;
        case "DELETE":
            this.radMaskedEditBox1.MaskedEditBoxElement.TextBoxItem.Clear();
            break;
        case "SELECT ALL":
            this.radMaskedEditBox1.MaskedEditBoxElement.TextBoxItem.SelectAll();
            break;
        default:
            break;
    }
}


Unplanned
Last Updated: 21 Jan 2020 11:54 by ADMIN

Please refer to the attached if file. You will notice that the converter wizard will skip the designer file if the form's file end with "Settings".

Workaround: change the file name to skip ending with "Settings"

Completed
Last Updated: 25 Dec 2019 10:26 by ADMIN
Workaround:

            this.radChat1.ChatElement.InputTextBox.TextBoxItem.TextBoxControl.Multiline = true;
            this.radChat1.ChatElement.InputTextBox.ButtonsStack.Children.Remove(this.radChat1.ChatElement.ShowToolbarButtonElement);
            this.radChat1.ChatElement.InputTextBox.ButtonsStack.Children.Remove(this.radChat1.ChatElement.SendButtonElement);
            StackLayoutElement stack = new StackLayoutElement();
            stack.MinSize = new Size(0, 60);
            this.radChat1.ChatElement.InputTextBox.Parent.Children.Add(stack);
            this.radChat1.ChatElement.InputTextBox.Parent.Children.Remove(this.radChat1.ChatElement.InputTextBox);
            stack.StretchHorizontally = true;
            stack.Orientation = Orientation.Horizontal;
            stack.Children.Add(this.radChat1.ChatElement.InputTextBox);
            stack.Children.Add(this.radChat1.ChatElement.ShowToolbarButtonElement);
            stack.Children.Add(this.radChat1.ChatElement.SendButtonElement);
            this.radChat1.ChatElement.ShowToolbarButtonElement.StretchHorizontally = false;
            this.radChat1.ChatElement.SendButtonElement.StretchHorizontally = false;
Declined
Last Updated: 18 Dec 2019 12:46 by ADMIN
Created by: Smisha
Comments: 1
Category: UI for WinForms
Type: Bug Report
0

https://feedback.telerik.com/winforms/1372559-add-radautocompletebox-mode-disabling-the-selection-of-already-selected-items?_ga=2.157346746.1205807184.1576647468-1851167977.1571202604

I have tried this code. It removes the item from list if we enter a letter first, then key down. But if we select an item then just press key down same item will be shown in the list.

 

Unplanned
Last Updated: 12 Nov 2019 14:58 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: UI for WinForms
Type: Bug Report
3
To reproduce: add a RadLabel and change its cursor to Hand.

 this.radLabel1.Cursor = Cursors.Hand;

The PixelatedHandCursor.png shows the poor quality of the cursor which should be improved.

Workaround: https://stackoverflow.com/questions/6016995/un-antialiased-hand-cursor-in-windows-forms-apps/6017174#6017174

    public class LinkLabelEx : RadLabel
    {
        private const int WM_SETCURSOR = 0x0020;
        private const int IDC_HAND = 32649;

        [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)]
        private static extern IntPtr LoadCursor(IntPtr hInstance, int lpCursorName);

        [DllImport("user32.dll", CharSet = CharSet.Auto)]
        private static extern IntPtr SetCursor(IntPtr hCursor);

        protected override void WndProc(ref Message m)
        {
            if (m.Msg == WM_SETCURSOR)
            {
                // Set the cursor to use the system hand cursor
                SetCursor(LoadCursor(IntPtr.Zero, IDC_HAND));

                // Indicate that the message has been handled
                m.Result = IntPtr.Zero;
                return;
            }

            base.WndProc(ref m);
        }
    }

The ImprovedCursorRendering.png  shows the improved cursor. 
Completed
Last Updated: 22 Oct 2019 05:30 by ADMIN
Release R3 2019 SP1
Created by: Rajesh
Comments: 8
Category: UI for WinForms
Type: Bug Report
0

i am not able to run the Quickstart examples

when i opened the solution in visual studio and run it, its throwing the error application its throwing error as "FileNotFoundException: Could not find file 'C:\Users\rpeddala\AppData\Roaming\Telerik\WinForms\Examples\Analytics\config.xml"as shown below

 

Completed
Last Updated: 27 Aug 2019 12:15 by ADMIN
Release R3 2019

 The scroll in the SuggestedActionsElement cannot be made visible, one can scroll only with the mouse. Introduce a property so there is an indication that additional items are available.

In addition, the CreateChatElement in RadChat class should be made virtual. 

Unplanned
Last Updated: 19 Aug 2019 05:00 by ADMIN
Changing the preferred width of columns to percentages from the Table Properties dialog actually sets them in pixels.

Steps to reproduce:
1) Insert a table

2) select table column property and set preferred width to 20%

3) press "next column" button and set preferred width to 20% 

4) Go to previous columns 

Expected: Column width is set in percentage.

Actual: Some (or all) columns have width set in pixels.
Completed
Last Updated: 25 Jul 2019 14:47 by ADMIN
Release R3 2019 (LIB 2019.2.729)

https://docs.telerik.com/devtools/winforms/controls/gridview/filtering/setting-filters-programmatically-(composite-descriptors)

When creating a composite filter descriptor with a value that contains an array of enums, it generates an expression with IN, and an exception is thrown when adding it to the FilterDescriptors on a RadGridView control.

 

Exception Message:

{"The expression contains undefined function call In()."}

 

The expression value is: ([RandomPropertyName] IN (1,3,9) OR [RandomPropertyName] = 10)

 

We have recently upgraded from 2015.2.728.40 (where this worked) to the Feb. 2019 version, then today upgraded to the May 2019 version. The issue remains.

 

The project includes the following Telerik references:

 

Telerik.WinControls

Telerik.WinControls.GridView

Telerik.WinControls.PdfViewer

Telerik.WinControls.RadDock

Telerik.WinControls.RadMarkupEditor

Telerik.WinControls.UI

Telerik.Windows.Documents.Core

Telerik.Windows.Documents.Fixed

Telerik.Windows.Zip

TelerikCommon

 

Declined
Last Updated: 25 Jul 2019 12:30 by ADMIN

You can use the following code snippet and follow the steps from the provided gif file:

        public RadForm1()
        {
            InitializeComponent();

            DataTable dt = new DataTable();
            dt.Columns.Add("Id");
            for (int i = 0; i < 100; i++)
            {
                dt.Rows.Add(i);
            }

            this.radMultiColumnComboBox1.DisplayMember = "Id";
            this.radMultiColumnComboBox1.ValueMember = "Id";
            this.radMultiColumnComboBox1.DataSource = dt;
            this.radMultiColumnComboBox1.SelectedIndex = -1;

            this.radMultiColumnComboBox1.SelectedIndexChanged += radMultiColumnComboBox1_SelectedIndexChanged;
        }

        private void radMultiColumnComboBox1_SelectedIndexChanged(object sender, EventArgs e)
        {
            RadMessageBox.Show("You just selected index " + this.radMultiColumnComboBox1.SelectedIndex);
        }

Completed
Last Updated: 22 Jul 2019 14:50 by ADMIN
Release R3 2019 (LIB 2019.2.729)

Workaround:

private void RadDropDownButton1_DropDownOpening(object sender, EventArgs e)
{
    var args = e as RadPopupOpeningEventArgs;
    var popupSize = radDropDownButton1.DropDownButtonElement.DropDownMenu.Size;
    var x = args.CustomLocation.X - (popupSize.Width - radDropDownButton1.Width);
    args.CustomLocation = new Point(x, args.CustomLocation.Y);
}

1 2 3 4 5 6