Approved
Last Updated: 12 Dec 2019 14:13 by Adam
The problem is not getting the error via Dot Net programming, but the complete layout destruction of the report as a result of the fact that a picture (in our case a thumbnail of a provider) is unavailable. Catching the report error is not an option. It is too complicated and even if we succeed  in obtaining the error, it will be very complicated to remove the unavailable url on the fly and re-render the report again. 

This seems to be a "known issue" for about 8 years!

My question: Is it possible to keep the remaining report "intact" if such an error occurs? This shouldn't be too difficult for the development team..
Approved
Last Updated: 05 Dec 2019 10:27 by ADMIN
Let the user configure whether the Standalone designer to start initially in Interactive or PrintPreview mode. Currently, it starts always in Interactive mode and this may cause slow down or even hanging if the previewed report is huge.
Approved
Last Updated: 29 Nov 2019 10:05 by ADMIN
Created by: Hal
Comments: 3
Type: Feature Request
17
It would be very helpful for us people that have been using Telerik Reporting in Silverlight (or WPF) applications to have access to a Report Viewer for Windows Store Apps (XAML).  The future of Silverlight is unclear at least and there are many Line Of Business Applications currently running under Silverlight and I know of many developers that are looking to port their LOB apps to Windows Store Apps (or Universal Apps).  The current HTML5 Report Viewer does not provide printing when it is implemented in browser window in Windows Store Apps so we cannot really offer this option to our customers.
Approved
Last Updated: 27 Nov 2019 12:13 by ADMIN
Created by: Grzegorz
Comments: 1
Type: Feature Request
1
Dark theme is so much needed.
Approved
Last Updated: 20 Nov 2019 12:58 by ADMIN

If a table-based item (Table, List, Crosstab) does not fit in a single page and needs to occupy more than one page, its bottom border is not drawn on the first page and its top border is not drawn on the second (subsequent) page. This behavior is by design and its purpose is to help the users visually distinguish the table as a single item. The table has only one top and bottom border and they are displayed at the beginning and at the end of the table, regardless how many pages the table actually occupies.

Since users might find this confusing, a table should have a property controlling this behavior. The default state of the property will preserve the current rendering. If the user explicitly sets the property, then the table will draw its top and bottom borders on every page it occupies.

Approved
Last Updated: 15 Nov 2019 15:28 by ADMIN
Created by: Martin
Comments: 0
Type: Feature Request
1

As in Ticket with ID 1440072 requested we are looking for a funktionallity to send Reports via E-Mails with the WPF ReportViewer. As only the HTML-5 ReportViewer currently supports the E-Mail sending we would request the feature for WPF as well.

 

Best Regards,

Martin

Approved
Last Updated: 15 Nov 2019 06:47 by ADMIN
Created by: Scott Waye
Comments: 0
Type: Feature Request
3
When a date is set as a report parameter in the HTML5 viewer, it formats the parameter as a JSON date using a timezone.  Where no time is specified this results in a time part added to the date when received at the server.  This is a problem, especially for browser in a negative offset zone, e.g. US, where upon the date goes to the previous day.  Please add support for parameter types of date, where no time is present and no conversion is done anywhere.
Approved
Last Updated: 04 Nov 2019 12:53 by ADMIN
If a user desires to send a report by email, the recipient will receive the message from a generic email and if the recipient wants to respond, the response will go to a mailbox that is not monitored. On the other hand, if we use the "From" field and we try to do a "legal spoofing," some email servers will send our messages to spam or simply block them. It could be great to have an option to ask users their email password in the moment when they click on the button to send a report via email. In this way we can send the information in the field "From" and the password entered to the SMTP server.
Approved
Last Updated: 04 Nov 2019 12:51 by ADMIN
Approved
Last Updated: 30 Oct 2019 09:14 by ADMIN
Created by: Levi
Comments: 3
Type: Feature Request
2

The image box should allow selecting how the image should be aligned within the box.

Ie, if I select ScalePorportional, it will always center the image either vertically or horizontally. I should be able to further align it to the one or two of the sides of the box. This would allow say the upper left corner of the image to always be locked in place.

Approved
Last Updated: 25 Oct 2019 20:36 by Humberto
Currently, there is no natural way to disable picturebox errors. Sometimes we do not care to know that the image wasn't found, especially when the error shown severely damages the look of the report, stretching and pushing things out of the way. The image URL may be built via parameters, pointing to a large folder where photos of a given employee may or may not exist. It took multiple unhelpful support tickets, many headaches and days of research to finally find an obscure post by a private individual with an undocumented custom solution that worked. 
Approved
Last Updated: 25 Oct 2019 09:08 by ADMIN
Add the ability to specify rounded corners for the border of TextBoxes, Pictures, Tables and all other similar controls.
Approved
Last Updated: 16 Oct 2019 08:09 by ADMIN
Created by: Ken
Comments: 7
Type: Feature Request
8
We create many legal forms, which use nested ordered lists. In htmlTextBox for reporting, we'd like to apply styles like upper-alpha, lower-alpha, etc to the ol tag. Currently, the only numbering for an ol is 1, 2, 3. CSS ability to set the style at depth (like ol ol) would be best.
<ol>
<li>1. text</li>
<li>2. text
  <ol>
  <li>a. text
     <ol>
          <li>i. text</li>
          <li>ii. text</li>
      </ol>
  </li>
  <li>b. text</li>
  </ol>
</li>
</ol>
Approved
Last Updated: 13 Oct 2019 13:46 by John Swenson
Created by: Kerry
Comments: 18
Type: Feature Request
31
For our Customers a major drawback to creating form type reports (Invoices, Purchase Orders etc.) using Telerik Reporting is the inability to show vertical dividing lines between data columns in the 'Detail' section of the report that extend all the way down the page to the Page/Report footer. We were able to do this with Crystal Reports. But we plan to migrate all our Crystal reports to Telerik.
Approved
Last Updated: 11 Oct 2019 12:09 by n/a
I would like to be able to do this syntax: Fields.Address?.State.  If address is null, then it is the same as state being null.  Instead of displaying an error, it would just show blank.
Approved
Last Updated: 10 Oct 2019 16:24 by Huy
Created by: Kevin
Comments: 12
Type: Feature Request
30
Please add support for Data Matrix barcodes.  As of Q3 2014 this is the only format we will still need to rely on another library to create an image that is placed in a picture box.  We would much rather be able to use the Barcode control for all our barcode requirements.
Approved
Last Updated: 10 Oct 2019 12:50 by ADMIN
Created by: Karl
Comments: 0
Type: Feature Request
2
Please, add functionality that allows the user to print the Grouping value on each page if its content does not fit on one page.
Approved
Last Updated: 08 Oct 2019 11:46 by ADMIN
Created by: Karl
Comments: 1
Type: Feature Request
1

Hi,

Most design programs allow the user to select and object and "nudge" (move) up, down, right, left in very small increments.

I miss this feature in the report designers.  Always have to use the mouse is not the best experience in tight places.

Please add this capability.

Some programs also have variations of the feature base on the if the user presses CTRL+ {ARROW} or SHIFT + {ARROW}

Thank you,

Karl

Approved
Last Updated: 07 Oct 2019 11:33 by ADMIN

StyleRule Collection Editor Members list NEEDS to be resizable. 

PLEASE SEE THE ATTACHED IMAGE

It's frustrating to have to scroll a Listbox horizontally to read the values. 

This control should be wider by default, and then allow the user to resize, and then REMEMBER their resize.

Thank you,

Karl

Approved
Last Updated: 07 Oct 2019 10:40 by ADMIN

Hi,

It gets frustrating always resizing every dialog so I can use it, each time I open them.

Please give the Report Designer Dialogs, and Visual Studio dialogs a save size setting so when reopened they will go back to the same size.

Thank you,

Karl

1 2 3 4 5 6