I was wandering around on the internet for the responsiveness of the Kendo UI menu but didn't get success, even I read your forum, someone has posted about this, but you have written that we have not created responsive menu yet.
Please see the attached screenshot
Please create your menu responsive as we need to use in our application.
I'd like the ability to choose the behavior of mutli-row selection on a virtual grid with persisted selection.
For purpose of example, assume we have a virtual grid with 50 rows (pager controls not shown), a page size of 10, and persisted selection.
1. Select row 1 on page 1.
2. Scroll down to trigger page 2 to load (rows 11-20).
3. Select row 11, page 2.
4. Current Behavior: Both row 1 and row 11 remain selected.
5. Desired Behavior: Only row 11 remains selected.
Reasoning: I believe that a virtual scrolling grid should have selection behavior identical to a single page. That means that the only way to add rows to the selection is holding down control/shift during selection. In other words, on page 1 of the above example, if I select row 1, then row 2, only row 2 remains selected. If I select row 1, then Ctrl+click/Shift+click row 2, both remain selected. For virtual scrolling where multiple pages are displayed fluidly as if a single page, it seems odd to have the selection behave differently.
Currently, users are unable to access the footer of the calendar in the DatePicker and the Calendar itself using the keyboard.
Please improve the accessibility of the widget so it can be navigated with the keyboard and read by screen readers.
We are currently in the process of converting our site from using RadAjax controls into Kendo UI controls. We use a lot of drop downs (single select and multi select). While working with the Kendo UI controls, we saw that there were no multi select drop down controls available. There is a multi select control, however it uses a 'token' style and is not a control that we can use in our environment. There should be a multi select drop down control similar to the control used in RadAjax framework.
We need the ability to merge grid rows with the same values (see attached). This is a feature our customers have come accustom to with our Windows UI and the Developer Express toolkit. I understand I can manipulate the rowTemplate to achieve similar results but it is my understanding this will cause issues with row selection, editing, etc... Is this something that can be introduced in the future?
I´m working with Kendo Ui Gantt AngularJS
How to execute the update function and get, again, I need it for a custom function
I need something like that
I would like there to be a simple input field that allows a datasource to be attached. This would support update database operations to be sent as JSON to the desired URL, much like grid or gantt do.
Seems a bit of an oversite that you don't have this on, given the width and breadth of your other controls.
Dear Telerik team.
Currently you use hard coded formats to display dates and times.
majorTimeHeaderTemplate: '<span class=\'k-time-text\'>#=kendo.toString(date, \'h:mm\')#</span> ' + '<span class=\'k-time-period\'>#=kendo.toString(date, \'tt\')#</span>'
It would be nice if you would respect the culture settings and at least I would not have to change the templates every time I use a scheduler.
I didn't check all your widgets, but I guess the scheduler is not the only one ignoring the culture settings.
Please make use of the current culture settings/patterns
Thanks in advance
We are working on enterprise product, which uses Progress Telerik jQuery KendoUI components extensively purchased by our Company. In which Kendo grid is used in many modules of our product.
Now a days we are working on Accessibility (i.e. keyboard and screen reader) as part of out-of-box feature of our product.
The grid has been made accessible so that it can be navigated using the keyboard arrow keys, once it receives focus via Tab Key in order of tab index or Alt + W short cut key. In turn, this has spawned up one issue in terms of keyboard operatibility. You can now tab into the grid, use arrow keys to navigate to the cell containing action buttons and then again tab to the button that you want to activate.
Now due to this, user needing to press the tab key multiple times is an accessibility issue.
Also while referring Grid control demo on https://demos.telerik.com/kendo-ui/grid/editing-inline , we found the same type of behavior when traversing through “Edit” and “Delete” buttons. One of the code snippet developed by us using dojo.telerik.com can be referred on https://dojo.telerik.com/@chiragvidani/ulOzaniX/2
It would be great if this issue is addressed with a good accessible way.
Please find below reply received from on the accessibility forum, when we tried raising the issue to find out the remedial solution:
Reply 1 by "Glen Walker"
Just to make sure we're talking about the right type of component, a grid vs a table, a grid is like a spreadsheet where you can interact with all the cells. I agree that a grid should be a single tab stop so that you can easily navigate to the elements after the grid. However, I have seen implementations that once you're in the grid and in "edit mode", you can tab amongst the cells. This is helpful if the cell contains an element that uses the arrow keys (such as a radio or select) and you want the arrows interpreted by the element and not navigate to the next cell. You then need to get out of "edit mode" (perhaps via the escape key) in order to tab off the grid.
A table, on the other hand, doesn't let you interact with the cell directly but that doesn't mean a cell cannot have an interactive element. That is, you can have links or buttons or inputs in a table cell and it'd still be considered a table and not a grid. It's kind of a fine nuance. A grid lets you interact with the cell itself and a table might let you interact with an element that is in the cell, but not with the cell itself.
There is, of course, more to this than that but I was trying to keep it basic and simple.
So, that being said, do you really have a grid or a table?
Let's say you really have a table instead of a grid, and that one of the cells in your table has several buttons, and that pattern is repeated on every row. You would indeed have a bunch of tab stops, making it difficult to navigate beyond the table.
One possibility is if all the button actions are grouped together, they could be considered a toolbar. A toolbar is one tab stop and you arrow between the buttons, but you'd still have the problem of having a toolbar on every row. A toolbar would reduce the number of tab stops compared to having all separate buttons but you'd still have X number of tab stops for X rows. One for each toolbar.
Maybe a grid in that case would be better. Tab to the grid, tab again to whatever element follows the grid. Tab back to the grid and use the arrow keys to navigate to the desired row. Maybe the row goes into "edit mode" automatically when it receives focus with the arrow and then all the interactive elements in the row get a tabindex of 0.
That might be a bit non-standard and there probably isn't a good "role" to explain the behavior. A bit of usability testing might be required.
In my testing of utilizing the spreadsheet component and starting off with for example 100 rows in the configuration options, using insert row typically seems to shift the data down (if you have anything below the cursor). It does not actually increase the number of rows in the sheet.
For example if I initialize the spreadsheet with the following info:
This will create the spreadsheet with 100 rows and columns A-Z as expected.
Now going anywhere in the sheet (or the end) and inserting a row above/or below will not add row 101, 102, 103, etc. In fact, if you are in the very last row and hit insert row below it will come up with a message regarding a possible loss of data.
A couple things I have tried:
So with that said, is it at all possible to actually add a row to the sheet as one would expect the behavior to be. This obviously still needs to call the internal functions to recalculate the ranges and data throughout the sheet; but somehow re-fresh or re-render the UI component (just calling render again doesn't fix it).
I appreciate your help with this.
It would be nice if additional template variables where available, the only two: pageNum & totalPages are not enough.
Consider Time of Day & Filename at a minimum.
i have a grid with a lot of data for a better representation i show some related values with a template in the cell below each other.
This solution is not optimal because I don't have the filter and sort function in the column header for every single field.
Enclosed an example https://www.igniteui.com/grid/multi-row-layout which illustrates my wish.
I would be happy if you implement this feature in a future release.
Put a KENDO Upload for JQUERY sample folder because not exits into the zip of current comercial version and internal version than KENDO Upload MVC it exist.. The idea is explain how to implement a web api across kendo upload/ saveurl /save ???