Under Review
Last Updated: 17 Jul 2019 07:44 by Simon
Created by: Chris Trina
Comments: 10
Type: Feature Request
32
Our clients enter information using the radeditor and in many cases want to embedded tables and graphics into their text.  Using your reporting tool there is no way to print this information.  I know you have suggested using your table and image tools, but that doesn't work when you are dealing with freely formatted text so the existance and location of the tables and images cannot be predicted.
Approved
Last Updated: 16 Jul 2019 18:22 by n/a
To have a better performance would be nice to cancel report rendering automatically or manually. 
If I am asking for a big report and after I change parameters and request new report, the previous request is still in progress and it is not going to be cancelled. Therefore I see high memory consumption on continuously refreshing a reports with a big data and after some time I see complete slow down of the Reporting Service and of course slow down of the server itself. The memory in this case is not released and Reporting Service crashes sometimes.
Approved
Last Updated: 16 Jul 2019 13:22 by ADMIN

When exporting a long report with ContinuousPaper = true in Word format, the output document has text cut.

Based on the limitation explained in the Pagination section in Design Considerations for Word Rendering article of our documentation, Word supports maximum page size of 22 inches wide and 22 inches high. If the page is higher than 22 inches, some data may not be displayed in Print Layout view. So, in Word, a long document couldn't be rendered.

At least, this property could be avoided when printed in Word format.

Approved
Last Updated: 15 Jul 2019 15:03 by ADMIN
When a Panel is left docked to the detail section of a report and a table spills to another page, leaving empty space at the bottom (to indicate the table continues), the Panel height is less than the detail section height.
Approved
Last Updated: 15 Jul 2019 13:02 by ADMIN
Created by: Brandon
Comments: 1
Type: Feature Request
0

Feature Request - Show email sent / error notification using the report viewers built-in notification system. 

It would be nice to have an option to have a message shown when the email with the report is sent or if there was an error sending.
Right now when you hit email and send the user does not know if it was successful or not. Being async is nice but I have noticed that it could take a few seconds to complete and if the user navigates away from the report viewer during this time the report has the possibility of not sending. Either way right now the user has no definitive method of knowing if the email was sent or not.

 

 

Declined
Last Updated: 15 Jul 2019 11:24 by ADMIN
Created by: Tursunhuja
Comments: 1
Type: Feature Request
3

Reporting environment:                                                                                      

  • UWP using the web viewer
  • Odata web service to retrieve data (Web service data source)

The problem: I have a table that has several million records. I have a report with parameters to query those records. Example on a sales report: Customer (All or specific customer) and Product (All or specific product) and date range.  If by mistake the user selects all customers, all products, and a date range of 10 years, he may get millions of records for the report.  After several seconds he realizes that he entered the wrong parameters and wants to cancel the report.  There is no way to cancel. The solution was to run this in another thread and kill the process. That seems like a hack and doesn’t stop the web request so the web service keeps working even after the report has been killed.

Change request: Allow canceling in two ways:

  1. The report viewer (we are using the web viewer) should have a cancel button
  2. We should be able to cancel a report programmatically. 

The web data source should implement the “Cancellation Token” and cancel the web request when the report is canceled.  Postman, browsers, and other tools use this technique so that the web service understands that the data is no longer needed and it can stop the request.

Some links explaining how to implement Cancellation Tokens:

Approved
Last Updated: 15 Jul 2019 10:46 by ADMIN
Created by: Daniel
Comments: 0
Type: Bug Report
1
When a column is hidden through binding, a small gap appears to the border of the next column.
Approved
Last Updated: 11 Jul 2019 11:45 by ADMIN
Sometimes the KeepTogether property of the group header doesn't work properly. The content goes to next page even if there is enough space for the items.
Approved
Last Updated: 11 Jul 2019 06:22 by ADMIN
ADMIN
Created by: Milen
Comments: 2
Type: Feature Request
11
As a developer
I would like to have a built-in support for rendering various gauges in the report content
So that I can represent numeric values in a visually appealing way.
Approved
Last Updated: 04 Jul 2019 10:12 by ADMIN
When a TextBox is deleted from a localized report, if a new TextBox is added, its localized value would be set to the localized value of the deleted TextBox.
Declined
Last Updated: 03 Jul 2019 08:54 by ADMIN
Created by: Patrick
Comments: 1
Type: Feature Request
0

Hi, can you organize the progress windows' program group and group packages by version? A sample of half of my list in windows in the file I joined.

Thanks,

Approved
Last Updated: 02 Jul 2019 09:08 by ADMIN
After the report is translated we started to change the sequence of parameters. This works fine except the translated texts do not move with it. So parameters have the wrong text.
Pending Review
Last Updated: 01 Jul 2019 05:25 by ADMIN

Hi,

 

There is an issue where the search window that opens from the Report Viewer tool bar does not allow for deleting text from the search string input box using backspace.

The keyboard command provider seems to have many other keys covered for the intended behavior, but backspace does not seem to be handled appropriately.


Approved
Last Updated: 28 Jun 2019 10:17 by ADMIN
It would be nice to have Visual Studio Item Templates for Telerik Reporting REST Service and Html5 Viewer also for .NET Core projects
Approved
Last Updated: 26 Jun 2019 13:09 by ADMIN
When in a table group GroupKeepTogether is set to True and PageBreak to After, the Table item may not render correctly in physical paging formats. In formats, without physical paging, the report is displayed correctly.
Completed
Last Updated: 26 Jun 2019 06:50 by ADMIN

After R1 2019 Telerik Web Report Viewers use Kendo splitter for resizing Parameters and Document map areas. At this point, there is no way to change the Parameters Areas position.

Under Review
Last Updated: 25 Jun 2019 15:16 by Kori

At the moment it's only possible to have your reports in old-fashioned projects.

It should be possible to add/design reports to SDK-style projects. That should work no matter what target framework is (.NET Core, .NET Standard or .NET Framework).

Approved
Last Updated: 25 Jun 2019 10:09 by ADMIN
It will be great if the Office (Word, Excel, PowerPoint) reports generated by Telerik Reporting can be password protected.
Approved
Last Updated: 24 Jun 2019 10:05 by ADMIN
Created by: John
Comments: 0
Type: Feature Request
2
It would be great if it is possible to access the Windows User in the report without the need of writing additional code.
Approved
Last Updated: 24 Jun 2019 09:08 by ADMIN
Created by: Peter
Comments: 0
Type: Feature Request
1
Currently to add a new Shared/Project DataSource a new component item is added and then modified manually to Telerik Reporting DataSource. This is not obvious and is kind of peculiar workflow. Thus consider adding ItemTemplates to manage the process for adding new Telerik Reporting Shared/Project DataSources.