Completed
Last Updated: 25 Jun 2018 06:48 by Dimitar
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Scheduler/Reminder
Type: Feature Request
1
By design, the month view in RadScheduler stacks the appointments for a certain day considering the start time of the appointments and their duration. Internally, it uses MonthViewEventsComparer which would be great to be replaceable somehow. 
Declined
Last Updated: 21 Jun 2018 13:54 by ADMIN
Created by: Bart
Comments: 1
Category: Scheduler/Reminder
Type: Feature Request
0
It is possible to schedule multiple appointments in the same time period. In some scenario's this should be avoided. When the agenda can change from outside the scheduler, sometimes conflics will apear when the resource is not visible on the scheduler. It would be nice to have a list of all the conflicted appointments

Completed
Last Updated: 28 Nov 2017 06:45 by ADMIN
This feature is required for OpenEdge scenarios. 

A common case is that the resource_id field is stored as an integer field in your DataSource. But RadScheduler needs EventId type. You can have a look at the Appointment.ResourceId property which expects EventId value, not an integer. It is necessary to use a SchedulerMapping in this case and convert the integer value to EventId used by RadScheduler and convert the EventId to an integer used by your DataSource. This conversion is performed by the ConvertToDataSource and ConvertToScheduler callbacks. It is responsible for the proper conversion of the integer resource_id value coming from the DataSource to the RadScheduler's EventId. Additional information for the SchedulerMapping is available here: http://docs.telerik.com/devtools/winforms/scheduler/data-binding/scheduler-mapping

In C#, it is just necessary to specify the name of the callback which will handle the conversion but it seems to be a problem in ABL. It is required to have events.
Approved
Last Updated: 20 Nov 2017 12:21 by ADMIN
By default, each Appointment has two properties: ResourceId and ResourceIds. Usually, the ResourceId is used when you have only a single resource for the appointment. In case you have multiple resources for an appointment the ResourceIds collection is used. However, the current implementation of the EditAppointmentDialog uses a RadDropDownList for the resource selection. Thus, the user is not allowed to create an appointment and assign two resources to it. It can be achieved only programmatically. This is a common scenario when creating a meeting and you have at least two participants. A possible solution would be to replace the resources RadDropDownList with a RadCheckedDropDownList. Thus, the user will be able to select multiple resources.
Approved
Last Updated: 19 Jan 2018 13:27 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Scheduler/Reminder
Type: Feature Request
1
To reproduce:

1. Add a RadScheduler and associate a RadSchedulerNavigator to it.
2. Change the culture to  "fa-IR". When running the application you will notice that the time range in the navigator is not displayed correctly considering the culture of the associate RadScheduler.

Note: you can set the SchedulerNavigatorElement.DateFormat property to  "dd dddd". Thus, the time range should be displayed in a similar way as the header cells in RadScheduler.

Workaround: you can controls what to be displayed in the navigator by the SchedulerNavigatorElement.DateLabel.Text property.

            this.radScheduler1.Culture = new System.Globalization.CultureInfo("fa-IR");

            string start = this.radScheduler1.ActiveView.StartDate.ToString(this.radSchedulerNavigator1.SchedulerNavigatorElement.DateFormat, this.radScheduler1.Culture);
            string end = this.radScheduler1.ActiveView.EndDate.ToString(this.radSchedulerNavigator1.SchedulerNavigatorElement.DateFormat, this.radScheduler1.Culture);
            this.radSchedulerNavigator1.SchedulerNavigatorElement.DateLabel.Text = start + " - " + end;
Approved
Last Updated: 20 Nov 2017 12:57 by ADMIN
Approved
Last Updated: 14 Aug 2017 11:03 by ADMIN
Currently the range starts from the start date of the first appointment an ends with the end date of the last appointment within the range. One should be able to show that there are no appointments within the specified range (start from the DateStartRange).

 
Approved
Last Updated: 27 Dec 2016 15:37 by Scott
The resulting behavior should be similar to having all day appointments in the control with the view having its ShowAllDayArea property set to false. Currently when printed the all day appointments are drawn in the all day area.
Completed
Last Updated: 14 Dec 2016 14:48 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Scheduler/Reminder
Type: Feature Request
2
Currently, the control lacks such support and when this culture is used an exception is thrown. To reproduce use the sample project and press the navigator's Next button several times.

StackTrace:

System.ArgumentOutOfRangeException occurred

  HResult=-2146233086
  Message=Year, Month, and Day parameters describe an un-representable DateTime.
  Source=mscorlib
  StackTrace:
       at System.DateTime.DateToTicks(Int32 year, Int32 month, Int32 day)
       at Telerik.WinControls.UI.DateHelper.GetEndOfMonth(DateTime date, DateTimeFormatInfo dateTimeFormat)
       at Telerik.WinControls.UI.DateHelper.GetMonthDisplayWeeks(DateTime date, DateTimeFormatInfo dateTimeFormat)
       at Telerik.WinControls.UI.SchedulerNavigatorElement.NavigateBackwards()
       at Telerik.WinControls.UI.SchedulerNavigatorElement.OnNavigateBackwards(Object sender, EventArgs e)
       at Telerik.WinControls.UI.SchedulerNavigatorElement.NavigateButton_Click(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at Telerik.WinControls.RadElement.OnClick(EventArgs e)
       at Telerik.WinControls.UI.RadButtonItem.OnClick(EventArgs e)
       at Telerik.WinControls.UI.RadButtonElement.OnClick(EventArgs e)
       at Telerik.WinControls.RadElement.DoClick(EventArgs e)
       at Telerik.WinControls.RadElement.RaiseBubbleEvent(RadElement sender, RoutedEventArgs args)
       at Telerik.WinControls.RadItem.RaiseBubbleEvent(RadElement sender, RoutedEventArgs args)
       at Telerik.WinControls.RadElement.RaiseRoutedEvent(RadElement sender, RoutedEventArgs args)
       at Telerik.WinControls.RadElement.RaiseBubbleEvent(RadElement sender, RoutedEventArgs args)
       at Telerik.WinControls.RadItem.RaiseBubbleEvent(RadElement sender, RoutedEventArgs args)
       at Telerik.WinControls.RadElement.RaiseRoutedEvent(RadElement sender, RoutedEventArgs args)
       at Telerik.WinControls.RadElement.DoMouseUp(MouseEventArgs e)
       at Telerik.WinControls.ComponentInputBehavior.OnMouseUp(MouseEventArgs e)
       at Telerik.WinControls.RadControl.OnMouseUp(MouseEventArgs e)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at Telerik.WinControls.RadControl.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at SchedulerShamsiTest.Program.Main() in c:\Users\dyordano\Desktop\RadSchedulerFixPersianLocale (1)\SchedulerShamsiTest\Program.cs:line 19
  InnerException: 
Approved
Last Updated: 15 Aug 2017 10:08 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Scheduler/Reminder
Type: Feature Request
1
In Outlook, when the appontment height should be smaller than the height needed to accommodate 1 line of text, the appointment status size is being changed instead.
Approved
Last Updated: 15 Aug 2017 10:02 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Scheduler/Reminder
Type: Feature Request
3

			
Declined
Last Updated: 10 Apr 2015 11:33 by ADMIN
Created by: Aron
Comments: 1
Category: Scheduler/Reminder
Type: Feature Request
1
Add AgendaView to the winforms RadScheduler.
(Seeing as the view exists in the ASP version of the RadScheduler).
Approved
Last Updated: 15 Aug 2017 10:02 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 2
Category: Scheduler/Reminder
Type: Feature Request
2

			
Approved
Last Updated: 15 Aug 2017 10:02 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Scheduler/Reminder
Type: Feature Request
3
It would be nice if the RadScheduler allows dragging of multiple selected appointments and change the events'  start time in correspondence with the active appointment offset time.
Declined
Last Updated: 13 Jan 2015 15:45 by ADMIN
Hi

When using group view we need the reminders to be shown for a selected (set programitically) resource. At the moment it shows reminders for all resources that have appointments that need reminding. In our case we have users who have scheduler open in group view showing multiple resources but would only like to be reminded about appointments that are for the user using the system.
Approved
Last Updated: 31 Aug 2017 08:54 by Longnd
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 4
Category: Scheduler/Reminder
Type: Feature Request
4
This request is to add Working hours range of the view, which will style the cells as working and non working. In addition, add a property ShowWorkingHours while will determine whether non-working hours are visible or not.

Or perhaps for the sake of consistency, we can have API as in the day view:
dayView.RangeFactor = ScaleRange.QuarterHour
dayView.RulerStartScale = 9
dayView.RulerStartScaleMinutes = 30
dayView.RulerEndScale = 14
dayView.RulerEndScaleMinutes = 45
Approved
Last Updated: 15 Aug 2017 10:02 by ADMIN
ADD. RadScheduler - add the ability to change  the culture of the generated print document.
Approved
Last Updated: 15 Aug 2017 10:02 by Nicola
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 2
Category: Scheduler/Reminder
Type: Feature Request
5

			
Approved
Last Updated: 15 Aug 2017 10:02 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: Scheduler/Reminder
Type: Feature Request
3

			
1 2 3 4 5 6