Completed
Last Updated: 28 May 2019 15:59 by ADMIN
Release R2 2019 SP1 (LIB 2019.2.603)
Use attached to reproduce. Move the splitter with the mouse and you will notice that is position is not correct when the mouse is released
Approved
Last Updated: 19 Mar 2019 12:55 by ADMIN
To reproduce:

Add a RadSplitContainer with several SplitPanels and use the following code:
  this.radSplitContainer1.EnableCollapsing = true;
  this.radSplitContainer1.UseSplitterButtons = true;

If you run the project, you will notice that the next/previous buttons are displayed for manipulating the SplitPanel's collapsed/expanded state. If you click one of the next/previous buttons, the relevant SplitPanel will be collapsed and the splitter will remain visible. Thus, the user has the possibility to return the previous state of the SplitPanel. However, if you try to collapse the SplitPanel programmatically by setting the Collapsed property to true, the corresponding splitter will disapper.
Approved
Last Updated: 04 Dec 2017 12:56 by ADMIN
The Modifiers property should be visible in the properties window when a SplitPanel instance is selected. 

Workaround:

Manually change the modifier in the Designer.cs file to protected.
  
Completed
Last Updated: 28 Jun 2016 10:23 by ADMIN
When you cut-copy RadSplitContainer containing two SplitPanels from one form to another, only the RadSplitContainer is pasted, but the SplitPanels are missing.
Completed
Last Updated: 02 May 2019 16:28 by ADMIN
Release R2 2019
When you try to move the splitter on 125% DPI and release the mouse, the splitter is placed to another place.
Approved
Last Updated: 16 May 2019 05:07 by ADMIN
To reproduce:
- Use relative sizing and save the RelativeRatio.
- Set the same value after restarting the application.
- The panel size is not the same. 

Workaround:
Use absolute size. 
Approved
Last Updated: 30 Mar 2016 13:12 by ADMIN
ADMIN
Created by: Julian Benkov
Comments: 0
Category: SplitContainer
Type: Bug Report
2
If the AutoScroll of RadSplitContainer is true and I scroll the container a little, don’t work the resizes of the panels.

sample code:

public Form1()
    {
        InitializeComponent();
 
        RadSplitContainer radSplitContainer1 = new RadSplitContainer()
        {
            Dock = DockStyle.Fill,
            AutoScroll = true
        };
 
        this.Controls.Add(radSplitContainer1);
 
        for (int i = 0; i < 10; i++)
        {
            var panel = new SplitPanel();
            panel.SizeInfo.SizeMode = SplitPanelSizeMode.Absolute;
            panel.SizeInfo.AbsoluteSize = new Size(100, 0);
            radSplitContainer1.SplitPanels.Add(panel);
        }
    }
Completed
Last Updated: 12 Jun 2014 06:22 by ADMIN
SplitPanel - there is no property Name in Visual Studio designer.
Approved
Last Updated: 30 Mar 2016 13:11 by ADMIN
To reproduce:
- Add button to a split panel
- Set button Text property to "Button &X"
- Add a event handler for the button
- Start the application and press the "x" key

To work around this issue instead of using mnemonics you can set shortcuts like this:
radButton.ButtonElement.Shortcuts.Add(new RadShortcut(Keys.Alt, Keys.X));

Also you can set mnemonic like underline like this:
radButton.Text = "<html>Button <u>X";

Completed
Last Updated: 26 Nov 2015 11:00 by ADMIN
ADMIN
Created by: Martin Vasilev
Comments: 0
Category: SplitContainer
Type: Bug Report
1
In design time when trying to copy-paste a RadSplitContainer, which contains a couple panels, it throws exception.

Steps to reproduce:
Add a RadSplitContainer to a form or user control.
Add a couple of panels to the container using the designer.
Press Ctrl+A to select all the controls on the form or user control.
Press Ctrl+C to copy them to the clipboard.
Create a new form or user control (this step isn't strictly necessary, but helps explain the issue).
Paste the controls on the clipboard into the new form or user control using Ctrl+V
Completed
Last Updated: 16 Nov 2012 05:31 by ADMIN
Applying Settings to the RadSplitContainer >> SplitContainerElement >> SplitterFill element affect only the first Splitter instance in the RadSplitContainer.
Approved
Last Updated: 30 Mar 2016 13:11 by ADMIN
To reproduce:
-add RadSplitContainer (horizontal) and add one left and one right split panel
-add two RadButtons to collapse and show one of the panels
private void radButton1_Click(object sender, EventArgs e)
{
    this.splitPanel1.Collapsed = true;
}

private void radButton2_Click(object sender, EventArgs e)
{          
    this.splitPanel1.Visible = true;
}
-click the first button to collapse the left panel; as a result the second panel fills the entire container size
-click the second button to show again the left panel; as a result the panels overlap each other
Completed
Last Updated: 06 Feb 2015 13:37 by ADMIN
ADMIN
Created by: Nikolay
Comments: 0
Category: SplitContainer
Type: Bug Report
1
When you drop a RadSplitContainer in a RadDock ToolWindow, RadSplitContainer loses important options from its SmartTag's ActionMenu.
Similar behavior is obtained when you drag a RadSplitContainer from the ToolBox and drop it onto an empty RadDock.
Completed
Last Updated: 05 Jun 2014 07:08 by ADMIN
Let's have a RadSplitContainer on a form. This RadSplitContainer should contain two SplitPanels and one splitter. Change the color of the splitter using the Edit UI Elements dialog. Run the project and you will get IndexOutOfRangeException. However, if you cut and paste the designer code in the form_load, it will work correctly.
Completed
Last Updated: 01 Nov 2017 13:06 by ADMIN
Please refer to the attached sample project. Double click the middle splitter in the horizontal split container.

Workaround: manually collapse the desired split panel:

private void Form1_Load(object sender, EventArgs e)
{
    this.radSplitContainer3.PanelCollapsing += radSplitContainer3_PanelCollapsing;
    foreach (SplitterElement s in this.radSplitContainer3.Splitters)
    {
        s.DoubleClick += s_DoubleClick;
    }
}

private void s_DoubleClick(object sender, EventArgs e)
{
    SplitterElement s = sender as SplitterElement;
    ((SplitPanel)s.RightNode).Collapsed = true;
}
Completed
Last Updated: 07 Feb 2017 06:48 by ADMIN
Unable to cast object of type 'System.EventArgs' to type 'System.Windows.Forms.MouseEventArgs'.

Workaround: use the SpliPanel.Collapsed property to control whether the split panel is expanded or collapsed.
Approved
Last Updated: 19 Jun 2017 11:00 by ADMIN
To reproduce: add a RadSplitContainer with 3 identical SplitPanels. The left panel needs to be initially collapsed. That is why we use the introduced public API (MoveSplitter method). When the form is shown and you try to expand the left (yellow) panel, you will notice that the splitter is not restored to the correct position. Please refer to the attached gif file.

This must be handled for Vertical and Horizontal orientation!!!

Workaround:

Private Sub RadForm1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    AddHandler Me.RadSplitContainer1.MouseDown, AddressOf SplitContainerMouseDown
End Sub
Private Sub SplitContainerMouseDown(sender As Object, e As MouseEventArgs)
    Dim clickedElement = Me.RadSplitContainer1.ElementTree.GetElementAtPoint(e.Location)
    If TypeOf clickedElement Is SplitterElement Or TypeOf (clickedElement.Parent) Is SplitterElementLayout Then
        RadSplitContainer1.RestoreSplitterPosition(Me.RadSplitContainer1.Splitters(0))
        RemoveHandler Me.RadSplitContainer1.MouseDown, AddressOf SplitContainerMouseDown
    End If
End Sub
Completed
Last Updated: 02 Nov 2015 12:20 by ADMIN
To reproduce:
- Set the splitter size to 40.
- Drag the splitter without releasing the mouse.
- The mouse pointer is in the beginning of the splitter, but it should be in its center.

Completed
Last Updated: 27 Oct 2017 10:02 by ADMIN
How to reproduce:  check the attached video

Workaround: Only split panels can be added to RadSplitContainer,  so add a panel first to the control before using the document outline
Approved
Last Updated: 30 Mar 2016 13:12 by ADMIN
I have three split panels and when the auto scroll is enabled some lines appear in the split panel.

The issue can be reproduced with RadPanel as well.

Workaround: http://www.telerik.com/forums/problem-with-auto-scroll#ygV1vwyA40KZ4KoD28AhvQ


1 2