Unplanned
Last Updated: 07 Aug 2019 13:53 by Andrew
It would be useful to have the functionality to build the project from command line. 
Unplanned
Last Updated: 07 Aug 2019 12:40 by ADMIN

Currently scheduling a test list with getting the latest server version of the project is only possible if the source control repository is of the TFS version control type (Team Foundation Version Control). 

It will be very useful to add the same functionality for Git source controlled projects. 

Unplanned
Last Updated: 07 Aug 2019 07:05 by ADMIN

The step to verify an element for enabled/disabled step cannot be data-driven. The 'Verify element exists' also does not provide a binding option.

However, the 'Verify isVisible' step can be data driven with true/false values for the isVisible property. 

It will be useful and helpful to unify the behavior and allow data binding for isEnabled and Exists verification steps. 

Unplanned
Last Updated: 06 Aug 2019 13:30 by ADMIN

When using a builtin step for checking rowscount of a table that uses "greater than" or "less than" it fails even though it should not.

"Equals" works fine.. but if I use any other TableVerificationType than "equals", then it fails.. unless if I convert it to a coded step.

So to reiterate: If I convert the step to a coded step then it works.

 

We have several test projects that now have failing tests because of this.

 

Attached test project that showcases the problem.

 

regards

Elo

Unplanned
Last Updated: 06 Aug 2019 11:19 by ADMIN

Pre-requisite: Upgrade to 2019.1.212.0 from 2018.3.1004.0

1. Select the Test List tab

2. Click the List button and add a new Test List with appropriate tests.

3. Click Save

4. Notice the "Storage service unreachable." message pop-up.

5. Click "OK" on the pop-up.

6. Notice that the Test List and Tests are saved as expected.

 

**This issue did not happen on the previous version of Test Studio

Unplanned
Last Updated: 25 Jul 2019 06:03 by ADMIN

Hi, 

The Application we are using stopped the support for IE. So I have to switch to chrome to be able to connect to the DOM window of TEST STUDIO. Inorder to connect to the browser, I have to use "Run - To here" option and then connect to the browser. Then I Navigate to the Page where I actually want to do the recording and debugging.

But in IE browser, I have the opened instance already and then I can connect the recorder wherever I want. This is more easier way of recording and debugging and save time.

 

So, Could you please consider this feedback and add the option for "Attach to chrome" browser. Refer to Screenshots..

 

Regards,

Nithya A.

Unplanned
Last Updated: 22 Jul 2019 08:27 by ADMIN

When the element's find expression fails to find the element it should log in the execution log, that alternative method of verification is used.

The Wait for Exists step does not log the usage of image verification, even though the find expression fails.

The behavior with click step is as expected and the log is correctly generated.

'17-Jul-19 14:10:30' - 'Pass' : 2. Click 'BtnKSubmit'
Warning: Unable to locate element by Find Expression!
Attempting to find [Html] element using 
Find logic 
(Html): [id 'Exact' tsf][TextContent 'Exact' ooogle]

Unable to locate element. Search failed!

Element was found only using Image search!
We recommend editing the element to correct the primary find expression.

'17-Jul-19 14:10:33' - 'Pass' : 3. Wait for Exists 'BtnKSubmit'


Unplanned
Last Updated: 08 Jul 2019 13:58 by Nithya
Unplanned
Last Updated: 04 Jul 2019 11:12 by ADMIN

During the trial period of Test Studio, by each start of Test Studio or Visual Studio there is a prompt window to continue the trial or activate a purchased license. 

The license prompt window of the Test Studio plugin (part of the DevCraft Ultimate package as well) in Visual Studio 2019 start window  prevents typing in the following native VS windows - Create project and Clone/Checkout code. 

Workaround: 

I. Change how Visual Studio 2019 starts: 

1. Open any existing project in VS 2019

2. Open Tools-> Options-> Environment -> Startup

3. Select any of the other listed options in the dropdown on the right - Most recent solution or Empty Environment. 

II. For the cases when DevCraft Ultimate is installed and the Test Studio plugin is not the current focus of evaluation. 

1. Disable the Test Studio extensions. 

2. Open any existing project in VS 2019

3. Open Extensions -> Manage Extensions -> disable the following extensions:

- Telerik.TestStudio.TestAdapter

- Telerik.Testing.Framework

- Telerik.TestStudio.VS2019Templates

- Telerik.TestStudio

Unplanned
Last Updated: 28 Jun 2019 10:01 by ADMIN
The search under project either hung up or took over 15 minutes and beyond to see a single letter after typing in the search box.
The project is very big and contains a big number of tests.

 
Unplanned
Last Updated: 28 Jun 2019 09:55 by ADMIN
The export to Excel functionality for load test does not work if there is no Microsoft Office with Excel installed on the machine.
Unplanned
Last Updated: 28 Jun 2019 09:55 by ADMIN

In the case when a custom layout is set and the Project explorer pane is hidden on the left side of Test Studio project, there is no indication if a new test is added in the project. 

It will be very helpful if the Project Explorer pops up to indicate that adding the test was successful. 

Unplanned
Last Updated: 28 Jun 2019 09:54 by ADMIN
Created by: Aleksandar
Comments: 0
Type: Feature Request
1
It would be good to have a mobile test list scheduling option like we have with Web tests.
Unplanned
Last Updated: 26 Jun 2019 12:50 by ADMIN
Hi,

I have a search result grid in my application and when i try to click on a specific link on the grid, but the script is clicking on another link. It is actually the next item in the search grid results. This happens on Chrome and Firefox, but works fine against Internet Explorer.

Note : When i validate the expression of the element, it showing 2nd link's InnerMarkup and OuterMarup text, this seems unusual to me. Please where is the problem ans suggest the solution.

Unplanned
Last Updated: 26 Jun 2019 09:23 by ADMIN

The imported test was created with data binding. After I imported the test successfully, I did not get/have the xls that was used in the other project. The test execution fails due to the missing data source file.

Unplanned
Last Updated: 26 Jun 2019 08:48 by ADMIN

GetComputedStyle() for hyphenated computed style against Microsoft Edge does fails with the following error:

InnerException: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
Unplanned
Last Updated: 23 May 2019 11:43 by ADMIN
 I generated html report using  ArtOfTest.Runner.exe, but when I open the html file in browser,  I'm not able to see the images for Actual or Expected. It's always displays a default images.
Unplanned
Last Updated: 23 May 2019 11:42 by ADMIN

I ran a test list through 'Schedule TestList' using "Run locally" scheduling setup and i received an email with html attachment. When i open the html I can see the actual and expected screenshot are missing.

Unplanned
Last Updated: 02 May 2019 14:18 by ADMIN

Scenario:Use a simple Login-Logout test that is separated into two different tests, executed as steps (Login test & Logout test = login-logout test) for performance run.

Issue: The current overview functionality will show the execution of the test steps 'login' and all the individual steps from the nested test, then moves onto the 'logout' test and the steps for the second nested test. The times displayed for the 'Test as Step' steps is the client side time, required for the initialization of the nested test. 

There are two options for more understandable results - the 'Test as Step' step should either not representing any time, or displaying the summed up time of the nested step execution. 

Unplanned
Last Updated: 01 May 2019 12:13 by ADMIN
Created by: Kevin
Comments: 0
Type: Bug Report
1
The logged line from a coded step in conditional loop is written before the loop starts. It should be placed at the correct position of the coded step.