Completed
Last Updated: 18 Mar 2019 14:24 by ADMIN
ADMIN
Created by: Elena
Comments: 0
Type: Feature Request
0
Kendo Drop down custom template could create the list item elements surrounded by div and thus cannot be reginized as a Kendo element by the translator. By design the translator is built to recognize spans only. It would be useful to extend the usability of the translator. 
Completed
Last Updated: 18 Mar 2019 13:35 by ADMIN
I was thinking that in some cases we might want to record a video of a test fixture so that we can see them over here without lag by playing the video, or we could even automatically run a test again if it fails to record a video of the test that failed to see exactly where and why it failed visually as well as the text log output.
Completed
Last Updated: 18 Mar 2019 13:33 by ADMIN
ADMIN
Created by: Dobry Zranchev
Comments: 1
Type: Feature Request
0
Base KendoUI translators doesn't support KendoUI Angular 2.
Completed
Last Updated: 18 Mar 2019 13:29 by Daniel
The custom website cannot be recorded and executed with Test Studio recorded against Chrome and FF. Even if the page is fully loaded it seems that ReadyState is not recognized. 

As a workaround a pollyfill for IE can be implemented in order to run the application under IE and use this browser for recording and execution. 
Completed
Last Updated: 14 Mar 2019 13:43 by ADMIN
In the new build pipeline in TFS 2015, there is no ability to run Test Studio tests because it uses a different build agent than the XAML builds, failing because of lack of interactivity. According to Telerik Support, this is a known issue.

Going forward, I would hope that Telerik would support this new build automation from TFS. 
Completed
Last Updated: 11 Mar 2019 14:56 by Daniel
ADMIN
Created by: Ivaylo
Comments: 1
Type: Feature Request
0
Currently Test Studio does not have translators for RadHtmlChart, please consider adding RadHtmlTranslator in the future
Completed
Last Updated: 11 Mar 2019 14:37 by ADMIN
Created by: Hemlata
Comments: 1
Type: Feature Request
0
It would be helpful if there was a search field in the Test Studio Help documentation so that one can quickly drill down to the topic of interest instead of having to manually open the folders to find topic they are looking for. 
Completed
Last Updated: 11 Mar 2019 14:24 by Daniel
Very often automated testing requires conditional statements that look for the property of a specific element to equal a certain value - and if it does perform an action, if not continue on with the test.  The issue we are having using If Then Else is that a failure is reported when the condition isn't met thereby failing the entire test.

Example - Some users of our system have a setting that toggles the Save Confirmation popup as on/off depending on the user.  For some users this confirmation popup appears, for others it doesn't.  I've added an If Then Else conditional statement that waits for the OK button in the confirmation popup window to Exist.  If it does it clicks the 'OK' button.  If not it continues on with the test.  

The issue is that if the 'OK' button does not exist the If Then Else logs it as a failed step when it really isn't - it's a branch in my test that decides on what actions to take based on a property value of a specific element.  This is a VERY common scenario in software testing.  

My enhancement request is to add a 'Log Failure' check box to the Test Step Properties.  The default value would be checked (log failure if step fails).  But this would also allow the user to un-check so even if the step fails it will not log it as a failed step (similar to continue on failure).  The would be a very powerful enhancement that would help to reduce the number of unique test cases we need to design and would make our automation approach for many of our test cases much simpler.
Completed
Last Updated: 11 Mar 2019 14:09 by Daniel
ADMIN
Created by: Nikolay Petrov
Comments: 1
Type: Feature Request
0
It will be quite useful to have scheduled runs in JUnit output format in sense of CI scenario.
Completed
Last Updated: 11 Mar 2019 13:14 by ADMIN
Steps to reproduce: 

1. Configure the Scheduling service as per the instructions here. 

2. Two factor authentication for the account was also enabled and a password for the application was created.

Expected: Send email after a scheduled execution. 

Actual: Error in the log file:

telerik.teststudio.executionmanagerservice.exe(1844:3),Error] ResultMailSender.ClientSendCompleted() : Smtp sending email failed: Failure sending mail.
Completed
Last Updated: 11 Mar 2019 13:10 by ADMIN
With the upcoming rebuild of the element repository, can it be added in to compile coded steps while running remotely after element repository is being dynamically generated? 
Completed
Last Updated: 19 Feb 2019 08:12 by ADMIN
A failure occurs if trying to register an OnClick event for span element.
Completed
Last Updated: 17 Jan 2019 09:31 by ADMIN
Release R1 2019 release
ADMIN
Created by: Boyan Boev
Comments: 8
Type: Feature Request
13
When you include a test as a step into a higher level test, breakpoints in the inner test don't work.

This is very inconvenient when you want to execute a "tree" of tests and need to stop in one of the nested tests.
Completed
Last Updated: 10 Jan 2019 14:08 by ADMIN

Currently in Test Studio for APIs you can use data bound variables from API Studio or Test Studio as Header Values, but you cannot use data bound variable as Header Name.

Customer wants to pass dynamically changing upon execution header names and header values from Test Studio to API Studio by adding {{something}} variable in the Name column of the Headers.

Now upon executing such request, there is an error: "Specified value has invalid HTTP Header characters.Parameter name: name'"

Completed
Last Updated: 30 Nov 2018 11:52 by ADMIN
When adding custom dynamic targets to a load test, in specific situation latest added targets get corrupted and take same data from previous ones
Completed
Last Updated: 30 Nov 2018 11:45 by ADMIN
ADMIN
Created by: Elena
Comments: 1
Type: Feature Request
0
in load profile with dynamic targets selected, values of dynamic targets in user profile are not shown in UI - Bind Unique User Info section is empty. An exception is thrown in the application log file. 
Completed
Last Updated: 28 Nov 2018 14:49 by ADMIN
Post data is being currently proceeded if the application type of the request is either multipart-formdata or urlencoded. Extend the functionality to pass the post data in case of different application type. 
Completed
Last Updated: 09 Nov 2018 11:10 by Ewin
When there are multiple tests opened in Test Studio, starting a quick run for one test does not clearly show which test is running and if you select another opened test it is not possible to spot which was the currently running test.
Completed
Last Updated: 07 Nov 2018 21:46 by figge
ADMIN
Created by: Ivaylo
Comments: 1
Type: Feature Request
1
It would be great feature in Test Studio to add CSS selectors in the find logic. It is extremely powerful in locating nested elements or elements with dynamic attributes!
Completed
Last Updated: 06 Nov 2018 11:50 by ADMIN
This causes issues in the case when scheduled jobs are configured with enabled "Get Latest from TFS". Otherwise there shouldn't be any troubles. 

Steps to reproduce:

1. Open a project and connect it to TFS, save

2. Remove the source control binding, save

3. Try to reconnect the project back to the TFS

Expected: Test Studio wizard to recognize there is a copy of the same project already and combine these.

Actual: If selecting the main project in TFS, there is a prompt the project with the same name already exists. 

Then when selecting the project folder. the remote path property of the projects gets changed and has an additional level under. 

Workaround: Once the project is reconnected to TFS with the currently possible approach, open the local project folder. Open the Settings,aiis file with a text editor and locate the property "RemotePath" and modify it to correspond to the actual structure in TFS.