Pending Review
Last Updated: 22 Feb 2017 16:47 by Adam Nelson
Created by: Adam Nelson
Comments: 0
Category: PanelBar
Type: Feature Request
1
Please consider adding a ClientVisible or Display property to panel bar items that we can set server side to control the initial visibility of items on the client.

In the screenshot you can see the PanelBar and a menu to filter items to display. I like what I have except for the fact that I have to run javascript to filter items on each page load and async update based on the selected filter.

RadGrid has a property Display for columns which allows the column to be sent to the client but not be visible initially. I just want something like that for the PanelBar.

Thank you for your consideration.
Pending Review
Last Updated: 16 Feb 2017 12:53 by Mauro
Created by: Mauro
Comments: 0
Category: Scheduler
Type: Feature Request
1
In a RadScheduler with a custom provider (inheriting from SchedulerProviderBase), there is no way to get "expanded" appointments (i.e. masters plus occurrences minus exceptions). 

I devised a solution (as suggested in http://www.telerik.com/forums/scheduler-exporting-a-range-of-appointments), using the Occurrences property of RecurrenceRule:

        public IEnumerable<Appointment> GetExpandedAppointments(RadScheduler owner, DateTime start, DateTime end)
        {
            var result = new List<Appointment>();

            foreach (Appointment a in this.GetAppointments(owner))
            {
                // see http://www.telerik.com/forums/scheduler-exporting-a-range-of-appointments
                if (a.RecurrenceState == RecurrenceState.Master)
                {
                    RecurrenceRule parsedRule;
                    RecurrenceRule.TryParse(a.RecurrenceRule, out parsedRule);
                    parsedRule.SetEffectiveRange(start, end);

                    int nc = 0;
                    foreach (DateTime occurrence in parsedRule.Occurrences)
                    {
                        Appointment app = a.Clone();
                        app.ID = a.ID + "_" + ++nc;
                        app.Start = occurrence;
                        app.End = occurrence.Add(a.Duration);
                        app.RecurrenceRule = null;
                        app.RecurrenceParentID = a.ID;
                        app.RecurrenceState = RecurrenceState.Occurrence;
                        result.Add(app);
                    }
                }
                else if (a.RecurrenceState != RecurrenceState.Occurrence)
                {
                    result.Add(a);
                }
            }

            return result;
        }
    }

I think this functionality can be part of SchedulerProviderBase, there is no custom logic.

Thanks

Regards

Mauro
Pending Review
Last Updated: 13 Feb 2017 14:58 by Stephen
Created by: Stephen
Comments: 0
Category: OrgChart
Type: Feature Request
1
It would be useful if the RadOrgChart control had a mechanism for grouping employees/entities in a department. An example would be a Sales Department at a leaf node made up of managers. The department would have an additional group indicator on it, but selecting an individual manager in the group would drill through to that manager and his reports. With the current behaviour, if a single VP manages sales and finance, all reports beneath them would look the same.
Pending Review
Last Updated: 10 Feb 2017 15:15 by Doug
radgrid exporttoexcel and all exports (word, pdf, csv, excel) should be able to export to file on server without the browser also sending the file to the client.
Pending Review
Last Updated: 23 Jan 2018 22:11 by Fuzuli
Created by: Chris
Comments: 2
Category: Wizard
Type: Feature Request
4
Currently the only way to do anything with the default RadWizard navigation buttons (Cancel, Previous, Next, Finish) is to change the localization of them.  Doing this workaround, however, will lose you the option to have any reasonable form of localization in your program.

So this is a request to add templates to allow developers to create their own sets of buttons, and expose control of the area to developers completely so they may instead redesign the whole area if they wish.
Pending Review
Last Updated: 01 Feb 2017 14:48 by Mike
Created by: Mike
Comments: 0
Category: SearchBox
Type: Feature Request
1
Please implement WAI-ARIA support in RadSearchBox with and without a Search Context.

It needs the same type of logic added as the AutoComplete and ComboBox control so that JAWS can speak and navigate the list items properly.
It looks like there was a little started because it renders an ARIA live region for status, but never writes to it from what I can tell.

I know this document lists the current controls that support ARIA - http://docs.telerik.com/devtools/aspnet-ajax/controls/wai-aria-support-and-screen-readers

Thanks,
Mike
Pending Review
Last Updated: 19 Jan 2017 23:06 by bryan
Created by: bryan
Comments: 0
Category: DropDownList
Type: Feature Request
1
When the LIST is displayed in a RadDropDownList, the datasource is usually a lookup table.  Therefore,  it is not practical to set the LIST attribute "DropdownWidth" to a fixed number of pixels, since items can be added to the lookup table where the text length is longer than any currently in the table.   If you text is too long for the LIST width, the text wraps and this is not a pleasant user experience.  

This control needs an autosize feature for the LIST, so it fits the longest text without causing wrapping.   This feature already exists on the RadComboBox with attributes DropDownAutoWidth="Enabled" and "NoWrap=true".   These should also be used I the RadDropDownList so the LISTS work identically.
Pending Review
Last Updated: 19 Jan 2017 05:04 by Sumit
Created by: Sumit
Comments: 0
Category: UI for ASP.NET AJAX
Type: Feature Request
0
I have attached an image which shows the required filter output.

Left panel had filters and on right data is displayed. Do you guys have any tool which can give the required output. Rather me using multiple controls to achieve the required functionality.
Pending Review
Last Updated: 11 Jan 2017 14:15 by Albert Shenker
When using keyboard navigation, the ESC key currently does some things properly (like closing out of batch editing forms). However, it does not prevent the firing of certain update events (like BatchEditCellValueChanged). The ESC key should act like a "cancel" key, so no update events should fire when it is pressed.
Pending Review
Last Updated: 11 Jan 2017 14:12 by Albert Shenker
Created by: Albert Shenker
Comments: 0
Category: Grid
Type: Feature Request
1
The client-side KeyPress event is falling out of favor and the KeyDown even is being used more. Please implement an OnKeyDown event for the Grid, just like you currently have an OnKeyPress event
Pending Review
Last Updated: 02 Jan 2017 10:37 by Slim
Created by: Slim
Comments: 0
Category: UI for ASP.NET AJAX
Type: Feature Request
0
I'd like to use several masks in order to accept many phone numbers format. 
The component must accept phone numbers with these separators : "-", "/", "|" and space between figures. 
Here are some example of format that i mean:

1- xx-xx-xx-xx-xx 2- xx - xx - xx - xx - xx 
3- xx.xx.xx.xx.xx 4- xx/xx/xx/xx/xx 
5- xx / xx / xx / xx 6- xx|xx|xx|xx|xx 
7- xx | xx | xx | xx 

Evidently, the component needs to accept figures only. Most of the time, the phone numbers are inserted by a copy-pasted
Pending Review
Last Updated: 22 Dec 2016 22:26 by bryan
When in batch edit mode, using standard asp.net validation controls will display the validation error within the cell, and expand the cell contents horizontally and possibly vertically as well.  This is a very ugly (and clunky) way to show validation messages in a batch edit mode.  

It would be nice if instead, we could set an grid attribute that specifies a row backcolor when validation fails for a row.  In addition, show that rows validation messages automatically in a tooltip or radtooltip as the user hovers the mouse over the row when it signifies the exception backcolor.  These messages could be assigned to a columns markup as an attribute.   

Another nice to have is to show a  section on the grid (perhaps under the header) that could display to alert the user when validation had failed.
Pending Review
Last Updated: 22 Dec 2016 11:44 by Tejas
Created by: Tejas
Comments: 0
Category: Scheduler
Type: Feature Request
0
Dear Sir,

I used telerik:RadScheduler with Exchange Scheduler Provider.
I am successfully connected to Exchange server and also I able to display data on scheduler form exchange

But problem is how can i refresh scheduler data real time?

My requirement is if meeting cancel or new Meeting at the same time scheduler update the information on display.
Below code ios for your reference.
ExchangeSchedulerProvider provider1 =
      new ExchangeSchedulerProvider(@"https://owa.xyz.com/EWS/Exchange.asmx", "user name", "Password", "Domain", "tejas_k_lodha@milacron.com");
Thanks,
Pending Review
Last Updated: 19 Dec 2016 08:15 by Daniel Molnar
Created by: Daniel Molnar
Comments: 0
Category: PanelBar
Type: Feature Request
1
Hi,

I would like to forward a feature request to you and support to resize the PanelBar dynamically you can found a video which demonstrate the functionality. We would like to support minimized navigation and provide more working space for those whose using smaller resolutions.

Thanks in advanced,
Daniel
Pending Review
Last Updated: 18 Dec 2016 06:00 by Rakesh
Pending Review
Last Updated: 06 Dec 2016 07:47 by Henric
Created by: Henric
Comments: 0
Category: Diagram
Type: Feature Request
0
Hi!

We would like to create end user possibility to change diagram type.

It would also be nice to be able to searilize all settings from the diagram component.

Is this possible or is it a planned feature?

Best regards
Henric
Pending Review
Last Updated: 01 Dec 2016 14:53 by Matt
Created by: Matt
Comments: 0
Category: Spreadsheet
Type: Feature Request
1
The spreadsheet adjusts the width based on how many toolbar items are available.  The width property doesn't help. It would be nice to have the spreadsheet list of tools to collapse if a width is specified that is smaller than the toolbar row at the top.  I don't always want the spreadsheet to be the same width as the tools that are available.
Pending Review
Last Updated: 18 Nov 2016 20:27 by Dave
You should be able to prevent the horizontal/vertical overlapping of routed connections . This way the connections should be easier to differentiate.

1. Could this be a setting where there is no overlapping of connections?

2. Even if I use a different color (red) for HoverSettings only the most recent created connection is displayed.  At make the selected (Hovered) selection show when clicked.

3.  This is a show stopper for us.  We might have to try a different product because our clients need to differentiate the different paths (connections) in a complex Diagram.

There is a similar request for this same missing feature in your other products at
https://feedback.telerik.com/Project/143/Feedback/Details/134524-diagram-add-a-way-to-prevent-overlapping-of-routed-connections

Pending Review
Last Updated: 09 Nov 2016 07:29 by CCG
Created by: CCG
Comments: 0
Category: Calendar
Type: Feature Request
0
When using min/max date the invalid dates have almost identical styling as the valid ones, this makes it hard for the user to see what dates are valid.

It would be nice of there was some way of telling them apart except by hovering over them.

Also when using "metro theme" the invalid date overrides the styling for dates belonging to "other month".