Approved
Last Updated: 15 Oct 2019 07:42 by ADMIN
I want to disable/hide the columnMenu the same way like disabling sorting or filtering...
it is not supported the same way as disabling sorting or filtering but only with some Javascript which is not a good solution and not consistent
Approved
Last Updated: 15 Oct 2019 07:02 by ADMIN

Excel supports deselecting cells from selected ranges, e.g. selecting a range from cell A1 to A10 results in a range A1:A10. Then deselecting cell A5 from that range produces two new ranges - A1:A4 and A6:A10.

Now a more complex example - selecting multiple ranges with intersecting cells - A1:B10, A5:D10, A9:C14 and A9:G9.


Deselecting cell B9 in Excel produces a new range with cell A9 only and then a range C9:G9. And B9 should be excluded from the other 3 ranges.

Currently the Spreadsheet widget does not know how to do this. There is no logic to decide what new ranges should be created on such operation. What it currently knows is creating new ranges and these ranges may overlap. Thus clicking on cell B9 creates a new range with cell B9, instead of deselecting B9 from the already selected ranges.

Approved
Last Updated: 14 Oct 2019 11:28 by ADMIN
Created by: Oleksandr
Comments: 2
Category: TreeList
Type: Feature Request
20
Please, add for TreeList support of setOptions and getOptions methods.
Approved
Last Updated: 11 Oct 2019 07:50 by ADMIN

If you open the popup of the above components and resize the browser window with the popup still opened, the component is being resized according to the window size but the popup keeps its initial width. 

The above scenario can be observed on this link: https://dojo.telerik.com/ovOTUDeV 

Approved
Last Updated: 10 Oct 2019 04:37 by ADMIN

I'd like to request the functionality to change the multiple selection process of the Kendo UI Grid to be the same as Excel.  For example, the following shows a block of cells selected instead of all of the cells in-between the selected cells from Shift+Clicking:

Thank you!

Approved
Last Updated: 09 Oct 2019 15:24 by ADMIN
Created by: David
Comments: 1
Category: MultiSelect
Type: Feature Request
1

There is no way to sort the selected items inside the MultiSelect

It would be nice to have such functionality implemented or provide an implementation that can achieve the described functionality.

Approved
Last Updated: 09 Oct 2019 15:15 by ADMIN
Created by: Brian
Comments: 1
Category: Kendo UI for jQuery
Type: Feature Request
0

Hi Telerik Team,

Great PDF export feature! It's the best I've seen.  We would like support for exporting to PDF/A for archival.  Is this possible? 

Thanks,

Brian 

Approved
Last Updated: 09 Oct 2019 15:14 by ADMIN
Created by: Sławek
Comments: 0
Category: PDFViewer
Type: Feature Request
0
I'd like to ask if you plan to add a feature to PDFViewer allowing opening files secured with an owner password.
Approved
Last Updated: 09 Oct 2019 15:13 by ADMIN
Consider implementing functionality for importing and working with encrypted / password protected Excel files in the SpreadSheet component
Approved
Last Updated: 08 Oct 2019 07:01 by ADMIN
Created by: Mat
Comments: 1
Category: Filter
Type: Feature Request
2

Hi Team,

When a date filter is applied in the new Filter widget, the preview looks like: "Date Is After 'Tue Jan 01 2019 00:00:00 GMT+0000 (Greenwich Mean Time)'" -- I'd like to be able to customize the displayed date format, something like adding "format:"{0:dd/MM/yyyy}" to the 'fields' object.

Thanks

Approved
Last Updated: 07 Oct 2019 07:46 by ADMIN

Hi.

kendoGrid Pager has a feature of disabling focus of pager arrows with a tabindex="-1".

I was able to override this behavior in some cases. But sometimes it becomes tricky to override this behavior.

My question is:

"Is it possible to disable this behavior, not to override it but really disable. Or if not - maybe you have plans to add such an option in the future (maybe I can submit to the feature updates somewhere)?"

Approved
Last Updated: 04 Oct 2019 11:46 by ADMIN
Created by: Dennis
Comments: 0
Category: Editor
Type: Feature Request
1

Currently, the images in the Editor component are being handled as base64 code. Inserting larger images could cause browser issues. 

This is why it will be nice if there is a built-in functionality that enables configuration options to setup upload for images on Drop/Paste upload and insert links to the destination path.

Features of this functionality:

  • Show progress bar for the images being uploaded
  • Add configuration which can set the URL to the destination of the uploaded images for the links
Approved
Last Updated: 04 Oct 2019 08:10 by ADMIN
Created by: Sandeep
Comments: 1
Category: Spreadsheet
Type: Feature Request
1

Enhancement

Please refer to this Dojo example - https://dojo.telerik.com/IRIRahoS/2.

Current behavior

Currently, if the filter configuration is not explicitly set, the filter button from the toolbar seem inefficient. If you toggle a filter for a column, that filter is applied for that column only. In Excel, the filter will be applied for all columns. Also, you need to manually select all the cells that you wish to filter/sort.

Steps to observe the above:
In the Dojo example, toggle filter for a column only (without manually selecting cells).

You can see that the filter will be applied for that column only. Please compare to Excel.

You will see that there is no content to be filtered/sorted. You need to select manually. Again, please compare to Excel.

Expected/desired behavior

When the filter button is pressed, execute the filter configuration logic, so that it will behave as Excel.
filter: { ref: "A3:G49", columns:[] },

Approved
Last Updated: 04 Oct 2019 05:40 by ADMIN
Created by: Bilal
Comments: 0
Category: PDFViewer
Type: Feature Request
1

I have experience with OpenText Brava Enterprise. I've had the chance to integrate their Viewer in our in-house document management system. This viewer opens up to 100 file formats and allows to add/remove/edit annotations on files and saves these annotations as a separate layer on top of the file. So next time you open the same file to view, you can load the annotations (via API) calls and place the layer of annotations on top.

I was hoping I would see the same thing with Telerik PDF Viewer (and I am aware this works only for PDF). To allow the user to add a Text comment, Shapes, Stamps, Image, PDF Bookmark, etc.

Approved
Last Updated: 03 Oct 2019 10:44 by ADMIN
Created by: Bridge24
Comments: 4
Category: Grid
Type: Feature Request
3

Hi, we use the grid "toolbar" property.  But, we found that the documentation of the kendoToolBar "standalone" offers more possibilities, like adding a type "separator", groups, toggle, ...

My question is:
When I create my grid, is it possible to get a reference to its containing kendoToolBar (if it's a complete kendoToolBar ?), that allow to add more complex items.

Something like: 

var kgrid = $('#grid1').kendoGrid({toolbar: [...]}).data("kendoGrid").

var kToolbar = $('#grid1 .k-grid-toolbar').data("kendoToolBar") // or kgrid._secret_property?

kToolbar.add({type: "separator"})

I tried that, but the kToolbar is undefined.

 

Approved
Last Updated: 02 Oct 2019 11:24 by ADMIN
Created by: SAM
Comments: 0
Category: Data Source
Type: Feature Request
1

When the grid is configured for working with UTC on the server-side, the value sent from the filter menu on the client-side would not be properly sent to the server. 

If the stringifyDates option of the transport of the data source is set, the value would still be sent in a localized date format without information for the time zone, for instance, GMT(+0300).

In case the value sent from the client is modified, the parameterMap would be called afterward and would override the modified value. 

Moreover, the Kendo UI Binder on the server-side is not configured to be working with dates that have additional data for the time zone appended to the end. Therefore, sending the modified data would not be parsed correctly and FormatException error would be thrown.

Approved
Last Updated: 01 Oct 2019 13:06 by ADMIN
Created by: Vaishali
Comments: 1
Category: Gantt
Type: Feature Request
1

Implement support for external editor in the Gantt. Instead of using an editor template or calling the editTask method, make possible Gantt tasks to be updated without opening the default editor.

A modification in a child task, e.g. changing its start date, should also update the summary task.

Approved
Last Updated: 01 Oct 2019 07:29 by ADMIN
Created by: Hitendra
Comments: 1
Category: Scheduler
Type: Feature Request
2

Hi Team,

 

It would be nice to have a feature of Collapsible / Expandable grouping function like tree view in Kendo Scheduler Timeline view. We have multiple head groups with 100 sub groups which we are not currently able to Expand / Collapse.

 

Sample Expand / Collpase feature like https://demos.telerik.com/kendo-ui/treeview/checkboxes

File attached for reference.

 

Thank you.

 

 

 

Approved
Last Updated: 30 Sep 2019 12:34 by ADMIN
Created by: Peter
Comments: 1
Category: Grid
Type: Feature Request
0

As followup on Ticket ID: 1431527 screenshots and sample code provided.

"The GridColumnBuild does not have an implementation for the Locked functionality against the dynamic type. The class that gets serialized and sent to the client-side would not have a property for the locked column, therefore, there would be no locked columns."

Can you please examine this functionality?

 

Best,

Peter

Approved
Last Updated: 26 Sep 2019 14:26 by ADMIN
Created by: Alexander
Comments: 1
Category: Chart
Type: Feature Request
0
Please add pdf.allpages functionality in kendo-chart similar to kendo-grid:
https://docs.telerik.com/kendo-ui/api/javascript/ui/grid/configuration/pdf.allpages

We are using 2 kendo components together: kendoChart & kendoPager:
https://dojo.telerik.com/iqOnEHUN

We need to export the entire kendo-chart so that each page in kendo-chart gets its own page in the PDF file.