Pending Review
Last Updated: 07 Jul 2018 20:47 by Michael
Created by: Michael
Comments: 0
Category: Grid
Type: Feature Request
2
The ability to freeze columns on the left in a RadGrid is a great feature.  However freezing them from both the left AND right would be even better.

I have a scenario where the far left column in a date field (which is frozen and works great).  Then there are about 30 columns that scroll.  The final column is a "totals" column for that week, and it would be great if that was frozen on the right so I don't need to scroll all the way over to see that column...

Pending Review
Last Updated: 28 Jun 2018 13:27 by ADMIN
ADMIN
Created by: Peter Milchev
Comments: 0
Category: Slider
Type: Feature Request
0
When scrolling the page and the finger is on the slider, the slider value changes.

The following code prevents the scrolling when you scroll from the slider.

function pageLoadHandler() {
    $telerik.$(".RadSlider").on('touchstart', function (e) {
        e.preventDefault();
    });
}
Sys.Application.add_load(pageLoadHandler);
Pending Review
Last Updated: 25 Jun 2018 09:44 by ADMIN
Repro steps: 
- use the editor below and the attached Word document in the archive at the end
- copy the document content in the editor
- clean the word formatting
- select some of the content (e.g., one paragraph)
- click the format stripper dropdown and choose Strip Span Elements
- run get_html(true) in the console

Expected: spans are stripped only from the selected content

Actual: nothing is stripped. Changing to HTML mode and back to Design fixes this, so you should not use that to check the HTML

        <telerik:RadEditor RenderMode="Lightweight" runat="server" ID="RadEditor1">
            <Tools>
                <telerik:EditorToolGroup>
                    <telerik:EditorTool Name="FormatStripper" />
                </telerik:EditorToolGroup>
            </Tools>
        </telerik:RadEditor>


WORKAROUNDS:

For the majority of cases you can set up automatic stripping of span elements when pasting from Word, so your users do not need to do that themselves. Here is an example:

<telerik:RadEditor RenderMode="Lightweight" runat="server" ID="RadEditor1"
    StripFormattingOptions="ConvertWordLists, MSWordNoMargins, Span">
    <Tools>
        <telerik:EditorToolGroup>
            <telerik:EditorTool Name="FormatStripper" />
        </telerik:EditorToolGroup>
    </Tools>
</telerik:RadEditor>

You can read more on how stripping MS Word content works in the following demo, and play around with the various options to see what works best for your case: http://demos.telerik.com/aspnet-ajax/editor/examples/cleaningwordformatting/defaultcs.aspx and in the following documentation article: https://docs.telerik.com/devtools/aspnet-ajax/controls/editor/managing-content/pasting-content/clean-ms-word-formatting

There are also two possible code workarounds so advanced users can retain more control over the HTML without switching to the HTML mode themselves.
The second is likely to be a tad faster with large content, but the first is likely to produce better user experience.

1) this changes the mode to HTML and back to design with each paste so that the stripping tool can work with the selection


<telerik:RadEditor RenderMode="Lightweight" runat="server" ID="RadEditor1"
     OnClientCommandExecuted="OnClientCommandExecuted">
    <Tools>
        <telerik:EditorToolGroup>
            <telerik:EditorTool Name="FormatStripper" />
        </telerik:EditorToolGroup>
    </Tools>
</telerik:RadEditor>
<script>
    function OnClientCommandExecuted(sender, args) {
        if (args.get_commandName() == "Paste") {
            sender.set_mode(2);
            setTimeout(function () {
                sender.set_mode(1);
            }, 50);
        }
    }
</script>

2) this one is a workaround that allows the stripping tool to work without mode change, but it will not operate with the selection but with all the content


<telerik:RadEditor RenderMode="Lightweight" runat="server" ID="RadEditor1"
     OnClientCommandExecuting="OnClientCommandExecuting">
    <Tools>
        <telerik:EditorToolGroup>
            <telerik:EditorTool Name="FormatStripper" />
        </telerik:EditorToolGroup>
    </Tools>
</telerik:RadEditor>
<script>
    function OnClientCommandExecuting(sender, args) {
        if (args.get_commandName() == "StripSpan") {
            sender.set_html(sender.get_html(true));
        }
    }
</script>
Pending Review
Last Updated: 25 Jun 2018 06:56 by Attila Antal
ADMIN
Created by: Attila Antal
Comments: 0
Category: Grid
Type: Feature Request
1
Default values are provided for fields with non-string type in insert mode when RadGrid is bound using Model Binding. The reason behind it, is that the Insert item of the RadGrid is being bound similar to the edit Item and values are then provided by the framework.

Please create an option to remove the default values when inserting a new record.
Pending Review
Last Updated: 22 Jun 2018 17:18 by Alla
Created by: Alla
Comments: 0
Category: Scheduler
Type: Feature Request
2
Please add holiday functionality to RadScheduler - for ASP.NET Ajax, similar like you did for WinForms. Thanks!
Pending Review
Last Updated: 22 Jun 2018 07:05 by Nicolas
Using Entity Framework Code First and model binding in a RadGrid, in insert row there is a default value for all non-string types that are not nullable.

For example "0" for Int or Decimal, "01/01/0001" for Date, etc...

So we have to make code to clear these values in textboxs or make SQL requests to give a default value to RadComboBoxs linked to a Foreign Key.

This does not happens using a FormView and model binding.
This does not happens using a RadGrid and EntityDataSource .

Please make an option to let all controls blank in insert mode without doing code !
Pending Review
Last Updated: 06 Jun 2018 16:40 by juanPablo
Created by: SWAT
Comments: 1
Category: UI for ASP.NET AJAX
Type: Feature Request
3
It will be nice to have a countDown control with all the client/server events and the suite skins, which will enable the developer to show a visitor with a timer to complete a task (like finsih a purchase with a guranteed price for few minutes) and call a web service when the timer got to zero, and show a message to the client (with integrated Notificatoin object) about the price (changed or staed the same etc.) and let the developer decide if he wants to start the timer again or not.

Thanks,
ilan.
Pending Review
Last Updated: 30 May 2018 08:28 by Arnstein
Created by: Arnstein
Comments: 4
Category: Grid
Type: Feature Request
4
In RadGrid, we can use the ClientSettings.Scrolling.UseStaticHeaders property to have a fixed header when scrolling the grid. This requires a fixed height of the grid. However, what if we do not want a fixed height of the grid, but rather want the grid to flow down the page, using as much space as necessary do display its records. In such a scenario, the grid header will disappear when we scroll down the page.
I have implemented a kind of fix for this in one of my projects. Instead of trying to explain how it works, I have prepared an example. You can find it here:
http://www.ifag.no/RadGridHeader.aspx
Maybe some of you can suggest even better solutions to the scenario I have described. Comments are welcome!
Pending Review
Last Updated: 29 May 2018 11:44 by Kavitha
Created by: Kavitha
Comments: 0
Category: Grid
Type: Feature Request
1
Hello,

I have Radgrid with editable & non editable columns. I edit a row.

If I click an editable cell, it places the cursor within the editable cell. Its correct.

But if I click a readonly cell, it places the cursor in the first editable cell of the line. If the readonly cell is the last cell of the line and if I click the readonly cell, it places the cursor in the first editable cell. If the grid column width is very large, the grid is scrolled to show the first editable cell, and I loose the data which I am visualizing.

If I click in readonly cell, I want to open all the editable cells of the line, but the page should remain in same place. I don't want to place the cursor in any of the editable cells of the line. 

Example grid:
I have a simple Radgrid with batch mode and edit type row.
I have 3 columns id,name and age.
Id and name columns are editable columns. Age column is non editable column.
If I click on age column which is  non editable , the focus moves to id column, which is the first editable column.
If there many columns in my grid and if I click the last  non editable  column, the grid scrolls to first editable column, and I lose the focus of data which I am seeing.
If I click in  non editable column, I want the grid to remain in same place.

This feature can be added as an option by adding property of grid ForceFocusinEdit.
When ForceFocusinEdit= true, if we click in readonly column, focus moves to first editable column.
When ForceFocusinEdit = false, if we click in readonly column, focus is in clicked cell.

Please refer to Ticket ID: 1168296 for more informations.
Thank you
Pending Review
Last Updated: 15 May 2018 16:44 by Albert Shenker
Created by: Albert Shenker
Comments: 0
Category: Grid
Type: Feature Request
1
Create a FilterControlEmptyMessage property so users can set an empty message in the grid filter textbox, much like the EmptyMessag property of RadTextBoxes.

Ideally make it so this property can be accessed/modified client and server-side.
Pending Review
Last Updated: 12 May 2018 10:01 by Rohit
Hi,
Please suggest me how can we show only working hour in timeline view in rad scheduler and hide non working hour. 

Currently in timeline view all 24 hour time slot is showing , but I want to show only working hour in time slot and hide rest of non working hour for there.

Screen shot for current view and desired view is attached below .
Pending Review
Last Updated: 03 May 2018 18:04 by Imported User
The aggregates functions highlighted in the attached screenshots have common names that are used in the industry and as such they are not localized. This feature request is so that their names can be localized through global resx files along with other strings in the RadPivotGrid control.

In the meantime, you can use the ItemDataBound event to change cell texts based on your requirements. You can find similar examples here: https://demos.telerik.com/aspnet-ajax/pivotgrid/examples/appearance/conditionalformatting/defaultcs.aspx
For example, to change the Sum aggregate name in the column header, you can do this:
            else if (e.Cell is PivotGridColumnHeaderCell)
            {
                PivotGridColumnHeaderCell cell = e.Cell as PivotGridColumnHeaderCell;
                cell.Text = cell.Text.Replace("Sum ", "custom ");
Pending Review
Last Updated: 06 Apr 2018 18:06 by Grant
ADMIN
Created by: Marin Bratanov
Comments: 1
Category: Grid
Type: Feature Request
4
The behavior described in the following KB should be fixed https://www.telerik.com/support/kb/aspnet-ajax/grid/details/horizontal-scroll-speed-is-slow-with-static-headers

In the meantime, you can use the workarounds from the article, or, if it fits your scenario, move to scrolling horizontally through frozen columns via the Prev/Next buttons the grid can provide. You can find an example of that in the second grid (Navigate through the columns by clicking on the Prev/Next buttons) in the following demo: https://demos.telerik.com/aspnet-ajax/grid/examples/columns-rows/columns/frozen-columns/defaultcs.aspx
Pending Review
Last Updated: 29 Mar 2018 13:14 by Lou
The ASP.Net RadScheduler does not currently support recurring events in minute intervals (for example, every 15 minutes). Please add support for this. The feature would behave similarly to the feature in WinForms RadScheduler (Winforms RadScheduler does support minute interval recurring events). Thank you.
Pending Review
Last Updated: 27 Mar 2018 22:59 by ADMIN
ADMIN
Created by: Rick
Comments: 0
Category: Grid
Type: Feature Request
0
Please provide the ability to customize the way filtering works when RenderMode=Mobile.

Allows for template filtering, and ColumnHeader filtering similar to Lightweight rendering.
Pending Review
Last Updated: 19 Mar 2018 14:57 by ADMIN
ADMIN
Created by: Peter Milchev
Comments: 0
Category: Gantt
Type: Feature Request
1
Allow setting a client template for the task's tooltip. 

Workaround: https://www.telerik.com/support/code-library/custom-task-tooltip
Pending Review
Last Updated: 19 Mar 2018 14:35 by ADMIN
ADMIN
Created by: Peter Milchev
Comments: 0
Category: Gantt
Type: Feature Request
1
Currently, the RadGantt allows only format strings as a value for the WeekHeaderDateFormat property. 

Use case - show week number instead of the dates. 

Workaround to show week number: The suggestion is based on the https://demos.telerik.com/aspnet-ajax/gantt/examples/accessibility-and-internationalization/localization/defaultcs.aspx demo. 

What you should add to the Gantt markup declaration is the WeekView-WeekHeaderDateFormat="dd/MM/yyyy" and OnClientDataBound="OnClientDataBound" properties. 

// https://stackoverflow.com/questions/6117814/get-week-of-year-in-javascript-like-in-php
function getWeekNumber(d) {
    // Copy date so don't modify original
    d = new Date(Date.UTC(d.getFullYear(), d.getMonth(), d.getDate()));
    // Set to nearest Thursday: current date + 4 - current day number
    // Make Sunday's day number 7
    d.setUTCDate(d.getUTCDate() + 4 - (d.getUTCDay() || 7));
    // Get first day of year
    var yearStart = new Date(Date.UTC(d.getUTCFullYear(), 0, 1));
    // Calculate full weeks to nearest Thursday
    var weekNo = Math.ceil((((d - yearStart) / 86400000) + 1) / 7);
    // Return array of year and week number
    // return [d.getUTCFullYear(), weekNo];
    return weekNo
}
function OnClientDataBound(sender, args) {
    if (sender.get_viewsData()[sender.get_selectedView()].type == "week") {
        $telerik.$('.rgtTimelineWrapper thead>tr:first .radHeader', sender.get_element()).each(function (index) {
            var $this = $(this)
            var datestring = $this.text().substring(0, 10);
            var date = new Date(datestring);
            var weekNumber = getWeekNumber(date)
            $this.text("Week " + weekNumber)
        })
    }
}
Pending Review
Last Updated: 19 Mar 2018 13:49 by ADMIN
ADMIN
Created by: Peter Milchev
Comments: 0
Category: Gantt
Type: Feature Request
1
Allow the implementation of Custom views or extending the available ones similar to the Kendo UI Gantt - https://docs.telerik.com/kendo-ui/controls/scheduling/gantt/how-to/creating-custom-view
Pending Review
Last Updated: 16 Mar 2018 13:31 by ADMIN
ADMIN
Created by: Peter Milchev
Comments: 0
Category: Gantt
Type: Feature Request
1
Similar to what we have in other controls, when there is are no records, we should have a specific template where we can show an image or some text that shows that the Gantt chart could not be displayed since there is no data.

Attached is a sample implementation which can be used as a temporary workaround. To run the project, place the .NET 4.5 version of the Telerik.Web.UI.dll in the bin folder of the project.
Pending Review
Last Updated: 14 Mar 2018 17:02 by Sam
Hello, this is for the list of columns on the left side of the Gantt, called TreeListView. If it would be possible to add additional columns that we select or implement during data binding, for example: Duration, other dates, description, task type, and many others that the client will select dynamically, so they must not be a static list of columns. 

Thank you,
-Sam