Pending Review
Last Updated: 16 Oct 2019 10:26 by Martin
Created by: Martin
Comments: 0
Category: Grid
Type: Feature Request
0

Currently, you cannot disable all columns in the column menu - it requires that at least one column is enabled.

However, if the grid contains any non-hidden columns which have IncludeInMenu=false, then it should be possible to disable all the remaining columns using the column menu.

 

 

Pending Review
Last Updated: 16 Oct 2019 06:02 by Seuthes
Created by: Seuthes
Comments: 0
Category: Spreadsheet
Type: Feature Request
1

It would be great if you would add accessabbility to the spreadsheet as it seems to be the last control without this feature.

Currently the focus gets trapped inside its grid and the user cannot leave the spreadsheet with the TAB key. At least this should be avoided. It would be also better if only the first cell would be focusable and you then could navigate with the arrow keys, as with thousands of cells it is not very comfortable to use the TAB key.

Approved
Last Updated: 15 Oct 2019 07:02 by ADMIN

Excel supports deselecting cells from selected ranges, e.g. selecting a range from cell A1 to A10 results in a range A1:A10. Then deselecting cell A5 from that range produces two new ranges - A1:A4 and A6:A10.

Now a more complex example - selecting multiple ranges with intersecting cells - A1:B10, A5:D10, A9:C14 and A9:G9.


Deselecting cell B9 in Excel produces a new range with cell A9 only and then a range C9:G9. And B9 should be excluded from the other 3 ranges.

Currently the Spreadsheet widget does not know how to do this. There is no logic to decide what new ranges should be created on such operation. What it currently knows is creating new ranges and these ranges may overlap. Thus clicking on cell B9 creates a new range with cell B9, instead of deselecting B9 from the already selected ranges.

Pending Review
Last Updated: 11 Oct 2019 11:21 by Hitendra
Created by: Hitendra
Comments: 0
Category: Chart
Type: Feature Request
1

Hi Team,

It would be nice to have a feature in Charts were we can drag and drop the series points especially with Line & Bar charts. This will allow the end user to interact with data visually.

Here is the example link: https://jsfiddle.net/gh/get/library/pure/highcharts/highcharts/tree/master/samples/highcharts/dragdrop/resize-column

 

Thank You,

Hitendra

Pending Review
Last Updated: 10 Oct 2019 11:32 by Sujeet
Created by: Sujeet
Comments: 0
Category: Gantt
Type: Feature Request
1

Hi,

I am using kendo's Gantt chart. But I unable to achieve few things using the existing Gantt chart features.
Following are the features I request should be provided for Gantt chart:

  1. Multiple tasks/milestones in a row.
  2. Multiple rows for a parent task.
  3. If space is not available in preceding row(s), overlapping tasks should be moved to next row.
  4. User should be able to provide start date for the quarter in a fiscal calendar. Ex: If user give 01st-June as the start date, then Q1 should start from 01st-June. Hence, quarters will be defined as: Q1(June-Aug), Q2(Sept-Nov), Q3(Dec-Feb), Q4(Mar-May)

Gantt chart requirement point 1-4

Refer above image for point 1-4

 

       5. If task label is exceeding the width of the task, then height of the task should be increased to accommodate task label(in other words, text should            be wrapped). Also, font-size of the text should be responsive, that is, font-size should be reduced to accommodate entire text in minimum task height.

Gantt chart Requirements point 5

Refer above image for point 5

 

Approved
Last Updated: 09 Oct 2019 15:24 by ADMIN
Created by: David
Comments: 1
Category: MultiSelect
Type: Feature Request
1

There is no way to sort the selected items inside the MultiSelect

It would be nice to have such functionality implemented or provide an implementation that can achieve the described functionality.

Pending Review
Last Updated: 15 Oct 2019 14:16 by Lee
Created by: Lee
Comments: 2
Category: Chart
Type: Feature Request
4
I would like a built in vertical scrollbar or other visual indicator on bar charts that can be panned or scrolled.
Approved
Last Updated: 11 Oct 2019 07:50 by ADMIN

If you open the popup of the above components and resize the browser window with the popup still opened, the component is being resized according to the window size but the popup keeps its initial width. 

The above scenario can be observed on this link: https://dojo.telerik.com/ovOTUDeV 

Approved
Last Updated: 07 Oct 2019 07:46 by ADMIN

Hi.

kendoGrid Pager has a feature of disabling focus of pager arrows with a tabindex="-1".

I was able to override this behavior in some cases. But sometimes it becomes tricky to override this behavior.

My question is:

"Is it possible to disable this behavior, not to override it but really disable. Or if not - maybe you have plans to add such an option in the future (maybe I can submit to the feature updates somewhere)?"

Approved
Last Updated: 04 Oct 2019 05:40 by ADMIN
Created by: Bilal
Comments: 0
Category: PDFViewer
Type: Feature Request
1

I have experience with OpenText Brava Enterprise. I've had the chance to integrate their Viewer in our in-house document management system. This viewer opens up to 100 file formats and allows to add/remove/edit annotations on files and saves these annotations as a separate layer on top of the file. So next time you open the same file to view, you can load the annotations (via API) calls and place the layer of annotations on top.

I was hoping I would see the same thing with Telerik PDF Viewer (and I am aware this works only for PDF). To allow the user to add a Text comment, Shapes, Stamps, Image, PDF Bookmark, etc.

Approved
Last Updated: 10 Oct 2019 07:44 by ADMIN
Created by: Mat
Comments: 0
Category: Filter
Type: Feature Request
1

There are occasions when the out-of-the-box filter operators can't be used, such as filtering on nested objects. In these situations I use a custom function for the filter operator.

It would be great if the Filter widget could support custom filter operators.

I realise this would be challenging, as it would break the save/load state function and would be difficult to handle in the expressionPreview.

Approved
Last Updated: 10 Oct 2019 04:37 by ADMIN

I'd like to request the functionality to change the multiple selection process of the Kendo UI Grid to be the same as Excel.  For example, the following shows a block of cells selected instead of all of the cells in-between the selected cells from Shift+Clicking:

Thank you!

Approved
Last Updated: 02 Oct 2019 11:24 by ADMIN
Created by: SAM
Comments: 0
Category: Data Source
Type: Feature Request
1

When the grid is configured for working with UTC on the server-side, the value sent from the filter menu on the client-side would not be properly sent to the server. 

If the stringifyDates option of the transport of the data source is set, the value would still be sent in a localized date format without information for the time zone, for instance, GMT(+0300).

In case the value sent from the client is modified, the parameterMap would be called afterward and would override the modified value. 

Moreover, the Kendo UI Binder on the server-side is not configured to be working with dates that have additional data for the time zone appended to the end. Therefore, sending the modified data would not be parsed correctly and FormatException error would be thrown.

Approved
Last Updated: 04 Oct 2019 11:46 by ADMIN
Created by: Dennis
Comments: 0
Category: Editor
Type: Feature Request
1

Currently, the images in the Editor component are being handled as base64 code. Inserting larger images could cause browser issues. 

This is why it will be nice if there is a built-in functionality that enables configuration options to setup upload for images on Drop/Paste upload and insert links to the destination path.

Features of this functionality:

  • Show progress bar for the images being uploaded
  • Add configuration which can set the URL to the destination of the uploaded images for the links
Pending Review
Last Updated: 02 Oct 2019 06:24 by Srinivas Pulipaka
Created by: Srinivas Pulipaka
Comments: 0
Category: Grid
Type: Feature Request
1

At the moment only the Kendo UI Grid with enabled mobile option will generate a header which can react to the touch and hold gesture.

This makes column resizing impossible when a web grid is used on mobile/tablet. Can you check internally if the grid is used on a mobile browser and create the mobile headers that work with the touch and hold gesture even when the grid does not have the mobile property enabled. This should work out of the box for all grids:

https://docs.telerik.com/kendo-ui/controls/data-management/grid/appearance/adaptive#resizing-of-columns

Approved
Last Updated: 01 Oct 2019 13:06 by ADMIN
Created by: Vaishali
Comments: 1
Category: Gantt
Type: Feature Request
1

Implement support for external editor in the Gantt. Instead of using an editor template or calling the editTask method, make possible Gantt tasks to be updated without opening the default editor.

A modification in a child task, e.g. changing its start date, should also update the summary task.

Approved
Last Updated: 08 Oct 2019 07:01 by ADMIN
Created by: Mat
Comments: 1
Category: Filter
Type: Feature Request
1

Hi Team,

When a date filter is applied in the new Filter widget, the preview looks like: "Date Is After 'Tue Jan 01 2019 00:00:00 GMT+0000 (Greenwich Mean Time)'" -- I'd like to be able to customize the displayed date format, something like adding "format:"{0:dd/MM/yyyy}" to the 'fields' object.

Thanks

Approved
Last Updated: 30 Sep 2019 12:34 by ADMIN
Created by: Peter
Comments: 1
Category: Grid
Type: Feature Request
0

As followup on Ticket ID: 1431527 screenshots and sample code provided.

"The GridColumnBuild does not have an implementation for the Locked functionality against the dynamic type. The class that gets serialized and sent to the client-side would not have a property for the locked column, therefore, there would be no locked columns."

Can you please examine this functionality?

 

Best,

Peter

Approved
Last Updated: 03 Oct 2019 10:44 by ADMIN
Created by: Bridge24
Comments: 4
Category: Grid
Type: Feature Request
3

Hi, we use the grid "toolbar" property.  But, we found that the documentation of the kendoToolBar "standalone" offers more possibilities, like adding a type "separator", groups, toggle, ...

My question is:
When I create my grid, is it possible to get a reference to its containing kendoToolBar (if it's a complete kendoToolBar ?), that allow to add more complex items.

Something like: 

var kgrid = $('#grid1').kendoGrid({toolbar: [...]}).data("kendoGrid").

var kToolbar = $('#grid1 .k-grid-toolbar').data("kendoToolBar") // or kgrid._secret_property?

kToolbar.add({type: "separator"})

I tried that, but the kToolbar is undefined.

 

Declined
Last Updated: 04 Oct 2019 12:05 by ADMIN
Created by: Hari Kishan
Comments: 1
Category: Gauge
Type: Feature Request
1
Hi Team,

For future releases, I would like to request adding the ability to set an image in the Range instead of a solid color.  For example, instead of the Grey, Yellow, Orange, and Red color in this live demo, use images.
1 2 3 4 5 6