Completed
Last Updated: 02 Feb 2017 15:52 by ADMIN
You can create a list item, but it is impossible to type text in the list item.
Completed
Last Updated: 02 Feb 2017 14:31 by ADMIN
Toolbar icons are missing in Image Manager dialog when custom content provider is used
https://www.screencast.com/t/VQyEb8tn
Completed
Last Updated: 02 Feb 2017 14:30 by ADMIN
The Properties tab in Image Manager dialog Preview tab appear as blank when custom content provider is used.
Completed
Last Updated: 19 Jan 2017 11:38 by ADMIN
IE8 and 9 freeze when trying to do a ReplaceAll in HTML mode and the string to find is very short - easiest way to reproduce is using a single letter.
Won't Fix
Last Updated: 19 Jan 2017 09:41 by ADMIN
When a new anchor is created and an anchor name is set via the Hyperlink Manager tool of RadEditor, the 'name' attribute will not be applied under IE7. Under IE8 the specified anchor name is set to a 'submitname' attribute of the anchor element.
Completed
Last Updated: 19 Jan 2017 09:39 by ADMIN
When the content of the editor is within a SPAN element, nested in a P, pasting data with P element inside it using the pasteHtml() method throws JavaScript errors and the SPAN element is broken by the nested P elements.

Steps to reproduce:
1.Set editor's content with this content: <p><span>Some text</span></p>

2.Use the editor's pasteHtml() method to paste this HTML in the middle of the above text: <p>Second text</p>

3.The result HTML is this:
<P><SPAN>Some</P>
<P>Second text</P>
<P>&nbsp;text</SPAN><SPAN>​</SPAN></P>

 
Completed
Last Updated: 19 Jan 2017 09:38 by ADMIN
When a RadEditor control is set to a small height and ContentAreaMode='DIV' resizing the wrapper causes the size calculation functionality to break, because the calculated value is negative.  
Approved
Last Updated: 13 Jan 2017 11:25 by ADMIN
The browser becomes not responding when pasting content with a lot of span elements in IE11 in RadEditor Design view.

You can reproduce it in the following demo: http://demos.telerik.com/aspnet-ajax/editor/examples/workingwithlargecontent/defaultcs.aspx
Approved
Last Updated: 11 Jan 2017 08:04 by ADMIN
The Table Wizard dialog, the Table Properties tab shows Cell Padding and Cell Spacing fields, but this fields can only apply values. If you edit them through the HTML mode or the Properties Inspector module, the fields in Table Properties dialog will not be updated.
Approved
Last Updated: 05 Jan 2017 09:26 by ADMIN
ADMIN
Created by: Rumen
Comments: 0
Category: Editor
Type: Bug Report
1
There is a problem in Safari on Mac while selecting Table cell properties via the context menu when a table cell is selected. Its Wrongly selected in the Table Wizard window.

Reproduction steps:

- Load the default demo in Safari Mac: http://demos.telerik.com/aspnet-ajax/editor/examples/overview/defaultcs.aspx

- Right click over the third cell in the second column ("Los Gigantes is located...") and choose Cell Properties.

- The Preview of the Cell Properties in the Table Wizard will show that the first cell is selected but not the right one.

Completed
Last Updated: 21 Dec 2016 05:58 by ADMIN
Setting render mode to auto or lightweight via the web.config does not affect the rendering of RadEditor with markup that is used with FileManager's composite properties. For example, ImageManager-MaxUploadFileSize, ImageManager-ViewPaths, etc. 


For the time being, you can explicitly set the RenderMode property of RadEditor to either Auto or Lightweight in order to resolve the problem. 
Completed
Last Updated: 19 Dec 2016 13:56 by ADMIN
In IE, create a table and add a caption

Apply the style="display: none" to the caption

Attempt to select table using the Editor's select table function and an unspecified error is thrown in the console

This issue was reproduced on the RadEditor demo page.

This issue only happens in IE, could not reproduce in Firefox or Chrome.

This issue does not occur when the display: none style is removed from the caption.

Video: http://www.screencast.com/t/QxHb25w6e

Completed
Last Updated: 19 Dec 2016 13:53 by ADMIN
ADMIN
Created by: Marin Bratanov
Comments: 0
Category: Editor
Type: Bug Report
0
A workaround is to add the following CSS rules to the DialogsCssFile stylesheet:

.reLightweightDialog.RadForm_BlackMetroTouch.redLinkManager body,
.reLightweightDialog.RadForm_Bootstrap.redLinkManager body
{
	width: 540px;
	height: 540px !important;
}

/*or use that, which will affect all skins: */
/*.reLightweightDialog.redLinkManager body
{
	width: 540px;
	height: 540px !important;
}*/
Approved
Last Updated: 13 Dec 2016 08:43 by ADMIN
Completed
Last Updated: 30 Nov 2016 14:15 by ADMIN
This issue happens only on Macs with Chrome and Safari.

It is related to the IME (input method editor) that is used to enter Japanese (Hiragana) words with Latin keyboards. Such an IME is provided by Windows and the Mac operating system. Part of the process to enter Japanese text is to enter several characters, then press the space bar to get a popup list of suggestions for potential words. The space bar is then pressed again until the desired word is highlighted. Then the user will press return to select the correct word. The user then presses the next characters to build the next word.

If you need more information about typing Japanese text you can find a description here: https://www.coscom.co.jp/learnjapanese801/howjpdo.html

The bug with RadEditor can be demonstrated with the current RadEditor demo page. (http://demos.telerik.com/aspnet-ajax/editor/examples/overview/defaultcs.aspx) 

To recreate the problem you can go to your RadEditor demo page with Chrome or Safari on a Mac. You will need to enable the Japanese IME in your operating system. This is very easy to do and you can just do a Google search for instructions if you need to.

Then delete all example text. 

Now press the following keys on an English keyboard:

s a t e l o    

(each 2 key combination creates a Japanese character)

You will now see 3 Japanese characters. Now press the space bar. This will open the word selection list. Now press the space bar again, which should select the next words from the list. But instead of selecting the next word, the popup list is immediately closed and some different character are inserted in the content. If you then press another key the content gets completely destroyed and replaced with the key that was pressed. It does not work as expected and it is unusable that way.

If you try the same key sequence with Firefox on a Mac or any browser on a PC you will see how it is supposed to work.

The same problem happens if you would use the cursor down key (instead of the space bar) to select the next item in the list.

The affected browsers work as expected in regular input / textarea fields. It seems to happen only with Telerik's RadEditor control. To narrow down the cause even further I created a JSFiddle demo with a simple control that has the attribute contenteditable=true set. I believe that RadEditor is based on such a control and I wanted to see if the affected browsers may have problems with this HTML feature itself. You can try the JSFiddle demo here: https://jsfiddle.net/q5Lsnjmg/3/     The result is that the affected bowsers work as expected in this demo. This seems to indicate that the Telerik editor control must do something different to trigger this problem.

I also created a video that demonstrates the issue. You can see the video here: https://youtu.be/ANLbXpm5Zko
Completed
Last Updated: 25 Nov 2016 15:48 by ADMIN
Thead and tfoot elements get deleted with deleting content of table in Google Chrome.

On the RadEditor demo page [http://demos.telerik.com/aspnet-ajax/editor/examples/overview/defaultcs.aspx]

Replace the content with a table with a thead tbody tfoot caption

<table>
   <caption>ABC</caption>
   <thead>
      <tr>
         <th>A</th>
         <th>B</th>
         <th>C</th>
      </tr>
   </thead>
   <tfoot>
      <tr>
         <td>FOOT</td>
         <td>FOOT</td>
         <td>FOOT</td>
      </tr>
   </tfoot>
   <tbody>
      <tr>
         <td>A1</td>
         <td>B1</td>
         <td>C1</td>
      </tr>
      <tr>
         <td>A2</td>
         <td>B2</td>
         <td>C2</td>
      </tr>
      <tr>
         <td>A3</td>
         <td>B3</td>
         <td>C3</td>
      </tr>
   </tbody>
</table>

Select some content across the tbody, tfoot, thead and caption and delete 

Expected results: the content of the TD and TH should be remove

Actual results: the THEAD and TFOOT elements are removed

More details check the attached delete_thead_tfoot.gif file.

Workaround: 
<telerik:RadEditor ID="RadEditor1" runat="server">
</telerik:RadEditor>

<script>
	(function () {
		var $E = Telerik.Web.UI.Editor;
		var utils = $E.Utils;
		var cmdPrototype = $E.DeleteSelectionCommand.prototype;
		var shouldCollectNode = cmdPrototype.shouldCollectNode;
		cmdPrototype.shouldCollectNode = function (node) {
			return shouldCollectNode.call(this, node) && !utils.isTag(node, "thead") && !utils.isTag(node, "tfoot");
		};
	})();
</script>
Approved
Last Updated: 21 Nov 2016 15:41 by ADMIN
The context menu for IMG and Table element immediately hides when shown on Mac Firefox.

Load this demo http://demos.telerik.com/aspnet-ajax/editor/examples/overview/defaultcs.aspx on Firefox Mac OS
and right click in a table cell or image. You'll see how the menu pops up and immediately closes.

Video reproduction -> http://www.screencast.com/t/osHP96eQOa7


Approved
Last Updated: 14 Nov 2016 14:58 by ADMIN
The empty new lines from RTF are imported as empty paragraphs in the editor and not rendered, i.e.

<p class="TelerikNormal" style="line-height: 16px;"> </p>
<p class="TelerikNormal" style="line-height: 16px;"> </p>
<p class="TelerikNormal" style="line-height: 16px;"> </p>
<p class="TelerikNormal" style="line-height: 16px;"> </p>
<p class="TelerikNormal" style="line-height: 16px;"> </p>


They should be rendered, because in other case this breaks the layout of the inserted document.


Completed
Last Updated: 02 Nov 2016 14:15 by Clintrak_it
Completed
Last Updated: 02 Nov 2016 10:43 by Shane
When a partially copied table is pasted into the Editor in Chrome, it is pasted wrapped in the folloing div, making it not visible:

<div class="telerik_paste_container" style="border-width: 0px; position: absolute; overflow: hidden; margin: 0px; padding: 0px; left: 3px; top: 215px; width: 1px; height: 1px;">
...
</div>


Steps to reproduce:
1. Open http://demos.telerik.com/aspnet-ajax/editor/examples/overview/defaultcs.aspx
2. Clear the contents of the editor
3. Insert a table (any configuration of rows and columns) 
4. Go to a new line
5. Type a word on the new line
6. Select the word and a partial amount of the inserted table
7. Copy
8. Paste
9. Navigate to the HTML browser of the editor
10. Observe the "telerik_paste_container" still wrapping the pasted content

Workaround:
<telerik:RadEditor ID="RadEditor1" runat="server">
</telerik:RadEditor>

<script type="text/javascript">
	var editorPrototype = Telerik.Web.UI.RadEditor.prototype;
	var onAfterPaste = editorPrototype._onAfterPaste;
	editorPrototype._onAfterPaste = function (range, tmpPasteContainer) {
		try {
			onAfterPaste.call(this, range, tmpPasteContainer);
		} catch (e) { }
		$telerik.$(this.get_contentArea()).find(".telerik_paste_container").remove();
	};
</script>