Approved
Last Updated: 26 Feb 2019 21:09 by Bryan Cho
Changing the DataSource or scrolling are slow.

Create a grid with more than 20 columns and add 5K rows for example. Maximize the form and try to scroll with mouse wheel. You will notice that the scrolling performance is worse compared to the normal state of the form with less visible visual elements.

Workaround: this.radGridView1.EnableFastScrolling = true; and use the scrollbar's thumb

Second workaround: use paging:  https://docs.telerik.com/devtools/winforms/gridview/paging/overview Thus, you will display as many rows as possible to display on the screen per page. Instead of scrolling, you will navigate through pages.
Completed
Last Updated: 23 Apr 2014 12:56 by ADMIN
ADMIN
Created by: Alexander
Comments: 0
Category: GridView
Type: Bug Report
15
The HeaderText of the RadGridView columns is not properly serialized in the resource file for the corresponding language.
Completed
Last Updated: 20 Aug 2015 14:43 by ADMIN
Wrapping text in ColumnsGroupViewDefinition does not affect the size of the cells.
Completed
Last Updated: 11 Feb 2014 13:46 by ADMIN
ADMIN
Created by: Jack
Comments: 0
Category: GridView
Type: Bug Report
11
1. Create a new project with RadGridView
2. Setup a hierarchy with a large number of rows
3. Apply grouping and expand all child views
4. Run the project and try to scroll
Completed
Last Updated: 12 Jun 2014 06:57 by Jesse Dyck
ADMIN
Created by: Nikolay
Comments: 2
Category: GridView
Type: Bug Report
11
RadGridView should support indexed full-text search out of the box.
Completed
Last Updated: 11 Feb 2014 13:48 by ADMIN
1. Drag a RadGridView to a form and dock it to fill the form.
2. Create and set a ColumnGroupsViewDefinition to the grid
3. Add data and run the project.
4. Resize the form and you will see that grid view layout would not look properly.
Also if your resize a column group only the first column in the group is resized while all others retain their widths.

Work around:
void radGridView1_SizeChanged(object sender, EventArgs e)
{
    this.InvalidateGridLayout();
}
 
private void InvalidateGridLayout()
{
    this.bllGridView1.TableElement.ViewElement.RowLayout.InvalidateLayout();
    this.bllGridView1.TableElement.InvalidateMeasure(true);
    this.bllGridView1.TableElement.UpdateLayout();
}
Completed
Last Updated: 23 Apr 2014 12:56 by ADMIN
ADMIN
Created by: Alexander
Comments: 0
Category: GridView
Type: Bug Report
9
Sorting of RadGridView slows down its performance when the control is used in self-reference hierarchy mode.
Approved
Last Updated: 29 Mar 2019 16:16 by ADMIN
When UseCompatibleTextRendering property is set to false, the data cells overlaps the row header cells when horizontal scrolling is performed.
Approved
Last Updated: 30 Mar 2016 07:52 by Jesse Dyck
The Property Builder of RadGridView makes unnecessary Designer modifications, causing checkouts in source controlled files. For example, if you have a gridViewCheckBoxColumn1 stored in the designer file, you open the Property Builder and close it (no matter if you make any changes or not), the gridViewCheckBoxColumn1 is removed in favour of gridViewCheckBoxColumn2 that is automatically created.
Completed
Last Updated: 23 Mar 2015 15:48 by Eric
Saving a form with RadGridView produces the following error at design time: Code generation for property "PrintCellPaint" failed.

We isolated the following steps which reproduce the issue: 
1. Drag and drop RadPageView on the form. Add 2 pages. 
2. Add a RadGridView to one of the pages. 
3. Saved and opened the form. 
4. Select the other page and save the form. 
 case #1: If the grid is empty - Code generation for property 'PrintCellPaint' failed. Error was: 'Object does not match type.'
 case #2: If the grid is data bound - Code generation for property 'PropertyChanging' failed. Error was: 'Object does not match type.'
The same errors if you use RadDock with tabbed documents.
Approved
Last Updated: 05 Oct 2018 12:54 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: GridView
Type: Bug Report
8
To reproduce:
1.Add a RadGridView with one column.
2.Select the form and in the Properties window, set the form's Localizable property to true.
3.Specify the column's HeaderText for the default language.
4.Set the form's Language property to French (France).
5.Specify the column's HeaderText for  French (France).
6.Set the CurrentUICulture before the InitializeComponent method to "fr-FR". If you run the application, the column is localized as expected.
7.If you get back to the designer and change the form's Language property back to Default you will notice that the column's HeaderText disappears.

Workaround: set the HeaderText programmatically according to the current language.
Completed
Last Updated: 09 Jan 2013 06:09 by ADMIN
ADMIN
Created by: Julian Benkov
Comments: 0
Category: GridView
Type: Bug Report
8
On the form load, the grid is loaded with three parts. Upon refresh, the buttons call a method which generates the same data table but with some additional parts - to simulate a data refresh.

Button 1 - Refresh Data
- This button calls a method that operates the same as detailed initially in the ticket; it utilizes the BeginUpdate/EndUpdate methods around the updating of the grid. This replicates the scenario I initially described where message boxes are fired stating "Column 'xxx' does not belong to table 'fileSystem'.".

Button 2 - Refresh Data 2
- This button calls a method that is modified as suggested - the BeginUpdate/EndUpdate methods have been removed and the DataSource is set directly.

Button 3 - Clear Data
- This button is meant to simply clear the data from the grid. It only attempts to set the DataSource property to Nothing.
Completed
Last Updated: 29 Jun 2015 10:44 by ADMIN
Stack Overflow Exception in the CellValueNeeded Event after sorting when RowIndex, ColumnIndex arguments is used
Completed
Last Updated: 13 Feb 2014 13:15 by Jesse Dyck
ADMIN
Created by: Julian Benkov
Comments: 1
Category: GridView
Type: Bug Report
7
steps to reproduce: 

1- Apply filter in a date column by choosing Between. 

2- Leave default settings (change dates) and confirm 

3- Save layout 

4- Close the form 

5- Open the form and load the layout 

forum: http://www.telerik.com/community/forums/winforms/gridview/save-load-layout-issue.aspx#1475412 
Completed
Last Updated: 03 Mar 2014 08:13 by Jesse Dyck
ADMIN
Created by: Julian Benkov
Comments: 1
Category: GridView
Type: Bug Report
7
Description: Just use the button x times to show an additional form with a RadGridView Control on it. RadGridView is not releasing the complete allocated memory. JustTrace shows an increasing number of Telerik.WinControls.RadPropertyValue instances. 

Resolution: Not a memory leak. When a form is shown with the ShowDialog method, it should be explicitly disposed. If the form was shown using the Show method, the Dispose method does not need to be called explicitly. It will be called automatically when the form is closed. Source: MSDN http://msdn.microsoft.com/en-us/library/aw58wzka%28v=vs.110%29.aspx
Completed
Last Updated: 23 Apr 2014 12:56 by ADMIN
ADMIN
Created by: Alexander
Comments: 0
Category: GridView
Type: Bug Report
6
Scrolling with the mouse wheel and the keyboard could be improved in some scenarios.
Completed
Last Updated: 15 Jul 2019 08:33 by ADMIN
Release R3 2019 (LIB 2019.2.722)
Created by: Daniel
Comments: 1
Category: GridView
Type: Bug Report
6

Steps to reproduce:

  1. Click column header to sort.
  2. Click button which to export to Excel.
  3. The rows return to unsorted.
  4. Scroll down slightly and scroll back up and the sort is restored.

This happens after calling RunExport.

I attached a gif and a sample project.

Completed
Last Updated: 23 Oct 2015 09:26 by ADMIN
To reproduce:

1.Add a grid and populate it with data.
2.Apply a theme to the entire application, e.g. TelerikMetro
3.Activate the grid editor.
4.Change the theme to VisualStudio2012Dark or HigthContrastBlack.
5.Activate the grid editor again. You will notice that editor's back color remains white and you are not able to read the text.

Note: if you apply initially VisualStudio2012Dark theme, editor's back color is correct. Please refer to the attached gif file, illustrating this incorrect style.

Workaround:

private void radGridView1_CellEditorInitialized(object sender, Telerik.WinControls.UI.GridViewCellEventArgs e)
{
    BaseGridEditor gridEditor = e.ActiveEditor as BaseGridEditor;
    if (gridEditor != null)
    {
        RadTextBoxElement el = gridEditor.OwnerElement.FindDescendant<RadTextBoxElement>();
        if (el != null)
        {
            if (ThemeResolutionService.ApplicationThemeName == "VisualStudio2012Dark")
            {
                el.BackColor = Color.Black;
            }
        }
    }
}

Completed
Last Updated: 19 Jun 2017 12:30 by ADMIN
To reproduce:
- Add a grid to a PageView and add the pageView to a dock window at run time.
- The grid should not be visible.
- Set your DPI setting to 150%

Workaround:
class MyViewDefinition : TableViewDefinition
{
    public override IRowView CreateViewUIElement(GridViewInfo viewInfo)
    {
        return new MyTableElement();
    }
}
class MyTableElement : GridTableElement
{
    public override void DpiScaleChanged(SizeF scaleFactor)
    {
        if (this.ViewTemplate != null)
        {
            base.DpiScaleChanged(scaleFactor);
        }

    }
    protected override Type ThemeEffectiveType
    {
        get { return typeof(GridTableElement); }
    }
}

//use the above definition like this:

 radGridView1.ViewDefinition = new MyViewDefinition();
Completed
Last Updated: 24 Aug 2012 00:29 by ADMIN
To reproduce:
Add radGridView to a form
open the property builder
add GridViewCommandColumn
go to advanced settings
click the ellipse button of the Header Image property
1 2 3 4 5 6