Approved
Last Updated: 30 Jul 2019 08:35 by ADMIN
Created by: n/a
Comments: 1
Category: VirtualGrid
Type: Bug Report
1

Hi,


I have a problem with the expansion of the last row.

After Row Expanding and Row Collapsing the last or second last row, the last row is not visible because it seems that there I some kind of lock on the scrollbar : it doesn’t scroll down neither with the mouse wheel nor with the button so it is not possible to move on the last row.

If instead you scroll up and then down the row became visible again.

In the attached example project.

 

Regards

 

 

 

Approved
Last Updated: 17 Jan 2019 10:52 by ADMIN
RadVirtualGrid shold automatically adjust the height of the visible cells/rows only. When you perform scrolling horizontally or vertically, the respective scrollbar will be adjusted. The scrollbar may shrink or enlarge considering the currently displayed data. Have in mind that when you have a horizontal scrollbar, the row's height will be calculated according to the content of the visible cells on the row. If you scroll horizontally and some of the cells on the row get hidden and others get visible, the row's height should be adjusted according to the content. Initially, this behavior may be confusing for the users, however since data is loaded on demand in RadVirtualGrid, you need to autosize the rows on demand as well. 
Approved
Last Updated: 16 May 2019 05:55 by ADMIN

Hello, we have found another small bug of the RadVirtualGrid control.

When paging is enabled on child view, one of the component of the paging panel overlap whit is parent.

I attach source code and screenshot.

 

Thanks in advance.

 

Completed
Last Updated: 14 Feb 2019 16:55 by ADMIN
Completed
Last Updated: 14 Feb 2019 16:42 by ADMIN

When you setup a hierarchical RadVirtualGrid and set the UseScrollbarsInHierarchy property to false and use VirtualGridAutoSizeColumnsMode.Fill for the child template, you expect that the column's width is calculated according to the total width of the respective template. Hence, if you shrink or enlarge the grid, the columns will shrink/enlarge respectively. However, if you double click the resize cursor between the column headers you will notice that the best-fit action is performed over the column and its width is adjusted. However, the VirtualGridAutoSizeColumnsMode.Fill setting is not respected and you either can't see all the columns, or you obtain some empty space if the column doesn't need much space. 

Completed
Last Updated: 18 Jan 2019 15:14 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 1
Category: VirtualGrid
Type: Bug Report
1
To reproduce: open the Demo application >> VirtualGrid >> First Look example. Follow the steps illustrated in the attached gif file. You will notice that when you expand a row, the "-" sign is show for a second and then it is returned to "+" although the row is still expanded. 

Workaround:
            this.radVirtualGrid1.CellFormatting += radVirtualGrid1_CellFormatting;
            this.radVirtualGrid1.RowExpanded += radVirtualGrid1_RowExpanded;
            this.radVirtualGrid1.RowCollapsed += radVirtualGrid1_RowCollapsed;



        private void radVirtualGrid1_RowCollapsed(object sender, VirtualGridRowExpandedEventArgs e)
        {
            if (expandedState.ContainsKey(e.RowIndex))
            {
                expandedState[e.RowIndex] = !expandedState[e.RowIndex];
            }
           
            this.radVirtualGrid1.TableElement.SynchronizeRow(e.RowIndex, true);
        }

        Dictionary<int, bool> expandedState = new Dictionary<int, bool>();

        private void radVirtualGrid1_RowExpanded(object sender, VirtualGridRowExpandedEventArgs e)
        {
            if (!expandedState.ContainsKey(e.RowIndex))
            {
                expandedState.Add(e.RowIndex, false);
            }
            expandedState[e.RowIndex] = !expandedState[e.RowIndex];
            this.radVirtualGrid1.TableElement.SynchronizeRow(e.RowIndex, true);
        }

        private void radVirtualGrid1_CellFormatting(object sender, Telerik.WinControls.UI.VirtualGridCellElementEventArgs e)
        {
            VirtualGridIndentCellElement indentCell = e.CellElement as VirtualGridIndentCellElement;
            if (indentCell != null)
            {
                if (expandedState.ContainsKey(e.CellElement.RowIndex) && expandedState[e.CellElement.RowIndex] == true)
                {
                    indentCell.ExpanderItem.SignImage = Properties.Resources.chevron_up;
                }
                else
                {
                    indentCell.ExpanderItem.SignImage = Properties.Resources.chevron_down;
                }
            }

        }
Approved
Last Updated: 16 May 2019 05:12 by ADMIN
To reproduce: please refer to the attached gif file. The CellClick is not fired for the child rows that belong to columns that exceed the width of the parent template.

Workaround: set the AutoSizeColumnsMode property to Fill.

this.radVirtualGrid1.AutoSizeColumnsMode = Telerik.WinControls.UI.VirtualGridAutoSizeColumnsMode.Fill;
Completed
Last Updated: 03 Dec 2018 14:52 by Dimitar
To reproduce: if you set the TableElement.RowHeight property, it affects the header row as well, but not all cells. As a result the header row overlaps the new row.

Workaround: set the TableElement.HeaderRowHeight as well.

  this.radVirtualGrid1.TableElement.HeaderRowHeight = 50;
In Development
Last Updated: 01 Nov 2018 09:56 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: VirtualGrid
Type: Bug Report
1
It is difficult to replicate the issue and it is not always reproduced. When using the splitter between columns[1] and columns[2]  to resize column[1] I found out that releasing the mouse button doesn't cause the splitter to be released, even when clicking on the grid. It seems to work ok once or twice but once it fails then keeps failing.

Workaround:
        private void radVirtualGrid1_MouseUp(object sender, MouseEventArgs e)
        {
            if (e.Button == System.Windows.Forms.MouseButtons.Left)
            {
                this.radVirtualGrid1.Cursor = Cursors.Default;
            }
        }
Completed
Last Updated: 11 Oct 2018 12:24 by Dimitar
To reproduce: use the following code snippet. Navigate to the last page and press the button to clear the rows. You will notice that the current page index remains 10 although no rows are available in the grid

        public RadForm1()
        {
            InitializeComponent();

            this.radVirtualGrid1.RowCount = 1000;
            this.radVirtualGrid1.ColumnCount = 5;
            this.radVirtualGrid1.CellValueNeeded += radVirtualGrid1_CellValueNeeded;

            this.radVirtualGrid1.EnablePaging = true;
        }

        private void radVirtualGrid1_CellValueNeeded(object sender, Telerik.WinControls.UI.VirtualGridCellValueNeededEventArgs e)
        {
            e.Value = "Item" + e.RowIndex + "." + e.ColumnIndex;
        }

        private void radButton1_Click(object sender, EventArgs e)
        {
            this.radVirtualGrid1.RowCount = 0;
            this.radVirtualGrid1.ColumnCount = 5; 
        }

Workaround:  this.radVirtualGrid1.VirtualGridElement.FindDescendant<VirtualGridPagingPanelElement>().PageNumberTextBox.Text = "1";
Completed
Last Updated: 14 Sep 2018 13:40 by Dimitar
Approved
Last Updated: 26 Jun 2018 08:37 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: VirtualGrid
Type: Bug Report
5
To reproduce: open the VirtualGrid >> First Look example in QSF and follow the steps:

1) I have a virtual grid which has both vertical and horizontal scroll bars.

2) Scroll to the very bottom of the grid

3) Select the last row

4) Scroll all the way to the right

At this moment the selected row disappears from the view. While scrolling horizontally the vertical scrollbar jumps several rows above although it seems scrolled to the bottom. 
Completed
Last Updated: 21 Jun 2018 13:59 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: VirtualGrid
Type: Bug Report
1
To reproduce: run the sample project and try to resize some of the columns.

RadVirtualGrid has 10 columns and 500 rows. You will notice the laggind while resizing the columns. Actually the number of the visible cells remains the same after the column's resizing. However, the CellValueNeeded event keeps firing.
Approved
Last Updated: 31 Jan 2018 07:43 by ADMIN
ADMIN
Created by: Telerik Admin
Comments: 1
Category: VirtualGrid
Type: Feature Request
2
I miss grouping functionality in VirtualGrid. In my opinion, the following process would be conceivable:
1. user interaction triggers an event - e. g. GroupChanged (similar to FilterChanged).
2. This event determines all available groups and returns them to the VirtualGrid. 
3. if the user expand a group > a second event is fired - and returns all matching data rows.
Completed
Last Updated: 19 Dec 2017 15:23 by ADMIN
The attached gif file illustrates how to reproduce the problem with the Demo application. 
Completed
Last Updated: 30 Oct 2017 06:48 by ADMIN
Use attached to reproduce (just start it and press enter).

Workaround:

class MyBehavior : VirtualGridInputBehavior
{
    public MyBehavior(RadVirtualGridElement element) : base(element)
    {

    }
    protected override bool HandleEnterKey(KeyEventArgs keys)
    {
        if (this.GridElement.CurrentCell != null)
        {
            return base.HandleEnterKey(keys);
        }
        return false; 
    }
}


radVirtualGrid1.VirtualGridElement.InputBehavior = new MyBehavior(radVirtualGrid1.VirtualGridElement);
Approved
Last Updated: 14 Aug 2017 12:02 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: VirtualGrid
Type: Feature Request
1
Scenario to cover: the user tries to filter the grid not with each entered symbol but when the value in the filter cell is committed (Enter key is pressed) and the editor is closed. The CellValuePushed event is fired only for data cells and the FilterChanged event is fired with each keystroke but not when the editor is closed. A similar scenario is valid for the new row. There is no suitable event for capturing when a certain cell is updated in the new row as well.
Approved
Last Updated: 14 Aug 2017 13:38 by Saji
Using RadVirtualGrid, I have a requirement for showing hierarchical levels of data. The parent level and child levels share the SAME column headers.  I am utilizing the QueryHasChildRows event of the grid to set the number of rows for each hierarchical level. In that event I set a few properties to control how a child view is rendered as below:

            else if (e.ViewInfo.HierarchyLevel > 0)
            {
                var items = ((IList<AllocStructNode>)e.ViewInfo.ParentViewInfo.Tag)[e.ViewInfo.ParentRowIndex];
                if (items.Children != null && items.Children.Count > 0)
                {
                    e.ViewInfo.Tag = items.Children;
                    e.ViewInfo.RowCount = items.Children.Count;
                    e.ViewInfo.HeaderRowHeight = 0;
                    e.ViewInfo.ShowHeaderRow = false;
                    e.ViewInfo.FilterRowHeight = 0;
                    e.ViewInfo.ShowFilterRow = false;
                    e.ViewInfo.Padding = new Padding(0);
                    e.ViewInfo.HorizontalScrollState = ScrollState.AlwaysHide;
                }
            }


When a new level is rendered, a new demarcated section of child table element with its own horizontal scrolling displayed. When the parent is horizontally scrolled, the child level doesn't scroll (not synchronized). Similarly, when the child is horizontally scrolled, the parent does not scroll as well.

Workaround:
See attached project.
Completed
Last Updated: 24 Jan 2018 11:08 by ADMIN
To reproduce:
- Enable the paging and add 1000 rows.
- Press Ctrl + End
- An exception is thrown.

Workaround:

radVirtualGrid1.VirtualGridElement.InputBehavior = new MyBehavior(radVirtualGrid1.VirtualGridElement);

class MyBehavior : VirtualGridInputBehavior
{
    public MyBehavior(RadVirtualGridElement element) : base(element)
    {

    }
    protected override bool HandleEndKey(KeyEventArgs keys)
    {
        this.GridElement.PageIndex = this.GridElement.TotalPages - 1;
      
        return true;
        //return base.HandleEndKey(keys);
    }
}
Completed
Last Updated: 15 Aug 2017 10:54 by ADMIN
ADMIN
Created by: Dess | Tech Support Engineer, Sr.
Comments: 0
Category: VirtualGrid
Type: Bug Report
1
Workaround:
this.radVirtualGrid1.RowCount += 100;
this.radVirtualGrid1.TableElement.PagingPanelElement.UpdateView();
1 2 3