Approved
Last Updated: 03 Jan 2020 15:15 by ADMIN
Created by: Patrick
Comments: 6
Category: Data Source
Type: Feature Request
50
At the moment, the DataSource only uses one field for its ID property (if you enter several, then only one is used, apparently).  This doesn't reflect reality, in that in many cases (where one record is a child of another), the key field for a database table is a composite (from 2 or more fields).  
The existing situation causes problems in inline editing of the KendoUI grid, because default values need to be set for foreign key fields, but if these are set to a valid value, then spurious calls to the Inline_Create method occur because the DataSource treats the record as a new record when it is not.
In any case, allowing multiple fields would simply reflect reality.
Approved
Last Updated: 03 Jan 2020 15:14 by ADMIN
Created by: Sebastian
Comments: 0
Category: PivotGrid
Type: Feature Request
26
Problem:
The values and fieldnames can be very long or very short. Based on that, values and fieldnames are often truncated or lost in a way to wide column. That behavior has many downsides:
- The PivotGrid need much more space then it should
- Long values and fieldnames can't be read
- It's totally not responsive and looks bad

Competitors solution:
- http://www.igniteui.com/pivot-grid/all-grid-features
- http://webix.com/pivot/

Problem-solving approach:
- Show resize icon when hovering over a the bar between two columns
- Resize this column to it's min. width (value or fieldname) after a double click on this bar
- Manual resizing of the column by drag and drop of this bar
- Automatically size columns to there min. width on initialisation
Approved
Last Updated: 03 Jan 2020 15:09 by ADMIN
Created by: Sebastian
Comments: 5
Category: PivotGrid
Type: Feature Request
34
I want to sort rows and columns by values (not fieldnames).

One way to do that is like it's done by DevExpress (https://demos.devexpress.com/ASPxPivotGridDemos/OLAP/Browser.aspx). By right clicking a field i can choose for with field, row, column and measurement i want to sort. But even this solution could be more userfriendly.

Another more direct solution would be to sort by clicking on a measurement field or if there is only one, on a fieldname.

Both are just suggestions. But the functionality of sorting by values is really relevant.

http://www.telerik.com/forums/sort-rows-and-columns-by-values
Approved
Last Updated: 03 Jan 2020 14:41 by ADMIN
Created by: Simon
Comments: 8
Category: Kendo UI for jQuery
Type: Feature Request
62
Add a new Kendo UI component to display a record vertically (Or add an option to the existing grid to change the orientation of the records).

Usually, I was using vertical grid to display a single record but some people might need it to display more than one record (ex: when you compare items on best-buy web site)

The vertical grid could also be used as a property grid (http://www.telerik.com/products/silverlight/controls/propertygrid.aspx).
Approved
Last Updated: 03 Jan 2020 14:41 by ADMIN
Created by: Mark Dawson
Comments: 2
Category: Grid
Type: Feature Request
68
Ability for a grid to show foreign key values from a remote datasource rather than just a fixed array.

Refer to: http://www.kendoui.com/forums/ui/grid/foreign-key-option-doesn-t-work.aspx
Approved
Last Updated: 03 Jan 2020 14:33 by ADMIN
Created by: Imported User
Comments: 2
Category: Kendo UI for jQuery
Type: Feature Request
60
Today you can only export JavaScript primitive values - String, Number, Date, Boolean.

http://www.telerik.com/forums/export-grid-to-excel-cells-with-hyperlink
Approved
Last Updated: 03 Jan 2020 14:31 by ADMIN
Created by: Rodney
Comments: 2
Category: Kendo UI for jQuery
Type: Feature Request
29
My marketing department has requested a specific look for a chart. The Moc up image is http://i.imgur.com/Z2hKaei.jpg in order to achive what they are asking I need the Labels to work in the Bullet Charts. 

It would also be great if you could add a label to the Target as pictured in the image. 
Approved
Last Updated: 03 Jan 2020 14:30 by ADMIN
Created by: Michael Sogos
Comments: 14
Category: Kendo UI for jQuery
Type: Feature Request
61
I'm using kendo ui for mvc and a control that could be very useful is a captcha for form submission.For sure you can integrate it by using Google reCaptcha in a easy way not only for kendo ui for web but for mvc also.A good idea could be to integrate you own captcha control (for intranet environment, or private internet network ) because reCaptcha only work with a stable internet connection (Google Web Service).
Approved
Last Updated: 03 Jan 2020 12:46 by ADMIN
Created by: Randy
Comments: 0
Category: TreeList
Type: Bug Report
1

Bug report

If the read() method of the data source of the TreeList widget is called, the pager is not refreshed. It retains the only pages and information.

Reproduction of the problem

1. Update the data source of the TreeList widget.

2. Notice that the pager is not completely refreshed.

A Dojo sample for reproduction:

https://dojo.telerik.com/aHIPUgIz

Expected/desired behavior

Refresh the pager whenever the data source of the TreeList is refreshed.

Environment

* **Kendo UI version:** 2019.3.1023
* **jQuery version:** 1.12.4
* **Browser:** [all] 

Approved
Last Updated: 27 Dec 2019 13:52 by ADMIN

Bug report

DOJO

Reproduction of the problem

  1. Open the dojo
  2. Enter in Edit mode via the Edit button
  3. Navigate to the Update button via keyboard

Current behavior

Detail Template is toggled on Enter.

Expected/desired behavior

When the target is any of the Command Buttons, the Grid should hide/show the detail view.

Environment

  • Kendo UI version: 2019.1.220
  • Browser: all
Approved
Last Updated: 27 Dec 2019 13:50 by ADMIN

When there is not enough space for the filter menu to be opened downwards, it should be opened on top. However, the first time it is opened, it is positioned below the filter button. 

Experienced behavior: 

Filter menu is mispositioned when first opened. With consequent openings, the menu is positioned as expected.

Expected behavior: 

The calculation for the positioning should be done even with the first initialization.

A sample Dojo for the reproduction of the issue:

https://dojo.telerik.com/iRaDakEs

First initialization:

https://www.screencast.com/t/vmnVGhDBobi

Second opening:

https://www.screencast.com/t/S6Qzza6ve4UO


Approved
Last Updated: 27 Dec 2019 13:36 by ADMIN
Let's say we have an grid with incell editing and navigation enabled. But also there may be some column which are readonly (non editable ).  Currently when I press the tab from an editable cell it focus on non editable cell's ,which is no needed. I'll prefer to have a navigation which is stopping only at the editable cells when I press the tab.  And also I would like to add new row when I press the tab form last editable cell in the last row.
Approved
Last Updated: 27 Dec 2019 13:33 by ADMIN
Created by: David
Comments: 0
Category: Grid
Type: Feature Request
0

Please consider adding groupHeaderColumnAttributes as a feature. groupHeaderColumnTemplate is a welcome addition to the grid capabilities and it would be great to easily set styles on group header columns. Frankly, it would be helpful to have attributes available for templates (groupHeader, groupFooter, etc.).

 

Thanks

Approved
Last Updated: 27 Dec 2019 08:09 by ADMIN
Add methods in Kendo UI that convert to and form Excel date number from and to locale date & UTC date.
Approved
Last Updated: 25 Dec 2019 06:16 by Naveen
Created by: Naveen
Comments: 0
Category: Spreadsheet
Type: Bug Report
7

Bug report

Office 365 Comment are shown with a warning:
"[Threaded comment]

Your version of Excel allows you to read this threaded comment; however, any edits to it will get removed if the file is opened in a newer version of Excel. Learn more: https://go.microsoft.com/fwlink/?linkid=870924

Reproduction of the problem

go to demo - https://demos.telerik.com/kendo-ui/spreadsheet/index

Current behavior

import a file from ticket - 1447268

A warning is displayed

Expected/desired behavior

No warning is displayed

Environment

  • **Kendo UI version: 2019.3.1023
Approved
Last Updated: 24 Dec 2019 08:35 by ADMIN
How to implement SearchRow in RadGrid for ASP.Net similar to SearchRow in WinForms RadGridView

The SearchRow in RadGridView WinForms is extremely good.

https://docs.telerik.com/devtools/winforms/controls/gridview/rows/search-row 

How can we implement the same in Kendo UI RadGrid?
Approved
Last Updated: 23 Dec 2019 12:32 by ADMIN
Created by: Jarmo
Comments: 0
Category: Chat
Type: Feature Request
0
I would like to be able to show a group that contains message history by prepending messages in a separate group.
Approved
Last Updated: 23 Dec 2019 08:54 by ADMIN

Bug report

TreeList shows wrong total and paging when we expand or collapse a row after filtering.

Reproduction of the problem

1. Go to TreeList demo link - https://demos.telerik.com/kendo-ui/treelist/index
2. On "Position" column apply filter with value "VP, Engineering"

3. After filtering only 4 rows will be visible, and the number of rows at the bottom of grid shows "1 - 4 of 4 items".
4. Now collapse the second row. Notice that the total at the grid bottom changes to "1 - 15 of 4 items" which is wrong.


Expected/desired behavior

The shown message within the pager has to be "1 - 4 of 4 items" instead of "1 - 15 of 4 items".

Environment

* **Kendo UI version:** 2019.3.1024
* **jQuery version:** 1.12.4
* **Browser:** [all] 

Approved
Last Updated: 23 Dec 2019 07:18 by ADMIN

Hi 

In the TreeList control when I Freeze first column and apply multi column header in some other column, then setting the filterable property for a column after multi column header is applied to some other column instead of the column on which it is set.

 

You can find a working sample here.

In this example note that I have set the filterable property false for field "Phone" but its effect is applied on "Position" field and its filters are hidden. Similarly if you apply filterable: false on "Extention" field then the filter on "Address" field will be gone.

 

Kindly provide a solution for this problem, also let me know if a work around exists for this issue.

Approved
Last Updated: 20 Dec 2019 12:21 by ADMIN
Created by: VnDevil
Comments: 1
Category: Editor
Type: Feature Request
17

Hi Support,

 

I want imageBrowser have a options to set allow Multiple upload images. I was try set multiple = true in upoad controls in imageBrowser but It's not working well.