Completed
Last Updated: 16 Aug 2018 05:12 by ADMIN
ADMIN
Created by: Elena
Comments: 2
Type: Feature Request
4
Firefox version 60.0.1 and getting the following error when tyring to invoke SetCookie

ArtOfTest.WebAii.Exceptions.ExecuteCommandException: 'ExecuteCommand failed!

InError set by the client. Client Error:

JSON.parse: unexpected character at line 1 column 1 of the JSON data

Additional details shared internally! 
Completed
Last Updated: 14 Aug 2018 12:35 by Matt
Release 2019 R1 release
Created by: Matt
Comments: 0
Type: Feature Request
1
Allow adding a "Connect to pop-up window" step from the Step Builder. 

Currently, there are two ways to add a "Connect to pop-up window" step. One is to record an action that causes the pop-up and allow Test Studio to automatically add the connection step. The other is to copy and paste an existing step. 

Being able to add the step from the Step Builder prevents having to record a test, wait for Test Studio to connect, and then change the automatically created values to the desired values. 
Completed
Last Updated: 14 Aug 2018 07:32 by ADMIN
A customer's WPF application crashes when a dialog appears during a recording session with Test Studio. The actions to trigger the dialog are being successfully recorded. 

Details shared internally! 
Completed
Last Updated: 03 Jul 2018 14:09 by Vince
If you try to locate a number of elements which are structurally related to a known element in the hierarchy and use the following code:
HtmlControl tablecontrol = Manager.ActiveBrowser.Find.ByXPath<HtmlControl>("//table[@class='tTable tTableStripes']");
HtmlFindExpression expression = new HtmlFindExpression("tagindex=td");
IList<Element> foundelements = tablecontrol.Find.AllByExpression(expression);

The code compiles without problems, but at runtime it throws the exception:
InnerException:
System.NotSupportedException: Find.All is currently not supported for expressions that have a hierarchal dependency
Completed
Last Updated: 26 Jun 2018 11:53 by SIEN
1. Execute the attached test to the second step against FF or Chrome 

2. From Elements explorer choose the recorded element and try to locate it in the DOM tree. 

Expected: The element to be located in the DOM explorer

Actual: No response from the DOM explorer. 

If the above is performed in IE it works fine. 

Details shared internally. 
Completed
Last Updated: 25 Jun 2018 11:00 by ADMIN
Hi

Recently, I download and installed Telerik Testing Framework and when running the solution "QuickStarts_NUnit_cs" in Visual Studio 2013 Professional I faced some issues. The issues occurs running either Firefox ESR, IE11 (Version 11.0.9.9600.18537) or Chrome (Version 66.0.3359.181). In Firefox ESR 45.3.0 does not start any instance of browser. In IE11 and Chrome, start instance of browser but without change the URL address.

How can you fixed those kind of issues?

Best regards,
Gilberto Murteira
Completed
Last Updated: 13 Jun 2018 13:34 by ADMIN
ADMIN
Created by: Byron
Comments: 1
Type: Feature Request
21
Currently, load tests do not decode JSON and XML from the HTTP requests and responses captured for load testing. Decode these in the captured traffic and offer them as dynamic target options in the load test configuration.
Completed
Last Updated: 13 Jun 2018 13:33 by ADMIN
Currently the Test Studio Load testing feature will only detect dynamic targets if they are in a standard key-value query format. Load testing should add support for dynamic targets received and sent back to the WebAPI in a JSON format. JSON is ubiquitous and the lack of support for JSON dynamic targets is a big limitation. 
Completed
Last Updated: 13 Jun 2018 13:27 by Milan
When you schedule a test list you have a Get Latest from TFS option. When you Run List Remotely this checkbox is missing. Since we are a TFS shop we really need this option added to Run List Remotely.
Completed
Last Updated: 31 May 2018 08:59 by ADMIN
Whenever i try to open any video or document from Help or Tips and Tricks section. Application throws an unknown error and asked to either close or restart this application.

Right now i have  latest version i.e. 2018.1 130.2. But noticed same issue with earlier version also.
Completed
Last Updated: 29 May 2018 12:01 by ADMIN
Create a test with  step that captures the browser state. When executed against some websites in IE the image has blank content. The same test executed against other website capture the image successfully.

For example the following executed against Google.com captures a blank image:

            ActiveBrowser.NavigateTo("http://google.com/", true);
            System.Drawing.Bitmap brImg = null;
            brImg = ActiveBrowser.Capture();
            brImg.Save(@"C:\WebAiiLog\capture.jpg");

However the same code executed against bing.com works.
Completed
Last Updated: 17 Apr 2018 10:38 by ADMIN
Wait step for an element to 'not be visible' hangs the runner in test list using Chrome when the element could not be found. There is an exception in the log file for missing element but no further tests from the test list are starting.

Details shared internally! 
Completed
Last Updated: 14 Apr 2018 02:40 by Jin Khai
ADMIN
Created by: Konstantin Petkov
Comments: 5
Type: Feature Request
3
It would be convenient to have one more line stating what is the result of the test: PASS, FAIL, ABORTED, etc.
If it is breaking change it can be reported only if specific option was present on command line.
 Otherwise I have to open the results file mentioned on the last line, but it will same time if I just see PASS here
Completed
Last Updated: 13 Apr 2018 08:39 by ADMIN
Created by: Mathias
Comments: 3
Type: Feature Request
0
When testing my API i found that even though I set up a condition on StatusCode = 200, the test will pass regardless of response if I run the whole test. If I run the step seperately, the test will fail.
Completed
Last Updated: 03 Apr 2018 11:11 by ADMIN
When using the attribute DeploymenItem the newtonsoft could not be found. 

For example the test below could not be executed unless the Newtonsoft.Json.dll is in the GAC: 

[CodedUITest]
[DeploymentItem(@"Inventory\WebUiTestData.xml", "Inventory")]
public class TelerikVSUnitTest1 : BaseTest

If it commented out the test will work fine. 
[TestClass]
public class TelerikVSUnitTest1 : BaseTest


Details shared internally. 
Completed
Last Updated: 02 Apr 2018 14:09 by ADMIN
Details shared internally!!! 

1. Execute the test in attached project. 

2. The step 'Click SaveButton' in the popup closes the popup so it has the property 'ClosesBrowser' enabled. 

Expected: to execute all steps successfully

Actual: the last 'Close Popup' step fails 

The workaround is to insert an execution delay between the  'Click SaveButton' and 'Close Popup' to ensure the actions will be synced. 
Completed
Last Updated: 29 Mar 2018 05:56 by ADMIN
ADMIN
Created by: Elena
Comments: 3
Type: Feature Request
1
Steps to reproduce: 

1. Add a verification in a test to verify certain value is null

Actual: Despite of what value is set in the Verification it will not pass
Expected: To set 'null' or empty field so that the verification passes. 
Completed
Last Updated: 27 Mar 2018 12:29 by ADMIN
1. Record a test which contains connect to pop-up step.

2. Execute in Edge.



Expected behavior: The test should pass

Actual behavior: The Connect to pop-up step fails with timeout exception



Exception occurred waiting for the new browser to connect.
InnerException:
System.OperationCanceledException: Exception occurred waiting for the new browser to connect. ---> System.TimeoutException: Wait for condition has timed out
   at ArtOfTest.Common.WaitSync.CheckResult(WaitSync wait, String extraExceptionInfo, Object target)
   at ArtOfTest.Common.WaitSync.For[T](Predicate`1 predicate, T target, Boolean invertCondition, Int32 timeout, WaitResultType errorResultType)
   at ArtOfTest.Common.WaitSync.For[T](Predicate`1 predicate, T target, Boolean invertCondition, Int32 timeout)
   at ArtOfTest.WebAii.Core.Manager.WaitForNewBrowserConnect(String url, Boolean isPartial, Int32 timeout)
   --- End of inner exception stack trace ---
   at ArtOfTest.WebAii.Core.Manager.WaitForNewBrowserConnect(String url, Boolean isPartial, Int32 timeout)
   at ArtOfTest.WebAii.Design.IntrinsicTranslators.Descriptors.HtmlDialogHandlerDescriptor.Execute(Browser browser)
   at ArtOfTest.WebAii.Design.Extensibility.HtmlActionDescriptor.Execute(IAutomationHost autoHost)
   at ArtOfTest.WebAii.Design.Execution.ExecutionEngine.ExecuteStep(Int32 order)
Completed
Last Updated: 27 Mar 2018 07:15 by ADMIN
Data driven test using a local data source. If the columns in the grid are reordered the test is not marked as dirty and the change is not being saved. 

Steps to reproduce: 

1.  Open a test
2.  Choose 'Local data'
3.  Add a columns and drag and drop an existing column in a different place in the table.
4.  Save the test.
5.  Close and reopen the test or project.
6.  Browse to 'Local data'.
7.  Column order change was not stored, the column order reverts back to the original order.
Completed
Last Updated: 26 Mar 2018 10:06 by ADMIN
Steps to reproduce: 

1. Open a performance test and run it. 

2. Switch to History view and enter a description for any of the runs. 

3. Restart the project.

Expected: to be able to see the entered descrimption

Actual: the text is not available