Please refer to the attached sample project and gif file which illustrates the exact steps and obtained result.
Workaround: set the DropDownStyle property to DropDown.
Please refer to the attached if file. You will notice that the converter wizard will skip the designer file if the form's file end with "Settings".
Workaround: change the file name to skip ending with "Settings"
Please refer to the attached sample project and the follow the steps in the gif file.
Workaround: scroll to the top and then to the bottom again to update the scrollbar's range
when I select the column chooser multiple times via context menu, the column chooser dialog scales multiple times.
Reproduced here with the Telerik sample application. 150 % dpi scaling.
The behavior of split button makes me confused when I use split button collapsing the split panel. It locates in different position when I restore the split button by double-click. What's weirder is that double-click will make no effect when the split button located on the edge. I don't like these default behaviours.
1. Do you know how to overwrite the default behaviour of split button?
2. Is there a virtual method or some event I can reimplement?
3. I want to collapse the right panel to the right side, and restore it to the initial location, and just these to behaviours. How can I do it?
I'm just starting with RadGridView and trying to figure out how to create a combobox column inside my RadGridView. I've added a column that is of type GridViewComboBoxColumn. I've created a BindingSource that Contains the values for the combobox. I can't figure out how to set the datasource property of the Column to use that BindingSource. Google search says to set the datasource property but when I'm going through the "Open Properties Builder" and I select my combobox column I don't see that property listed under advanced for the column.
hello, a few days ago in support ticket they gave me this as a solution to move to the last message of the RadChat, but it does not work, if I upload the item and then add a message it does not point me to the last one but the scroll remains in The position I leave, what I need is to know what event or how to make your RadChat the last element.
I have a RadRichTextEditor. When it contains multiple lines a vertical scroll bar is shown. When I keep writing and press the enter key to insert a carriage return, it starts a new paragraph but the cursor disappears.
When I press return at the bottom of this control I want the cursor to be kept in sight. See the screenshots I have attached. You can see that after the return you can only see the very top of the cursor, the rest is hidden. You have to actually manually scroll down to get it into view.
When you start typing, this cursor comes into view, but I want it to be in view even if you just press return. Is there a way to get it to do this?
This seems to be the default behavior of this control, as I have created a new application to show this, which doesn't contain any of the formatting which my actual application does.
I have integration radscheduler and radganttview.
Dim ds as new DataSource
Dim dvAppointments As New DataView
Dim appointmentMappingInfo As New AppointmentMappingInfo()
Dim SchedSource As New SchedulerBindingDataSource()
appointmentMappingInfo.Mappings.Add(New SchedulerMapping("Kontrahent", "pln_kntakronim"))
appointmentMappingInfo.Start = "pln_start"
appointmentMappingInfo.End = "pln_stop"
appointmentMappingInfo.Location = "pln_nr"
appointmentMappingInfo.ResourceId = "pln_zamgidnumer"
appointmentMappingInfo.Description = "pln_opis"
appointmentMappingInfo.Resources = ""
appointmentMappingInfo.Location = "pln_nrzam"
appointmentMappingInfo.Summary = "pln_twrkod"
appointmentMappingInfo.StatusId = "pln_status"
dvAppointments.Table = ds.Tables("PlanowanieTamborow")
SchedSource.EventProvider.Mapping = appointmentMappingInfo
bsPlanowanie.DataSource = dvAppointments 'BindingSource
SchedSource.EventProvider.DataSource = bsPlanowanie
RadScheduler1.DataSource = SchedSource
RadGanttView1.DataProvider = New GanttViewIntegrationProvider(RadScheduler1)
Dim reader As System.Data.SqlClient.SqlDataReader = comm.ExecuteReader
If I refresh the Radscheduler then RadGanttView doesn't refresh
Radscheduleris working properly
Set one of the monitors to use 125% DPI scaling. Start the attached project on a monitor with 100% DPI scaling - the form is expected to be with size 400,400. Move the form to the monitor with 125% DPI scaling. You are expecting the form's size to be 500,500, but it is 507,521. Please refer to the screenshots.
Override the RadForm.ScaleControl method as follows:
Protected Overrides Sub ScaleControl(factor As SizeF, specified As BoundsSpecified) Dim initialSize As Size = Me.Size MyBase.ScaleControl(factor, specified) Me.Size = TelerikDpiHelper.ScaleSize(initialSize, factor) End Sub
The UI behaivor of drag selection shows inconsistent behavior between WinForm vs WPF/Excel.
When you drag some cells for selection and keep dragging to the right (getting the out scope), the control scrolls to the right.
This behavior is common in Winform/WPF/Excel.
When you drag backward (to the left), WPF controls scroll back and so is Excel, while Winform controls does not scroll
Same thing for top and bottom scroll. Winform Spreadsheet control does not scroll. It may scrolls only to the right.
Another Caveat I see meanwhile is that when you scroll backwards until the row area, the pointer become row-resize pointer, or so
If you keep mouse moving around, it sometimes makes a horizontal line (possibly a guide for row resize?)
The issue in this case is that, it does not remove itself. the horizontal line stays there. It is not very annoying (as it is thin horizontal line) but is still a bug.
create a empty Winform app, with the RadSpreadsheet Control, and Run
Drag from row C3 and to the right (around the scrollbar) the control scrolls to the right (this is not quite smooth though..)
Scroll right to AZ3 say, and drag backward back to C3, this now does not scroll back.
Same for top and bottom.
Do the same for WPF, it now works as expected
Do the same for MS Excel, it now works as expected.
ColorDialog on higher dpi has some small problems.
1. Size of dialog is larger so there is large gap in right and bottom part.
2. Selected radio button black circle is not in center of larger circle.
If you want to use Conditional Formatting via code (expression based formatting) you will see that it throws an exception if you set TRIM() condition.
ExpressionFormattingObject expressionCondition = new ExpressionFormattingObject(
expressionCondition.Expression = "TRIM(ContactName) = 'Maria Anders'";
expressionCondition.CellBackColor = Color.Aqua;
There is no exception if you use the same condition via "Conditional Formatting Rules Manager" form.
please try set the WorkBook to RadSpreadsheet.
In Word, for paragraphs in a list:
1. The bullet/number uses the value of the first line indent
2.1 The text on the first line is aligned according to the left indent when the left indent is smaller than the first line indent (the usual case).
2.2 If the first line indent is smaller than the left indent, the first line aligns with the rest of the text, using the value of the left indent property.
2.3 When there are tab stops, they are used for the position of the text. In RadRichTextBox, the text in the first line always aligns according to the FirstLine indent.
Also, tab stops can be used to position the text after the bullet/number.
It seems that the GridViewColumnGroup.MinHeight has a big influence on the height of the filter cell.
this.radGridView1.AutoSizeRows = true;
look at video attached,
I'm using app theme resolution windows 7, but in RadRibbonForm the caption draw very awfull. This happens since always I use Telerik, but now I got some time to report to you.
ThemeResolutionService.ApplicationThemeName = "Windows7";
What I do?
When you have RadPageView within a RadDock only the selected page is visible and its content is shown. When you select another page it is blank.
Workaround:For Each page As RadPageViewPage In Me.rpvMain.Pages