Approved
Last Updated: 10 Dec 2019 08:54 by ADMIN

1. Open https://demos.telerik.com/kendo-ui/spreadsheet/index

2. Put some text in B2 so that it does not fit in the cell width.

3. Press Wrap Text button 

4. Press Wrap Text again

5.  The row height is not adjusted back to the original height (Excel does it)

Approved
Last Updated: 09 Dec 2019 13:50 by ADMIN
Created by: Naveen
Comments: 0
Category: Spreadsheet
Type: Feature Request
2
Dear Concerned,

1. Open https://demos.telerik.com/kendo-ui/spreadsheet/index

2. Import attached Book1.xlsx. Observe Cell F4 of Sheet1 has a font size of 72.

3. Change it to 8, row height does not change automatically

4. It should be same as Excel behavior


Please provide a fix or any workaround in the meanwhile.
Approved
Last Updated: 10 Dec 2019 11:19 by ADMIN

In the popup edit grid, when the editable: false option is displayed, the portion of the value is at the top rather than horizontal. Can you change it horizontal?
Approved
Last Updated: 06 Dec 2019 16:05 by ADMIN
Created by: Naveen
Comments: 0
Category: Spreadsheet
Type: Feature Request
1

https://demos.telerik.com/kendo-ui/spreadsheet/index

1. Enter some text in a cell.

2. Increase the cell font size to 48.

3. Reduce the cell font size to 8.

4. Double click the row resize handler: the row height is not adjusted to correspond to font size 8.

The same behavior can be observed when opening an existing .xlsx file that has some text and font size set and following steps 3-4.

Approved
Last Updated: 04 Dec 2019 08:45 by ADMIN
Add methods in Kendo UI that convert to and form Excel date number from and to locale date & UTC date.
Approved
Last Updated: 10 Dec 2019 07:40 by ADMIN

Clicking an item in the parent list reveals the child list that replaces the parent list.

At the top of the child list, there is a < back item that allows returning to the parent list.

 

For examples, see the drawers at:

 

See also https://www.telerik.com/forums/kendo-ui-drawer-subitems

Approved
Last Updated: 03 Dec 2019 06:21 by ADMIN
Created by: Trond
Comments: 1
Category: TreeList
Type: Feature Request
1

Hi,

column.values like feature in kendoGrid would be ideal in kendoTreeList.

Thanks

Approved
Last Updated: 29 Nov 2019 09:37 by ADMIN

In some cases, especially when grouping is involved, the day/week/workWeek views may end up with too many events in a single slot. If the total width of those events could not fit within the slot size, those events will overflow and cover some of their sibling events. To avoid such a result, events rendering in a scrollable container should be considered. This way each event will have a minimum width even if it has too many siblings in the same slot.

Here is a Dojo sample demonstrating the case: https://dojo.telerik.com/UnUnUTAW/6

Approved
Last Updated: 26 Nov 2019 12:29 by ADMIN
Created by: Naveen
Comments: 0
Category: Spreadsheet
Type: Feature Request
2
Dear Concerned,

It would be very useful if Kendo can provide two more functions like fromJSON & toJSON in a Spreadsheet as mentioned below

fromStream() - to load an excel file form an Excel stream string so that the developer does not need to convert it to blob etc.

toStream() - to return excel stream string, it would good if it is possible to get stream without blocking UI operation. As of now, we first call toJSON & then call kendo.ooxml.Workbook(jsonSpreadsheetData).toDataURL(); to get excel stream and it is time consuming operation.

Use case: keeping excel file/stream on the server and fetching it using API on UI and then using fromStream to load & render it. And toStream is the same as toJSON to save modified stream back to the server since stream size is very low as compared to json.

Please see if it is feasible to provide these features.
Approved
Last Updated: 25 Nov 2019 08:44 by ADMIN
It would be useful if it is possible to filter between a range of values, like in Excel. For example filter for values that are between 3 and 6.
Approved
Last Updated: 29 Nov 2019 13:51 by ADMIN
Created by: Mark
Comments: 1
Category: Gantt
Type: Feature Request
0

I have a gantt chart with tasks, resources, and assignments. I want to enforce a many-to-one relationship between tasks and resources, that is, I want to be able to assign a single resource to any number of tasks, but each task can only have 1 resource at a time. A (conceptually) simple sample implementation would be to change the checkboxes to a radiobutton in the 'assign' dialog window, from the 'edit' dialog.

I understand there is currently no way to enforce this type of relationship or the restrict the user from selecting more than 1 assignment in the assignment dialog window, so I am requesting a way to do either (or both) of these things. I would imagine a setting in the gantt or taskDataSource for enforcing the relationship, or a setting in the assignment field for switching the dialog box to radio button like behaviour.

Approved
Last Updated: 27 Nov 2019 12:52 by ADMIN

Scenario:

A user deletes an occurence because a few people are ill. Five minutes later the superior enters the office and says the meeting happens anyway. Or the user deletes a wrong occurence.

Resetting the recurrence might not be an option for long running meetings. Like weekly Scrum, project jour fix, ... where the other exceptions should persist. Currently the user has to create a new, separate event.

The exceptions could be rendered as multiselect or list in a separate window which opens after a button click. That way the recurrence editor would not look messy with lots of exceptions.

Approved
Last Updated: 20 Nov 2019 14:57 by ADMIN
Created by: Naveen
Comments: 0
Category: Kendo UI for jQuery
Type: Feature Request
2

Please provide support of row grouping as it is going to be a very useful feature and excel is rich data file so we always need to group various sections. An example of the feature is available in the attached file and the link below.

Example for grouping data in MS Excel

Approved
Last Updated: 22 Nov 2019 15:29 by ADMIN
Created by: EdyTeddy-1975
Comments: 8
Category: ListView
Type: Feature Request
1

Have listview with binded datasource to remote data 64 items.

Need show only 10 of them, and on custom button show 16, after again click 24. like load more button in mobile listview version. But custom button. Dont want server paging. Need all 64 items stored in one shot.

 

thanks for help.

Approved
Last Updated: 26 Nov 2019 07:18 by ADMIN

The FromJson method of Telerik.Web.Spreadsheet.Workbook doesn't add images when a JSON containing an image blob is passed to it. 

It would be nice if the FromJson method supports images.

Approved
Last Updated: 25 Nov 2019 14:47 by ADMIN
Created by: Arun
Comments: 1
Category: Menu
Type: Feature Request
1
I'd like to request the ability to add a public method with the functionality to focus on a specific menu item for navigation purposes.  
Approved
Last Updated: 22 Nov 2019 10:45 by ADMIN

The data item is available to the event arguments of the function handler for shapeDefaults.content.visual function but it is not available to connectionDefaults.content.visual Function. Here is an example illustrating the issue: https://dojo.telerik.com/EMAzeruG

Can it be added?

 

Approved
Last Updated: 22 Nov 2019 12:43 by ADMIN
So as to be able to display and choose from a Fiscal Year, this is to request the ability to set the first week of the year to a date other than Jan 1st.
Approved
Last Updated: 14 Nov 2019 09:13 by ADMIN
Created by: Matthew
Comments: 0
Category: Chart
Type: Feature Request
1

Feature request

The Kendo UI ToolTip exposes the AutoHide functionality. However, this option could not be configured for the labels' tooltip of the Kendo UI Chart

Expected/desired behavior

Be able to configure the AutoHide of the chart's tooltips. When the user hovers out, the tooltip should be persisted until a mouse click is present.

Environment

* **Kendo UI version:** 2019.3.1023
* **jQuery version:** 1.12.4
* **Browser:** [all] 

Approved
Last Updated: 22 Nov 2019 15:31 by ADMIN
Created by: Chris
Comments: 5
Category: TreeList
Type: Feature Request
1

if you look at this dojo (http://dojo.telerik.com/oSOloLuR) the attributes work for kendoGrid.  If you change to a kendoTreeList, the conditional attributes do not work.  Is there a different way to change the attribute?  I tried in the template, but can't set the background-color style in the temple.

Code from dojo with kendoGrid changed to kendoTreeList:

<!DOCTYPE html>
<html>
<head>
    <meta charset="utf-8">
    <title>Kendo UI Snippet</title>

    <link rel="stylesheet" href="http://cdn.kendostatic.com/2014.3.1411/styles/kendo.common.min.css">
    <link rel="stylesheet" href="http://cdn.kendostatic.com/2014.3.1411/styles/kendo.rtl.min.css">
    <link rel="stylesheet" href="http://cdn.kendostatic.com/2014.3.1411/styles/kendo.default.min.css">
    <link rel="stylesheet" href="http://cdn.kendostatic.com/2014.3.1411/styles/kendo.dataviz.min.css">
    <link rel="stylesheet" href="http://cdn.kendostatic.com/2014.3.1411/styles/kendo.dataviz.default.min.css">
    <link rel="stylesheet" href="http://cdn.kendostatic.com/2014.3.1411/styles/kendo.mobile.all.min.css">

    <script src="http://code.jquery.com/jquery-1.9.1.min.js"></script>
    <script src="http://cdn.kendostatic.com/2014.3.1411/js/kendo.all.min.js"></script>
<style>
  .red {
  background-color: red
  }
    .green {
  background-color: green
  }
</style>
</head>
<body>
  
<div id="grid"></div>
<script>
  
var grid = $("#grid").kendoTreeList({
  columns: [ 
    {
    field: "name",
    title: "Name",
    attributes: { "class": "# if(data.name === 'Jane Doe') { # red # } else { # green # } #" }
    },
            {
    field: "title",
    title: "Title"
    }
   ],
  sortable: true,
  dataSource: [ { name: "Jane Doe", title: "Dr. Dr." }, { name: "John Doe", title: "Senior Citizen" }]
}).data("kendoTreeList");
  

  
</script>
</body>
</html>

 

1 2 3 4 5 6