Pending Review
Last Updated: 19 Aug 2019 10:29 by Kim

The FulentDarkTheme sets a transparent background which results in a slow resizing. 

Workaround:

this.TabbedFormControl.RootElement.BackColor = Color.Black;

Approved
Last Updated: 19 Aug 2019 05:00 by ADMIN
Changing the preferred width of columns to percentages from the Table Properties dialog actually sets them in pixels.

Steps to reproduce:
1) Insert a table

2) select table column property and set preferred width to 20%

3) press "next column" button and set preferred width to 20% 

4) Go to previous columns 

Expected: Column width is set in percentage.

Actual: Some (or all) columns have width set in pixels.
Completed
Last Updated: 19 Aug 2019 21:18 by Greg
Release R3 2019 (LIB 2019.2.819)

Please run the attached sample project and follow the steps illustrated in the attached gif file. The following exception occurs:

System.ArgumentException
  HResult=0x80070057
  Message=Rectangle '{X=0,Y=35,Width=156.3333,Height=0}' cannot have a width or height equal to 0.
  Source=System.Drawing
  StackTrace:
   at System.Drawing.Drawing2D.LinearGradientBrush..ctor(RectangleF rect, Color color1, Color color2, Single angle, Boolean isAngleScaleable)
   at System.Drawing.Drawing2D.LinearGradientBrush..ctor(RectangleF rect, Color color1, Color color2, Single angle)
   at Telerik.WinControls.UI.Gauges.LinearGaugeBrushFactory.CreateBrush(GaugeVisualElement owner, GaugeBrushType type)
   at Telerik.WinControls.UI.Gauges.LinearGaugeBar.Paint(Graphics graphics, Rectangle boundingRectangle)
   at Telerik.WinControls.UI.Gauges.LinearGaugeBar.PaintElement(IGraphics graphics, Single angle, SizeF scale)
   at Telerik.WinControls.RadElement.DoOwnPaint(IGraphics graphics, Single angle, SizeF scale)
   at Telerik.WinControls.RadElement.Paint(IGraphics graphics, Rectangle clipRectangle, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadItem.PaintOverride(IGraphics screenRadGraphics, Rectangle clipRectangle, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadElement.PaintChild(RadElement child, IGraphics graphics, Rectangle clipRectange, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadElement.PaintChildren(IGraphics graphics, Rectangle clipRectange, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.VisualElement.PaintChildren(IGraphics graphics, Rectangle clipRectange, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadElement.Paint(IGraphics graphics, Rectangle clipRectangle, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadItem.PaintOverride(IGraphics screenRadGraphics, Rectangle clipRectangle, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadElement.PaintChild(RadElement child, IGraphics graphics, Rectangle clipRectange, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadElement.PaintChildren(IGraphics graphics, Rectangle clipRectange, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.VisualElement.PaintChildren(IGraphics graphics, Rectangle clipRectange, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadElement.Paint(IGraphics graphics, Rectangle clipRectangle, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadItem.PaintOverride(IGraphics screenRadGraphics, Rectangle clipRectangle, Single angle, SizeF scale, Boolean useRelativeTransformation)
   at Telerik.WinControls.RadControl.OnPaint(PaintEventArgs e)
   at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer)
   at System.Windows.Forms.Control.WmPaint(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at Telerik.WinControls.RadControl.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

IMPORTANT: If both colors are changed at design time and you set the Value of RadLinearGauge to 0, this will provoke a similar error leading Visual Studio to crash.

Workaround: specify a minimum width/height for the gauge:

this.radLinearGauge1.MinimumSize = new Size(1, (int)this.linearGaugeBar1.Offset+1);

 

 

Approved
Last Updated: 14 Aug 2019 07:25 by ADMIN
Created by: Tel
Comments: 1
Category: GridView
Type: Feature Request
1
Hello, i am using the GridViewSpreadStreamExport to export a gridview with parent and child rows.
Everithing works fine but is it possible to set the parent row to collapsed, if there are child rows?
Declined
Last Updated: 16 Aug 2019 15:22 by ADMIN
Created by: Stephen
Comments: 5
Category: RichTextEditor
Type: Feature Request
0

Dear Sir/Madam,

 

I have a docx document and want to display it in flow layoutmode. It works normally except it cannot show header at the beginning of the document and footer at the end of the document. Please help.

My code is similar as follows (Rte is the RadRichTextEditor control):

 

DocumentFormatProviderBase provider = new DocxFormatProvider();

Rte.SuspendLayout();

Rte.Document = provider.Import([Docx in byte array]);

Rte.RichTextBoxElement.BackColor = Color.White;

Telerik.WinControls.RichTextEditor.UI.DocumentWebLayoutPresenter presenter = (Telerik.WinControls.RichTextEditor.UI.DocumentWebLayoutPresenter)rte.RichTextBoxElement.ActiveEditorPresenter;

presenter.BackColor = Color.White;

presenter.Margin = new Padding(20);

Rte.ResumeLayout();

Rte.PerformLayout(); 

Approved
Last Updated: 09 Aug 2019 05:08 by ADMIN
RadPdfViewer partially supports CCITTFaxDecode (that is basically TIFF). There are some limitations that are not supported at this stage like EncodedByteAlign = true or Group 3, 2-D encoding.
Completed
Last Updated: 15 Aug 2019 13:26 by ADMIN
Release R3 2019 (LIB 2019.2.819)
Please run the attached sample and move the spreadsheet on a monitor with 125% DPI scaling. Then, enter some text in the first cell that exceeds the column's width and double-click the header to best-fit the column. You will notice that RadSpreadsheet hangs and it is not possible to proceed with the further execution of the form.
Completed
Last Updated: 20 Aug 2019 13:20 by ADMIN
Release R3 2019

By default, if you need to format the cells in RadCalendar, the ElementRender event is an appropriate solution. However, it doesn't process the row/column header cell elements illustrated in the attached screenshot.

Workaround:

            MonthViewElement mve = (MonthViewElement)this.radCalendar1.CalendarElement.CalendarVisualElement;
            foreach (CalendarCellElement cell in mve.TableElement.Children)
            {
                if (cell.Row == 0)
                {
                    cell.DrawFill = true;
                    cell.BackColor = Color.Red;
                } 
            } 

Approved
Last Updated: 07 Aug 2019 06:33 by ADMIN

Please follow the steps:

1. Run the attached sample project. 

2. Move the form to a monitor with 125% DPI scaling.

3. Resize the form to make the spreadsheet bigger. You will notice that the column/row headers are missing for the last column/row headers. 

Approved
Last Updated: 06 Aug 2019 11:44 by ADMIN

Please refer to the sample project and follow the steps:

1. Run the attached application.
2. Hover over the calendar (custom cluster) 
3. Tooltip is shown.
4. Zoom out once 
5. Hover over the calendar.
6. No tooltip is shown - ToolTipTextNeeded is not called.
7. Zoom out once more.
8. Hover over the calendar.
9. No tooltip is shown - ToolTextNeeded is not called.
10. Zoom out once more. Now two icons are shown.
11. Hover over either calendar. 
12. Tooltip is shown.

Completed
Last Updated: 15 Aug 2019 15:27 by ADMIN
Release R3 2019 (LIB 2019.2.819)
To reproduce:
1. Add a pin to the map.
radMap1.Layers.Add(new MapLayer("PinLayer"));
MapPin pin = new MapPin(new Telerik.WinControls.UI.Map.PointG(47.60357, -122.32945));
pin.BackColor = Color.Red;
radMap1.Layers[0].Add(pin);
2. Run the project and zoom out.
3. Resize vertically the map(form).

Workaround:
Call Pan method to recalculate RadMapElement.ViewportInPixels on SizeChanged. 
private void RadMap1_SizeChanged(object sender, EventArgs e)
{
    this.radMap1.Pan(this.radMap1.MapElement.PanOffset.Width, this.radMap1.MapElement.PanOffset.Height);
}
Approved
Last Updated: 06 Aug 2019 04:49 by ADMIN
The scale factor is not imported from documents with no information about the selection state.
Approved
Last Updated: 05 Aug 2019 12:03 by ADMIN
Created by: Ken
Comments: 1
Category: Map
Type: Bug Report
1
Is there a way to not allow the map to WrapAround? 
Approved
Last Updated: 12 Aug 2019 13:04 by ADMIN
Created by: James
Comments: 3
Category: FileDialogs
Type: Feature Request
1
I'd like to prevent the possibility of an end-user deleting or copying files while saving a file. Is this possible in the RadOpenFileDialog?
Approved
Last Updated: 06 Aug 2019 13:30 by ADMIN
Created by: Kun
Comments: 1
Category: TreeView
Type: Bug Report
2

Hello,

I use radbreadcrumb as a group path explorer in my software. 

I associate it with a treeview. Please see the attache photos.

When I select a treeviewitem which has too much parent levels, the radbreadcrumb can not display the path completely.

I've tried autoscrollmargin and autoscrollminsize. No luck. Because my radbreadcrumb is in a splitcontainerpanel, the display size is changeable.

I expect a custom function can act like Windows Explorer (see the last attach photo). When there is no enough display space, only the last levels are shown.

 

PS. I've integrated the telerik solution from this post. And it works great. 

https://www.telerik.com/forums/getting-breadcrumb-to-act-like-windows-explorer-breadcrumb

 

Thank you by advance.

Kun

 

Approved
Last Updated: 02 Aug 2019 14:04 by ADMIN
Created by: Roger
Comments: 1
Category: GridView
Type: Feature Request
0

I might be missing something, but I have Hyperlinks in a column in my RadDatGridView.

 

I tried searching for a Support document explaining this, but didn't find any.

 

When the grid is exported to excel all data is coming across, but the column with hyperlink is not

a hyperlink in Excel.

 

Below is sample of the code used to make the "HyperLink" column in my grid.

                radGridView1.DataSource = dtResults;
                radGridView1.Columns.Remove("Path");
                GridViewHyperlinkColumn col = new GridViewHyperlinkColumn();
                radGridView1.Columns.Insert(5, col);
                col.Width = 200;
                col.FieldName = "Path";
                col.HeaderText = "Path";
                col.Name = "Path";

 

Coded used to do the Export....

               GridViewSpreadExport spreadExporter = new GridViewSpreadExport(this.radGridView1);
                spreadExporter.ExportVisualSettings = true;
                SpreadExportRenderer exportRenderer = new SpreadExportRenderer();

                spreadExporter.RunExport(filename, exportRenderer);

 

Thanks.

 

Roger

Approved
Last Updated: 01 Aug 2019 14:13 by ADMIN

Hello,

The CustomColorsConfigLocationNeeded event fires on dialog close but does not seem to fire on dialog open or load. So I can save a custom location for the custom colors when the dialog is closed but can't reference that location when the dialog is subsequently opened again. What am I missing?

Best regards,

Robert

 

 

 

Approved
Last Updated: 30 Jul 2019 08:56 by ADMIN
When a pdf/a compliant document is opened in Adobe, there is a bar saying that the document is compliant with the standard. Expose such functionality in PdfViewer as well.
Completed
Last Updated: 15 Aug 2019 14:26 by ADMIN
Release R3 2019 (LIB 2019.2.819)

To reproduce:

this.radMaskedEditBox1.Mask = "n";
this.radMaskedEditBox1.MaskType = Telerik.WinControls.UI.MaskType.Numeric;
radMaskedEditBox1.Value = 1234;
radMaskedEditBox1.MaskedEditBoxElement.Culture = new CultureInfo("en-CA") { NumberFormat = { NumberDecimalDigits = 0, NumberGroupSeparator = String.Empty } };

 

Approved
Last Updated: 30 Jul 2019 08:06 by ADMIN
Created by: Megan
Comments: 1
Category: DataLayout
Type: Bug Report
1

TextPosition label sizing is incorrect. Regardless of AutoSize and AutoSizeLabels settings, only the first label size is calculated correctly. I've attached a project and a screenshot of the issue. It seems size isn't calculated if TextPosition == Telerik.WinControls.UI.LayoutItemTextPosition.Top.

 

1 2 3 4 5 6