Completed
Last Updated: 19 Jul 2019 08:38 by Manish
You can hide certain characters using "*" in the DisplayMask. For example: 
Mask="####" 
DisplayMask = "**##"

If the value is "1234", after blur it will look like "**34"
The same approach can be used for all mask parts. The only requirement is DisplayMask to be longer or equal to the Mask. For example:
Mask = "<1..999>someLiterals####SomeMoreLiterals<3..123>"
DisplayMask = "***someLiterals**#*Some*******s<1..99>*"
If in the above example the DisplayMask is shorter or does not contains enough asterisks to match the editable parts, the visible value on blur can be wrong.
Approved
Last Updated: 10 Jul 2019 15:56 by ADMIN
I have found that there is a bug when working with tables in the editor in inline editing mode in Safari on Mac - https://demos.telerik.com/aspnet-ajax/editor/examples/inline-editing/defaultcs.aspx.

In the normal editing mode, you can edit the table properties by right clicking inside the table to get the context menu, then choose table properties, add row etc.

In Inline editing mode, it shows the context menu but when you click on any item it says to select the table. None of the other context menu commands like inserting rows etc work.

I have tested on your demo site and you should be able to simulate it there.
In Development
Last Updated: 10 Jul 2019 07:21 by ADMIN
ADMIN
Created by: Rumen
Comments: 0
Category: UI for ASP.NET AJAX
Type: Feature Request
3
The popular control will be similar to Kendo UI drawer widget: https://demos.telerik.com/kendo-ui/drawer/index.
Completed
Last Updated: 04 Jul 2019 07:47 by ADMIN
ADMIN
Created by: Ivan Zhekov
Comments: 2
Category: UI for ASP.NET AJAX
Type: Bug Report
0
When trying to load a light-weight skin from external assembly (other than Telerik.Web.UI.Skins), the path to the files is not resolved correctly, hence no resource is loaded.
Approved
Last Updated: 03 Jul 2019 15:39 by Sunil Sutar

The current colors, #0082CC and #FFFFFF that are used for forecolor and backcolor, have 4.14:1 color contrast ratio: https://webaim.org/resources/contrastchecker/?fcolor=FFFFFF&bcolor=0082CC

The minimum required color contrast ratio is 4.5:1 for AA Compliance, and 7:1 for AAA Compliance.

A possible alternative color for the #0082CC blue can be #007CC.

Completed
Last Updated: 28 Jun 2019 11:02 by ADMIN
Completed
Last Updated: 28 Jun 2019 10:58 by ADMIN
ADMIN
Created by: Pavlina
Comments: 2
Category: UI for ASP.NET AJAX
Type: Bug Report
1

			
Approved
Last Updated: 10 Jun 2019 15:31 by ADMIN
Created by: Sunil Sutar
Comments: 1
Category: UI for ASP.NET AJAX
Type: Feature Request
1

RadCombobox WAI-ARIA improvements 

1. When we have a selection but do not have filtering and custom text:

aria-autocomplete: list ---> Combobox list item
2. When we have selection and filtering: ---> Combobox inline completion list item
aria-autocomplete: both
3. disabled: aria-autocomplete: none 

https://www.w3.org/TR/wai-aria-practices/examples/combobox/aria1.0pattern/combobox-autocomplete-both.html

Approved
Last Updated: 05 Jun 2019 11:26 by ADMIN

Hello,

I enabled the ShowButton property to the radtextbox, but while writing and the words reach the button I can't see the final of the text. 

<telerik:RadTextBox ID="RadTextBox1" runat="server" ShowButton="true"></telerik:RadTextBox>

If I disable the ShowButton and write something in the radtextbox, I can see the final words. 

How I can fix this? 

Thanks,
Edson

Approved
Last Updated: 30 May 2019 07:34 by ADMIN
Please add the new (Core) features for Drawer, PDF Viewer, Adaptive Grid and Adaptive Scheduler to the  ASP.NET AJAX controls.  Thanks.
Approved
Last Updated: 27 May 2019 15:13 by ADMIN
Created by: Randy
Comments: 1
Category: UI for ASP.NET AJAX
Type: Bug Report
1

I have a RadCheckboxList In an ASP Panel. When Enabling/Disabling the panel the CheckBoxList does not Enable/Disable.  I tested this with a simple mock up with additional controls that work as expected:

 

<asp:Panel ID="TestPanel" runat="server" Enabled="true">

<telerik:RadCheckBoxList ID="WeeklyDays" runat="server" Columns="4" AutoPostBack="false">

<Items>

<telerik:ButtonListItem Text="Monday" Value="2" />

<telerik:ButtonListItem Text="Tuesday" Value="4" />

<telerik:ButtonListItem Text="Wednesday" Value="8" />

<telerik:ButtonListItem Text="Thursday" Value="16" />

<telerik:ButtonListItem Text="Friday" Value="32" />

<telerik:ButtonListItem Text="Saturday" Value="64" />

<telerik:ButtonListItem Text="Sunday" Value="1" Selected="true" />

</Items>

</telerik:RadCheckBoxList>

<telerik:RadTextBox ID="TestText" runat="server"></telerik:RadTextBox>

<telerik:RadDatePicker ID="TestDate" runat="server"></telerik:RadDatePicker>

</asp:Panel>

<br />

<telerik:RadCheckBox ID="ToggleEnabled" runat="server" Text="Toggle Panel" AutoPostBack="true" Checked="true" OnCheckedChanged="ToggleEnabled_CheckedChanged"></telerik:RadCheckBox>

 

 

 protected voidToggleEnabled_CheckedChanged(objectsender, EventArgs e)

{

TestPanel.Enabled = Convert.ToBoolean(ToggleEnabled.Checked);

}

Under Review
Last Updated: 22 May 2019 15:49 by ADMIN
Created by: Donald Norris
Comments: 1
Category: UI for ASP.NET AJAX
Type: Feature Request
0

A function that will return a thumbnail of the requested size and the page of a multipage pdf document.

 

Don

Approved
Last Updated: 22 May 2019 15:38 by ADMIN
Created by: Chris Dalessandri
Comments: 1
Category: UI for ASP.NET AJAX
Type: Bug Report
0

Reproduction steps:

Go to the Telerik demo at https://demos.telerik.com/aspnet-ajax/textbox/overview/defaultcs.aspx
In the Comment box, type "one two".  Do not let the textbox lose focus.
Highlight "two" and start to drag it to move it before "one". The other text ("one") will disappear, and is gone forever, as far as I can tell.

It can be also reproduced with this configuration:

<telerik:RadTextBox RenderMode="Lightweight" runat="server" ID="RadTextBox3" Width="200px" EmptyMessage="Enter comment" TextMode="MultiLine" Height="100px" Resize="None"></telerik:RadTextBox>

Completed
Last Updated: 16 May 2019 15:54 by ADMIN
Created by: Sergey
Comments: 1
Category: UI for ASP.NET AJAX
Type: Bug Report
3

Hello,

There seems to be a bug with the RadEditor "Find and Replace" feature. I have recorded a screencast available here documenting the issue and will also provide below the information written: https://www.screencast.com/t/MXFawxIPp

Reproduction Steps:

Expected: '<img' is replaced with '<picture'

Actual:'<img' is replaced with '&lt;picture'

Notes:This seems to be an issue with encoding as &lt; is a less than tag. As you can see in the video, I do not think there is a way to escape the character to allow it to be replaced correctly. If you have additional questions, please ask.

 

Best Regards

Approved
Last Updated: 07 May 2019 11:43 by ADMIN
In Classic RenderMode, Windows7 skin, TreeView nodes are higher when inside ContentTemplate of RadPanelBarItem:



<div>
    wrong:
    <telerik:RadPanelBar RenderMode="Classic" Skin="Windows7" runat="server" ID="RadPanelBar1" Width="100%" Height="100%">
        <Items>
            <telerik:RadPanelItem Text="Custom" Expanded="true">
                <ContentTemplate>
                    <telerik:RadTreeView RenderMode="Classic" Skin="Windows7" ID="radTreeView" runat="server">
                        <Nodes>
                            <telerik:RadTreeNode  Text="Custom">
                                <Nodes>
                                </Nodes>
                            </telerik:RadTreeNode>
                            <telerik:RadTreeNode  Text="Custom">
                                <Nodes>
                                </Nodes>
                            </telerik:RadTreeNode>
                            <telerik:RadTreeNode  Text="Custom">
                                <Nodes>
                                </Nodes>
                            </telerik:RadTreeNode>
                        </Nodes>
                    </telerik:RadTreeView>
                </ContentTemplate>
            </telerik:RadPanelItem>
        </Items>
    </telerik:RadPanelBar>
</div>
<div>
        OK:
    <telerik:RadTreeView ID="radTreeView2" RenderMode="Classic" Skin="Windows7" runat="server">
        <Nodes>
            <telerik:RadTreeNode Text="Custom">
                <Nodes>
                </Nodes>
            </telerik:RadTreeNode>
            <telerik:RadTreeNode  Text="Custom">
                <Nodes>
                </Nodes>
            </telerik:RadTreeNode>
            <telerik:RadTreeNode  Text="Custom">
                <Nodes>
                </Nodes>
            </telerik:RadTreeNode>
        </Nodes>
    </telerik:RadTreeView>
</div>


Pending Review
Last Updated: 02 May 2019 08:52 by ADMIN
Created by: Vance
Comments: 1
Category: UI for ASP.NET AJAX
Type: Bug Report
0

Steps to repro:

1. Go to https://demos.telerik.com/aspnet-ajax/chat/toolbar/defaultcs.aspx

2. Show the toolbar with the ellipses

3. Enter enough messages so that the scroll is shown and continue to enter

4. The toolbar drop down on each click of an icon

See the attached video for more information.

Pending Review
Last Updated: 26 Apr 2019 13:41 by Nagendra

Description:

If RadGrid has UseStaticHeaders enabled, different HTML Tables are rendered and instructing JAWS to read the tables one by one will also read the Header. It would say Header with "n" number of columns and one rows, since the table has only one row and that is containing the Column Names.

Goal:

It would be great, if the grid with Static Header could be made in a way that JAWS will only treat the grid as one Table instead of two separate tables.


Pending Review
Last Updated: 19 Apr 2019 13:20 by Jon
RadCodeBLock and RadScriptBlock is not able to handle the server tags for all case scenarios, hence RadAjaxManager throws the exception mentioned in the title.
1 2 3 4 5 6