Approved
Last Updated: 10 Sep 2019 08:56 by ADMIN
Created by: Chris
Comments: 0
Category: Spreadsheet
Type: Feature Request
0

The filtering on the spreadsheet component is great!!

There is however one behaviour that causes confusion for end users, and that is filtering when merged cells  are present in the selection.  
An example is available in the following dojo:
https://dojo.telerik.com/UzUMUDos

Open the dojo and filter column A on a1 and you will only see only b1 in column B, but the b1a will not be shown.

To be clear - This is also how Excel behaves...  (which is of course your prime aim so its not a bug as such)... 
Interestingly google sheets stops you putting filter on merged cells / stops you merging on filtered column.

The Excel behavior is discussed in the following threads:
https://stackoverflow.com/questions/49816515/excel-filtering-for-merged-cells
https://www.officetooltips.com/excel_2013/tips/workaround_for_sorting_and_filtering_of_merged_cells.html

Is it possible to implement something, so the end user experience would be improved? Maybe when merged cells are present :
a) if they click filter, this is detect and user is warned of this behaviour
b) if they click filter, the sheet is changed into an unmerged version (which repeats data in merged cells) as in the excel examples above.

 
Approved
Last Updated: 10 Sep 2019 08:55 by ADMIN
Created by: Chris
Comments: 0
Category: Spreadsheet
Type: Feature Request
0
Currently the API does not provide a way to detect when filtering occurs. It would be great if you could add a filter event.
Approved
Last Updated: 06 Sep 2019 07:33 by ADMIN

When using IE 11 and using Ctrl+X to cut, this only works the first time. All subsequent attempts to use cut produce the following dialog:

Approved
Last Updated: 03 Sep 2019 10:53 by ADMIN
I need some event which gets fired when cell data validation gets failed, with entered what value got entered by the user and cell row and column index.
Approved
Last Updated: 03 Sep 2019 10:08 by ADMIN
Created by: Holly
Comments: 1
Category: Spreadsheet
Type: Feature Request
0

We have a client that recently brought to our attention the fact that he found a case where he couldn't place his cursor in a certain spot of a formula, click a cell, and have it fill that cell in. It works if you try to do that for the first cell listed in the formula, but not the rest. I've outlined a sample case below.

You can enter a formula in a cell like =IF(A2+B2, 1, -(A2+B2), 2). Then, highlight a cell, like A2 below, and delete it by hitting backspace or delete.

After hitting delete, leave the cursor in the same location of the formula and click a new cell, like A4.

For this case, since it's the first cell in the formula, it will insert the cell you just clicked on in the correct location. However, next try highlighting the next cell referenced, hitting delete, and clicking on a new cell to have it insert the cell into the formula. In this case, we highlighted and deleted B2, then tried to click on B4.

You'll see that, for this one, instead of inserting B4, it gives an error message. Our client said that it significantly slows him down when he has to manually type in each change to the formula, so is there any way we could have it insert the cell you click on for all cases? It doesn't look like this is a current feature, so would you be able to add it, please? Thank you!

Approved
Last Updated: 30 Aug 2019 04:59 by ADMIN

Bug report

Reproduction of the problem

Reproducible in the demos.

  1. Use the HYPERLINK function in a cell:

=HYPERLINK("https://google.com")

Current behavior

The link does not work. It does if you specify a "friendly name":
=HYPERLINK("https://google.com", "google")

Expected/desired behavior

The link works with and without a "friendly name" specified, as in Excel.

Environment

  • Kendo UI version: 2019.2.619
  • jQuery version: x.y
  • Browser: [all]
Approved
Last Updated: 22 Aug 2019 10:51 by ADMIN
Created by: G.K. Raju
Comments: 0
Category: Spreadsheet
Type: Feature Request
0
Currently there is no suitable event to detect cell styling changes. Such event could be implemented similar to the formatChange event but for the styling changes.
Approved
Last Updated: 07 Aug 2019 06:54 by ADMIN
Created by: Naveen
Comments: 1
Category: Spreadsheet
Type: Feature Request
0

Dear Concerned,

1. Launch https://demos.telerik.com/kendo-ui/spreadsheet/index

2. Import attached Dummy.xlsx file

3. No data loaded

4. please check

 

 

Approved
Last Updated: 01 Aug 2019 08:34 by ADMIN

Other spreadsheet applications (Excel and Google Sheets, to name two) offer the ability to insert individual cells into a sheet without inserting a whole row/column. Most importantly, this feature updates cell references in formulas, which is not something that can be done with copy and paste.

For example, in the following spreadsheet (screenshot from Excel), I've right-clicked cell A2 and chosen "Insert" on the context menu. There is also a button on the ribbon that opens the same "Insert" dialog.

I want to shift the cells down, so I click OK in the dialog. Note that the formulas update accordingly: the sum range expands to A1:A5, while the individual cell references remap.

Can this feature please be added to Kendo spreadsheet? Otherwise, our clients will have to continue manually re-writing formulas after they copy/cut and paste to achieve a similiar-looking (but functionally different) result.

Thanks!

 

Approved
Last Updated: 25 Jul 2019 13:04 by ADMIN

Bug report

The current client-side export functionality does not preserve the number of columns.

Reproduction of the problem

  • Load the following file in the Spreadsheet which contains columns up to "BA".

  • Export the file

  • Load the file again in the Spreadsheet and notice that the columns are displayed up to "AX" instead of "BA".

Current behavior

Client-side export does not preserve the number of columns greater than "AX".

Expected/desired behavior

Client-side export does not preserve the exact number of columns.

Environment

  • Kendo UI version: 2019.2.619
  • Browser: [all]
Approved
Last Updated: 22 Jul 2019 13:56 by ADMIN
Enable Cut/Copy cell values and can Paste it in mutiple selected values
Approved
Last Updated: 25 Jun 2019 07:29 by ADMIN
Created by: Naveen
Comments: 1
Category: Spreadsheet
Type: Feature Request
1

Dear Concerned,

 

1. Launch https://demos.telerik.com/kendo-ui/spreadsheet/index

2. Open Attached Test.xlsx file

3. Check the value of A2, it is different than Excel

Note: Cell format of A2 is set as below, if I select only $ format then it is working.

Approved
Last Updated: 24 Jun 2019 07:59 by ADMIN

On Internet Explorer-11, UI is getting blocked while performing comparatively fast data entries, it is not only too slow but values are getting truncated as well.

 

1. Open https://demos.telerik.com/kendo-ui/spreadsheet/index in IE 11

2. Start editing cells C3 to C12 and enter value 1234 in each cell as fast as possible

3. 1234 enter, 1234 enter , 1234 enter and so on without waiting for UI rendering completion as UI freezes for few seconds, and then all cells get updated in one go

4. below is the result, few cells are having wrong values 

5. Its very serious issue

Note: Excel 365, Excel and GoogleSheet works fine in such cases

Approved
Last Updated: 18 Jun 2019 09:30 by Steven

Bug report

When a string, used as old_text for SUBSTITUTE(text, old_text, new_text, [instance_num]) function, is repeated more than once and the new_text is an empty string, one occurrence of the old_text remains not substituted.

Reproduction of the problem

  1. Go to Spreadsheet Basic usage demo
  2. Add a new sheet
  3. Type ab113abababab11ab in A1
  4. Enter the following formula in B1 =SUBSTITUTE(A1, "ab", "")

NOTE: substituting ab with another string, e.g. cd, replaces all instances of ab as expected.

Current behavior

113ab11 - when ab is repeated more than once in a row, one of its instances remains unchanged to an empty string

Expected/desired behavior

11311

Environment

  • Kendo UI version: 2019.2.514
  • Browser: all
Approved
Last Updated: 03 Jun 2019 12:18 by ADMIN
Created by: Naveen
Comments: 3
Category: Spreadsheet
Type: Feature Request
2

Dear Concerned,

I have observed that Conditional Formatting in Spreadhseet is not supported. Please add support for the same as it is very important feature of XLSX.  during financial calculation this feature plays an important role. Here is the issue that needs a fix.

1. Open https://demos.telerik.com/kendo-ui/spreadsheet/index

2. Check attached file CellColorFormula.xlsx, conditional formatting set for B2, C2, D2

3. Import attached file CellColorFormula.xlsx

4. Check Cells B2, C2, D2 and try to change values for A2, C2, D2

5. None of the conditional formatting is working

 

Approved
Last Updated: 03 Jun 2019 10:55 by ADMIN
Created by: iFACTS Admin
Comments: 4
Category: Spreadsheet
Type: Feature Request
0

Hi again :)

I see that in the configuration I can specify the max number of rows/column. However, I can do it per component basis, and I would like to have that on a per-sheet basis. Any way I can implement this?

Thanks!

Approved
Last Updated: 31 May 2019 12:35 by Paul

Bug report

When destroying a SpreadSheet and removing its corresponding DOM element, there are some DOM nodes added on SpreadSheet's initialization which are not removed after the execution of .destroy() and .remove().

Reproduction of the problem

  1. Open this Dojo and run it.
  2. Open browser's console and see the output in it. The initial number of the children nodes in the body is 2 and the children nodes after adding and removing a SpreadSheet are 5.
    Nodes_count
  3. Right-click the blank page in right and inspect it. Navigate to the body in the iframe and see the additional nodes in it
    Nodes_count_body

Current behavior

Not all DOM elements added on SpreadSheet initialization are being removed when destroying it and removing its corresponding DOM element.

Expected/desired behavior

After destroying a SpreadSheet and removing its corresponding DOM element, no DOM nodes added on component's initialization should be presented in the DOM tree.

Environment

  • Kendo UI version: 2019.2.514
  • jQuery version: x.y
  • Browser: [all]
Approved
Last Updated: 27 May 2019 10:09 by ADMIN
Created by: Daniel
Comments: 1
Category: Spreadsheet
Type: Feature Request
0
Provide support for images client-side import/export through Telerik Document Processing.
Approved
Last Updated: 22 May 2019 14:20 by ADMIN

Wanting to format a subset of a single cell with text styling different from the rest of the cell contents.  Something like the following:

or

 

Approved
Last Updated: 16 May 2019 08:04 by n/a
Created by: n/a
Comments: 0
Category: Spreadsheet
Type: Bug Report
0

Bug report

File:
3f0465a2-412c-4876-ba47-4b12ae46f92e_adam.zip

https://demos.telerik.com/kendo-ui/spreadsheet/index

Reproduction of the problem

  1. Import the file

Current behavior

Errors are encountered. Even if resolving the errors bold styles are not applied as they are part of the font definition and not of the inlineStyles.

Expected/desired behavior

The excel is imported as expected.

Environment

  • Kendo UI version: 2019.2.514
  • Browser: all
1 2